Inconel Products

Steel Tubes India - Trusted Exporter, distributor and Supplier of Inconel Products

Worldwide industrial exporter for Inconel Pipe, Inconel Tube, Inconel Plate, Inconel Fastener, Inconel Fitting, Inconel Flange, Inconel Forged Fitting, Inconel u-bolt, Inconel drip ring, Inconel swage nipple, Inconel blind spacer, Inconel hollow bar

Steel Tubes India offer Inconel 825 /UNS No. N08825, Inconel 800/UNS No. N08800, Inconel 625 /UNS No. N06625 and Inconel 601/UNS No. N06601, Inconel 600/UNS No. N06600

Home / Products / Inconel

Inconel History

Inconel is a registered trademark of Special Metals Corporation that refers to a family of austenitic nickel-chromium-based superalloys.Inconel alloys are typically used in high temperature applications. We also know Inconel as Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020, these are Inconel Trade names. The Inconel family of alloys was first developed in the 1940s by research teams at Wiggin Alloys (Hereford, England), which has since been acquired by SMC, in support of the development of the Whittle jet engine. Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat.

Find here Inconel properties, inconel compositions, inconel tubing, inconel 718, inconel 625, welding inconel and monel

Inconel Product

Inconel Grade

We are a leading manufacturer from India who is pioneer in Inconel product, located in Mumbai - in the heart of India. Our inconel products are high quality & we are committed to supply material in committed timelines.

Grades

  • Inconel 600 (UNS No. N06600)
  • Inconel 601 (UNS No. N06601)
  • Inconel 617
  • Inconel 625 (UNS No. N06625)
  • Inconel 718
  • Inconel 750
  • Inconel 800 (UNS No. N08800)
  • Inconel 825 (UNS No. N08825)

 

Inconel 600
Inconel 625
Inconel 718
Inconel 800
Inconel 825
Inconel 600 Pipes
Seamless Pipe
ERW Pipe
Inconel 600 Tubes
Inconel 600 Seamless Tubes
Inconel 600 ERW Tubes
Inconel 600 Buttweld Fittings
Inconel 600 Elbow
Inconel 600 Tee
Inconel 600 Cap
Inconel 600 Reducer
Inconel 600 Stub end
Inconel 600 Nipple
Inconel 600 Forged Fittings
Inconel 600 Forged Elbow
Inconel 600 Forged Tee
Inconel 600 Union
Inconel 600 Cross
Inconel 600 Coupling
Inconel 600 Swage Nipple
Inconel 600 Boss
Inconel 600 Plug
Inconel 600 Insert
Inconel 600 Bushing
Inconel 600 Olets
Inconel 600 Elbolet
Inconel 600 Weldolet
Inconel 600 Sockolet
Inconel 600 THREDOLET
Inconel 600 Sweepolet
Inconel 600 Latrolet
Inconel 600 Nipolet
Inconel 600 Flanges
Inconel 600 Flange
Inconel 600 Blind Flanges
Inconel 600 Slip On Flanges
Inconel 600 Weld Neck Flanges
Inconel 600 Socket Weld Flanges
Inconel 600 Reducing Flanges
Inconel 600 Lap Joint Flanges
Inconel 600 Screwed Flanges
Inconel 600 Fasteners
Inconel 600 Bolt
Inconel 600 Nuts
Inconel 600 Stud
Inconel 600 Screw
Inconel 600 Washer
Inconel 600 Round Bar
Inconel 600 Round Bar
Inconel 600 Plates & Coils
Inconel 600 Plates & Coils
Inconel 600 Sheets
Inconel 600 Sheets
Inconel 625 Pipes
Inconel 625 Seamless Pipe
Inconel 625 ERW Pipe
Inconel 625 Tubes
Inconel 625 Seamless Tubes
Inconel 625 ERW Tubes
Inconel 625 Buttweld Fittings
Inconel 625 Elbow
Inconel 625 Tee
Inconel 625 Cap
Inconel 625 Reducer
Inconel 625 Stub end
Inconel 625 Nipple
Inconel 625 Pipe Fittings
Inconel 625 Forged Fittings
Inconel 625 Forged Elbow
Inconel 625 Forged Tee
Inconel 625 Union
Inconel 625 Cross
Inconel 625 Coupling
Inconel 625 Swage Nipple
Inconel 625 Boss
Inconel 625 Plug
Inconel 625 Insert
Inconel 625 Bushing
Inconel 625 Olets
Inconel 625 Elbolet
Inconel 625 Weldolet
Inconel 625 Sockolet
Inconel 625 THREDOLET
Inconel 625 Sweepolet
Inconel 625 Nippolet
Inconel 625 Latrolet
Inconel 625 Flange
manufacturer
Inconel 625 Blind Flanges
Inconel 625 Slip On Flanges
Inconel 625 Weld Neck Flanges
Inconel 625 Socket Weld Flanges
Inconel 625 Reducing Flanges
Inconel 625 Lap Joint Flanges
Inconel 625 Screwed Flanges
Inconel 625 Fasteners
Inconel 625 Bolt
Inconel 625 Nuts
Inconel 625 Stud
Inconel 625 Screw
Inconel 625 Washer
Inconel 625 Round Bar
Inconel 625 Sheets
Inconel 625 Plates & Coils
Inconel 718 Pipes
Inconel 718 Tubes
Inconel 718 Pipe Fittings
Inconel 718 Elbow
Inconel 718 Tee
Inconel 718 Cap
Inconel 718 Reducer
Inconel 718 Stub end
Inconel 718 Nipple
Inconel 718 Round Bar
Inconel 718 Forged Fittings
Inconel 718 Forged Elbow
Inconel 718 Forged Tee
Inconel 718 Union
Inconel 718 Cross
Inconel 718 Coupling
Inconel 718 Swage Nipple
Inconel 718 Boss
Inconel 718 Plug
Inconel 718 Insert
Inconel 718 Bushing
Inconel 718 Flanges
Inconel 718 Blind Flanges
Inconel 718 Slip On Flanges
Inconel 718 Weld Neck Flanges
Inconel 718 Socket Weld Flanges
Inconel 718 Reducing Flanges
Inconel 718 Lap Joint Flanges
Inconel 718 Screwed Flanges
Inconel 718 Plates & Coil
Inconel 718 Fasteners
Inconel 718 Bolt
Inconel 718 Nut
Inconel 718 Stud
Inconel 718 Screw
Inconel 718 Washer
Inconel 718 Sheet
Inconel 800 Pipes
800 Pipes
Inconel 800 Tubes
Inconel 800 Tubes
Inconel 800 Pipe Fittings
Inconel 800 Elbow
Inconel 800 Tee
Inconel 800 Cap
Inconel 800 Reducer
Inconel 800 Stub end
Inconel 800 Nipple
Inconel 800 Forged Fittings
Inconel 800 Forged Elbow
Inconel 800 Forged Tee
Inconel 800 Union
Inconel 800 Cross
Inconel 800 Coupling
Inconel 800 Swage Nipple
Inconel 800 Boss
Inconel 800 Plug
Inconel 800 Insert
Inconel 800 Bushing
Inconel 800 Flanges
Inconel 800 Blind Flanges
Inconel 800 Slip On Flange
Inconel 800 Weld Neck Flanges
Inconel 800 Socket Weld Flanges
Inconel 800 Reducing Flanges
Inconel 800 Screwed Flanges
Inconel 800 Plates & Coil
800 Plates & Coil
Inconel 800 Sheets
800 Sheets
Inconel 800 Round Bar
Inconel 800 Fasteners
Inconel 800 Bolt
Inconel 800 Nuts
Inconel 800 Stud
Inconel 800 Screw
Inconel 800 Washer

