Manufacturing Inconel Products

ASTM B163 Inconel 600 Seamless Tubes / alloy 600 Tubing UNS N06600

Steel Tubes offer ASTM B163 Inconel 600 Seamless Tubes, alloy 600 Tubing, UNS N06600 Seamless Tubes, Inconel 600 Tube, Alloy 600 Tube, N06600 Tube , Inconel 600 Tubing, Alloy 600 Tubing suppliers in India

Steel Tubes India is manufacturer, exporter & suppliers of ASTM B163 Inconel 600 Seamless Tubes, alloy 600 Tubing, UNS N06600 Seamless Tubes in India

Home / Products / Nickel Alloys / Inconel 600 / ASTM B163 Inconel 600 Seamless Tubes

ASTM B163 Inconel 600 Seamless Tubes at Steel Tubes India FactoryNi 72.0, Cr 15.5, Fe 8.0 Mn 1.0 C 0.15 Cu 0.5 Si 0.5 S 0.015

High Performance Alloys stocks and produces this grade in the following forms: Bar, wire, sheet, plate, coil, fasteners and forgings. Request quote on this grade.

Overview
A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments.

Alloy 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000 deg F(1093 deg C). The high nickel content of the alloy enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.

Its chromium content gives the alloy resistance to sulfur compounds and various oxidizing environments. The chromium content of the alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions like hot, concentrated nitric acid, 600 has poor resistance. Alloy 600 is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide.

Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Alloy 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.

Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.

Whatever the specification, grade or service, we offer the best solutions for you - making the difference.

At Steel Tubes India, we offer all our customers:

  • Production flexibility that meets their schedules
  • Quality steel tube whatever their requirement
  • A trustworthy partnership

Contents



ASTM B163 Inconel 600 Seamless Tubes

ASTM B163 Inconel 600 Seamless Tubes ready to export

Manufacturer | Exporter | Suppliers | Stockist  

Inconel 600 Tube
ASME SB-163 ASME SB-516 ASME SB751 AMS 5580

UNS N06600 also available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube at industrial rate.

ASTM B163 Inconel 600 Seamless Tubes

Stainless Steel Pipes and Tubes Application

Applications

Thermocouple sheaths.
Ethylene dichloride (EDC) cracking tubes.
Conversion of uranium dioxide to tetrafluoride in contact with hydrofluoric acid.
Production of caustic alkalis particularly in the presence of sulfur compounds.
Reactor vessels and heat exchanger tubing used in the production of vinyl chloride.
Process equipment used in the production of chlorinated and fluorinated hydrocarbons.
In nuclear reactors uses are for such components as control rod inlet stub tubes, reactor vessel components and seals, steam dryers and d separators in boiling water reactors. In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc.
Furnace retort seals, fans and fixtures.
Roller hearths and radiant tubes, in carbon nitriding processes especially.

ASTM B163 Inconel 600 Seamless Tubes

ASTM B163 Inconel 600 Seamless Tubes ready to shipping

Inconel 600 is a nickel-chromiumsuper alloy. It is readily weldable and non-magnetic in nature and used in various corrosion resisting applications. The chromium content of the Inconel 600 provides resistance to weaker oxidizing environments while the high nickel content provides exceptional resistance to chloride stress corrosion cracking and a level of resistance to reducing environments.

USES of Inconel 600
Thermocouples
Inconel 600
Nuclear Components
Inconel 600
Paper & Pulp Industry
Inconel 600
Heat Exchanger
Inconel 600
Chlorination Equipment
Inconel 600
Petrochemical

 

 

ASTM B163 Inconel 600 Seamless Tubes packaging & shipping policy

ASTM B163 Inconel 600 Seamless Tubes is sleeved into plastic bag individually, ten pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.

ASTM B163 Inconel 600 Seamless Tubes packed
ASTM B163 Inconel 600 Seamless Tubes packed
ASTM B163 Inconel 600 Seamless Tubes packed
ASTM B163 Inconel 600 Seamless Tubes packed

Fabrication with Inconel 600
Alloy 600 can be both hot formed and cold formed using typical processes. Hot working should be performed between 1600° F and 2250° F avoiding any work between1200-1600° F because the ductility decreases in this temperature range. Welding Alloy 600 can be achieved via shielded metal-arc welding, TIG, and MIG.

Fabricating INCONEL ® alloy 600
Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Alloy 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.

600 tube, sheet and plate are almost exclusively supplied in the annealed condition. Bar stock may need to be stress relieved, or annealed before performing any heading operations.

Corrosion resistance
Inconel 600 alloy are resistant to corrosion for a variety of corrosive media. Chromium alloy has better corrosion resistance than the Nickel 99.2 (alloy 200) and Ni 99.2 (alloy 201, a low-carbon) in the oxidation conditions. Meanwhile, the higher nickel content of the alloy make it has good corrosion resistance in reduction conditions and alkaline solution. And can effectively prevent the chlorine - iron stress corrosion cracking. Inconel 600 alloy have good corrosion resistance in acetic acid, acetic acid, YiSuan, stearic acid, organic acids, have medium corrosion resistance in inorganic acid. It has very good corrosion resistance in a nuclear reactor primary and secondary recycling of high purity water. The especially outstanding performance of Inconel 600 is resistant to dry chlorine and hydrogen chloride corrosion, the application temperature can be 650oC. At high temperatures, annealed and solution-treated state of the alloy has a very good antioxidant properties and high peel strength in air. Under high temperature, annealing state and solid solution processing mode of alloy has the very good antioxidant spalling performance and high strength in the air. The alloy resist ammonia nitrogen and permeability, carburizing atmosphere, but in REDOX conditions variations, alloy will be affected by the partial oxidation corrosion of medium (such as green death liquid)

Chemistry

Chemical Requirements

Ni C Mn Cr S Si Fe
Max .15 1.0 17.0 .015 .5 10.0
Min 72.0 14.0 6.0

Tensile Data

Mechanical Property Requirements

Ultimate Tensile Yield Strength (0.2% OS) Elong. in 2 in. or 50mm or 4D, min., % R/A Hardness
Cold Worked/As worked
Min 110 KSi 85 KSi 10
Max    
Min 760 MPa 585 KSi
Max
Hot Worked/As worked
Min 90 KSi 40 KSi 25
Max
Min 620 MPa 275 MPa
Max

D- Forging quality is furnished to chemical requirements and surface inspection only. No mechanical properties required.

Specifications

Form Standard
Metal Type UNS N06600
Bar ASTM B166 AMS 5665 Din 17752
Wire
Sheet ASTM B168 AMS 5540 Din 17750
Plate ASTM B168 AMS 5540 Din 17750
Tube ASTM B167
Pipe ASTM B167
Fitting ASTM B366
Forging ASTM B564 Din 17754
Weld Wire FM 82/ ERNiCr-3
Weld Electrode FM 182/ ENiCrFe-3
Din 2.4816

Current Metal Prices

Price:

The market price for Nickel Alloys has become very volatile in recent months. As a result, we cannot provide exact online pricing for these items.