Inconel 825 Pipes
Inconel 825 Forged Fittings
Inconel 825 Forged Elbow
Inconel 825 Forged Tee
Inconel 825 Union
Inconel 825 Cross
Inconel 825 Coupling
Inconel 825 Swage Nipple
Inconel 825 Boss
Incoanl 825 Plug
Inconal 825 Insert
Inconel 825 Bushing
Inconel 825 Pipe Fittings
Inconel 825 Elbow
Inconel 825 Tee
Inconel 825 Cap
Inconel 825 Reducer
Inconel 825 Stub end
Inconel 825 Nipple
Inconel 825 Tubes
Inconel 825 Flange supplier
Inconel 825 Flange
Inconel 825 Blind Flanges
Inconel 825 Slip On Flanges
Inconel 825 Weld Neck Flanges
Inconel 825 Socket Weld Flanges
Inconel 825 Reducing Flanges
Inconel 825 Lap Joint Flanges
Inconel 825 Screwed Flanges
Inconel 825 Round Bar
825 Round Bar
Inconel 825 Plates & Coil
825 Plates & Coil
Inconel 825 Sheet
Inconel 825 Fasteners
825 Bolt
825 Nuts
825 Stud
825 Screw
825 Washer

 

 

 

 

 

 

 

 

 

Inconel/Incoloy and Monel are Registered Trademarks of Special Metals Corporation and its subsidiaries.

Inconel 800 Technical Data

Trade Names :
Incoloy 800H®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220

Description: Inconel 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures. It is useful for high-temperature equipment in the petrochemical industry because the alloy doesn't form the embrittling sigma phase after long time exposure at 1200 Degrees F (649 Degrees C). Its have excellent resistance to chloride stress-corrosion cracking is another important feature of Inconel 800.

Applications: Inconel Alloy 800 is used for process piping/tubing, heating-element sheathing, heat exchangers, carburizing equipment and nuclear steam-generator tubing. UNS N08800 is available in various forms like stub end, U-bolt, hollow bar, pipe end cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless/ERW pipe, sheet, tee and tube.