Inconel 600 Seamless Pipe
FOB Price: US $2000-15000 / Metric Ton

Inconel 600 Seamless Tube
FOB Price: US $300-3000 / Ton

Inconel 600 Welded Pipe
FOB Price: US $400-1500 / Ton

Inconel 600 Welded Tube ASTM B167
FOB Price: US $35-75 / Kilogram

Inconel 600 Sheets
FOB Price: US $30-60 / Kilogram

Inconel 600 Plates
FOB Price: US $20-130 / Kilogram

Inconel 600 Bars
FOB Price: US $20-100 / Kilogram

Inconel 600 Rods
FOB Price: US $35-45 / Kilogram

Inconel 600 Fittings
FOB Price: US $1-2000 / Piece

Inconel 600 Flanges
FOB Price: US $1-2000 / Piece

corrosion resistant Inconel 600 Wire
FOB Price: US $15-35 / Kilogram

Inconel 600 Weldolet
OB Price: US $1-1000 / Piece

Inconel 600 Sockolet
FOB Price: US $1-100 / Piece

Inconel 600 THREDOLET
FOB Price: US $1-1000 / Piece

Inconel 600 Nipolet
FOB Price: US $1-1000 / Piece

Inconel 600 Latrolet
FOB Price: US $0.5-1000 / Piece

Inconel 600 Elbolet
FOB Price: US $1-1000 / Pole

Inconel 600 Sweepolet
FOB Price: US $0.1-1000

Inconel 600 Insert Weldolet
FOB Price: US $1-1000 / Piece

Inconel 600 Coupolet
FOB Price: US $1-90 / Piece

Inconel 600 Nipoflange
FOB Price: US $1-100 / Piece

Please contact for best price at Steel Tubes India - stindia@stindia.com



Available Stock at Steel Tubes India

ASTM b366 Inconel 600 Fittings Stock At a Glance:-

ASTM b366 Inconel 600 Flange Stock At a Glance:-

ASTM b366 Inconel 600 Fasteners Stock At a Glance:-

ASTM b366 Inconel 600 Butt- Welding Fittings Stock At a Glance:-

ASTM b366 Inconel 600 Forged Fittings - Type Thread Fittings Stock At a Glance:-

ASTM b366 Inconel 600 Forged Fittings - Type Socket weld Fittings Stock At a Glance:-

ASTM b366 Inconel 600 OtherProduct Stock At a Glance:-

List of Countries where Steel Tubes India supply:-

List of Countries where Steel Tubes India supply Forged fittings :-

Send quick enquiry:

For more information, please feel free to contact:

Steel Tubes India Logo

Address: Ashtavinayak Building, Office No.303, 3rd Floor,
Sadanand Wadi, V.P. Road, Girgaum, Mumbai-400 004, Maharashtra, India.
Tel: +91 22 61432000 (30 Lines), 23895908, 23822821, 66393996
Email: stindia@stindia.com, stindia@stindia.co.in
Website: www.steeltubesindia.net
Fax: +91 22 23895906
Skype Id:- stindia.jain

 

 

Steel Tubes India is a well known worldwide exporter of award-winning ASTM B163 Inconel 600 Seamless Tubes, Steel Tubes India is commited to provide each and every customer with the highest standard of customer service. We deals in ASTM B163 Inconel 600 Seamless Tubes in India & Overseas, offering a wide range of ASTM B163 Inconel 600 Seamless Tubes.


Contact now!

Call Now
61432000 (30 Lines)
Call Now




Nickel Alloys


Useful Link



Products

Steel Metal Materials


ISO 9001:2008 Certified

Why us?

  • ISO 9001:2008 Certified Company
  • Available Inventory
  • On-Time Delivery Every Time
  • Competitive Prices
  • Quality Product
  • Rapid Response

Do you know?

Winner of All India Award for Export, this is the 5th consecutive year that Steel Tubes has been receiving this award

Shipping worldwide
Home | Directory | Blog | Featured Products | Price Chart | Steel- Manufacturing Process | Videos on You Tube | Enquiry Form | Contact | Sitemap | Conversion

Bosset®, Brazolet®, Buttolet®, Coupolet®, Eco-Seal®, Elbolet®, Flangolet®, Flexolet®, Latrolet®, Nipolet®, Nozzelet®, Olet®, Pipets®, Quikleg 90®, Screwdolet®, Sockolet®, Studdet®, Sweepolet®, Thermalet®, Therm-L-Bow®, Thredolet®, Valvolet®, Vesselet®, Weldolet® are registered Trade Marks of Bonney Forge Corporation; MONEL®,  INCOLOY® and INCONEL® are registered Trade Marks of Special Metals Corporation

© Steel Tubes India 1994-2016. All Rights Reserved.