Specifications: Inconel 800 - UNS N08800, Inconel 800H - UNS N08810, Inconel 800HT - UNS N08811, Werkstoff Nr 1.4876

Chemical Analysis of ALLOY 800 UNS/N08800

C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Al + Ti Grain
.10 max         19.0 -23.0 30.0 -35.0         0.15 -0.60 0.15 -0.60 39.5 min 0.30 1.20  

Specifications

Rod Bar Wire Forgings Plate Sheet
ASTM B 408, ASME SB 408, ISO 9723, BS 3076NA15, DIN 17460, EN 10095 AMS 5766, ASTM B 408, ASME SB 408, ISO 9723, BS 3076NA15, DIN 17460, EN 10095
ISO 9724, BS 3075NA15
AMS 5766, ASTM B564, ASME SB 564, ASME Code Case 1949, ISO 9725, DIN 17460 AMS 5871, ASTM A 240/A 480, ASME SA 240/SA 480, ASTM B 409/B 906, ASME SB 409/SB 906, BS 3072NA15, DIN 17460, EN 10028-7, EN 10095 AMS 5871, ASTM A 240/A 480, ASME SA 240/SA 480, ASTM B 409/B 906, ASME SB 409/SB 906, BS 3072NA15, DIN 17460, EN 10028-7, EN 10095
Strip Pipe Tube Other All  
AMS 5871, ASTM A 240/A 480, ASME SA 240/SA 480, ASTM B 409/B 906, ASME SB 409/SB 906, BS 3073NA15, DIN 17460, EN 10028-7, EN 10095 ASTM B 407/B 829, ASME SB 407/SB 829 (Seamless Pipe), BS 3074NA15 (Seamless Pipe), DIN 17459 ASTM B 163, ASME SB 163 (Seamless Condenser & Heat Exchanger Tubes), ASTM B 407/B 829, ASME SB 407/SB 829 (Seamless Tube), ASTM B 515/B 751, ASME SB 515/SB 751 (Welded Tubes), BS 3074NA15 (Seamless Tubes), ISO 6207, DIN 17459 ASTM B 366, ASME SB 366 (Fittings) - ASME Code Cases N201 & N254 (All products for nuclear construction), ISO 4955A (General), NACE MR-01-75, AFNOR Z5 NC 35-20 ASME Code Case 1325, SEW 470, VdTUV 412 and 434,  

Also Available :

 

Inconel 825 Technical Data

Trade Names :
Incoloy 825®, Nickelvac® 825, Nicrofer® 4221

Inconel 825 has good corrosion resistance to sulfuric and phosphoric acids and seawater. It is similar to A800 but has improved resistance to aqueous corrosion. It also has excellent resistance in neutral chloride media, stress-corrosion cracking and satisfactory resistance to pitting and crevice corrosion. Used in temperatures up to 1020 Degrees F. Applications are phosphoric acid evaporators, pickling equipment, chemical process equipment, propeller shafts, oil and gas well piping and nuclear fuel element dissolvers. The hot - working range for Incoloy 825® is 1600 to 2150° F. The material has good weldability by all conventional processes.

These inconel 825, alloy 825 and incoloy 825 available in various forms like hollow bar, u-bolt, stub end, seamless pipe, ERW/welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, fasteners, pipe end cap, elbow, erw pipes, reducer, round bar, tee, tube, pipe fittings and flanges.

UNS N08825 is available in various forms like pipe end cap, u-bolt, stub end, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.

Chemical Analysis of ALLOY 800 UNS/N08800

C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Al + Ti Grain
.05 max 1.0 max   .03 max .5 max 19.5 – 23.5 38.0 – 46.0 2.5 – 3.5 1.5 – 3.0     0.6 1.2 0.2 max 22.0 min    

Check out where we supply products:


Contact now!

Call Now
61432000 (30 Lines)
Call Now




Nickel Alloys


Useful Link



Products

Steel Metal Materials


ISO 9001:2008 Certified

Why us?

  • ISO 9001:2008 Certified Company
  • Available Inventory
  • On-Time Delivery Every Time
  • Competitive Prices
  • Quality Product
  • Rapid Response

Do you know?

Winner of All India Award for Export, this is the 5th consecutive year that Steel Tubes has been receiving this award

Shipping worldwide

Home | Directory | Blog | Featured Products | Price Chart | Steel- Manufacturing Process | Videos on You Tube | Enquiry Form | Contact | Sitemap | Conversion

Bosset®, Brazolet®, Buttolet®, Coupolet®, Eco-Seal®, Elbolet®, Flangolet®, Flexolet®, Latrolet®, Nipolet®, Nozzelet®, Olet®, Pipets®, Quikleg 90®, Screwdolet®, Sockolet®, Studdet®, Sweepolet®, Thermalet®, Therm-L-Bow®, Thredolet®, Valvolet®, Vesselet®, Weldolet® are registered Trade Marks of Bonney Forge Corporation; MONEL®,  INCOLOY® and INCONEL® are registered Trade Marks of Special Metals Corporation

© Steel Tubes India 1994-2016. All Rights Reserved.