Flange- Steel Flanges manufacturer & exporter

Flange- Stainless Steel Flanges

Steel Tubes export 316 Steel Flanges, Stainless Steel Flanges, forged Flanges, Weld Neck Flanges worldwide

worldwide industrial distributor and suppliers of Steel Flanges, Stainless Steel Flanges, forged Flanges, Weld Neck Flanges etc.

Home / Products / Steel Flanges

Pipe Flanges are widely used as a popular category of pipe fittings. A flange is used to mechanically connect two pipes together. It can also be used to mechanically connect a pipe to a tee, valve, choke or any other piece of equipment. Flanges are available in round, square, and rectangular shapes. In some cases, flanges are usually in the shape of a ring or a plate to form a rim at the end of a pipe when fastened to the pipe. This is an example of closet flange. A flange can also be a plate for covering or closing the end of a pipe. This is a blind flange. Thus, flanges are considered to be projecting or internal components which are used to support mechanical parts. They are like rims which are used to strengthen the mechanical part or they are a means of attaching that part to another part or surface.

Steel Tubes India manufacture & export both "flange" and "steel flanges" in all grades, size from India to Saudi Arabia, Middle East, UAE, Oman, Bahrain, Kuwait, Lebanon, Egypt, Turkey, Qatar, Yemen, Iran, Iraq, Nigeria, Brazil, Mexico, Venezuela, Chile, South Africa, South America.

Steel Flanges

From Steel Tubes Diary

METHODS OF USING WELDING FLANGES TO PIPE

The methods used in welding flanges to pipe will vary according to the type of flange and are basically the same as those used in standard welding practices. For welding Neck and Lap Joint Stub and Flange applications an initial root gap spacing between pipe and flange should be 1/16” to 1/8”.



Stainless Steel Flanges
Stainless Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges are available in all types and pressures. To order a reducing flange, state the smaller size first, then the outside diameter of the larger size. Example: 1" X 71/2" O.D.
150 SO RF reducing would be a 3" X 1" Slip-on, Raised Faced Reducing. Or, to simplify, just state the actual pipe sizes in order of larger to smaller. Example: 3" X 1" Slip-on, Raised Faced, Reducing. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


ASTM A105 Carbon Steel Flanges
304 Steel flanges

Manufacturer | Exporter | Suppliers | Stockist  

A266/A266M Specification for Carbon Steel Forgings for Pressure Vessel Components, A370 Test Methods and Definitions for Mechanical Testing of Steel Products, A675/A675M Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties. A696 Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components, A788/A788M Specification for Steel Forgings, General Requirements, A961/A961M Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications read more

Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Slip on flanges (SORF/SOFF)
Slip on flanges

Manufacturer | Exporter | Suppliers | Stockist  

Slip-on flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Weld Neck Flanges (WNRF)
Weld Neck Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We provide Welding Flanges that are available in two forms, one is socket welding flanges and another is welding neck type flanges. Fabricated using quality forged carbon steel, our range is widely used in various industry applications. These can be customized as per the requirements of clients.

read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Long Weld Neck Flanges
Long Weld Neck Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Our expert team allows us to manufacture Long Weld Neck Flanges in the steel market. These products are designed as per the average of using high grade steel materials. It is made with nickel, carbon and steel. The size of the flanges is ½”NB To 36”NB. This flange is used in connecting the pipes with different dimensions. The price of this product is quite reasonable. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500

 



Blind Flanges (BLRF)
Blind Flanges

Manufacturer | Exporter | Suppliers | Stockist  

A popular category of pipe flange is the blind flange. A blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles. This flange helps in easy access to a line once it has been sealed. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Threaded Flanges (THRF)
Threaded Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Threaded flanges are widely demanded as pipe flanges i.e called as threaded pipe flanges used in different industrial applications. They are the special type of pipe flanges which can be attached to the pipe without welding. Threaded flanges are threaded in the bore which match an external thread on the pipe. These threads are tapered in order to create a seal between the threaded flange and the pipe as the tapers approach the same diameter. Sometimes a seal weld is also used together with the threaded connection. They are available in various sizes and materials. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Plate Flanges
Plate Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Plate flanges are special types of flanges that have raised face and back ups. Made from quality mill plates, these flanges have high weldability & hardenability. Our range of plate flanges can be availed in different dimensional specifications depending upon the requirements and their applications. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Lap Joint Flanges
Lap Joint Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We offer Lapped Flanges, which are designed using IS and ASTM standards carbon steel i.e carbon steel flanges. These are available in varied sizes, shapes and dimensions to suit the requirement of clients. The lapped flanges are widely used in steel plants, sugar mills & distilleries, pumps and petrochemicals, cement and construction industries. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Square Flange
Square Flange

Manufacturer | Exporter | Suppliers | Stockist  

Backed by our state-of-the-art manufacturing facility, we are capable of providing our clients with a comprehensive range of Square Flanges that is available in various sizes and specifications. Our range is manufactured using high grade raw material, which is sourced from the reliable and certified vendors of the market to ensure quality. Moreover, our range can be customized as per the specifications detailed by the clients to fulfill their exact requirements in a better way. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Socket Weld Flanges
Socket Weld Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to reface the socket weld flange as would be required with slip-on flanges. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Spectacle Blind Flanges
Spectacle Blind Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We offer spectacle flanges that are fabricated with optimum quality stainless steel & alloys. These are available in various technical specifications and in forms such as Slip On, Socket Weld, Blind, Lapped, Screwed, Weld Neck, Reducing, Spectacle, Slip On Boss, Plate, Plate Blank, Screwed Boss etc. Apart from the standard array we can also customize spectacle flanges as per the specifications provided by our clients. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Orifice Flanges
Orifice Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We design, manufacture and offer Orifice Flanges that are widely preferred for usage in conjunction with orifice meters to measure the flow of liquids and gases. These are similar to that of standard welding neck and slip-on flanges. However, these flanges also have provision for radial, tapped holes for meter connection as well as additional bolts that can act as jack screws. Additional bolts can be used to separate flanges for inspection or replacement of the orifice plate. We also offer these at market leading prices and within predetermined time period. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


DIN Standard Flanges
DIN Standard Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Steel Tubes have with us a range of DIN flanges that includes welding neck flange, slip on flange, threaded flange, socket welding flange, blind flange and others. Our range of DIN Flanges is sourced from the trustworthy vendors of the industry to ensure superior quality to the clients. Further, our range of din flanges is quality tested at our end before passing it the clients. We offer DIN Flanges in ASTM 2062 grade.
Products: DIN Flange, Weld Neck DIN Flanges, Stainless Steel Weld Neck DIN Flanges, Heavy Welded Neck DIN Flanges. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


RTJ Flanges
RTJ Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Our range of Carbon Steel, Alloy Steel & Stainless steel ring type joint flanges is highly appreciated for strength, durability, reliability, corrosion resistance and close tolerances. These steel ring joint flanges conform to various Indian and international quality standards. Used in a number of industries, these steel ring joint flanges are supplied in various dimensional specifications.

read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Pipe Flange Spacer Ring
Spacer Ring

Manufacturer | Exporter | Suppliers | Stockist  

Spacer Ring is a type of Flanges. We offer a wide range of Carbon Steel, Alloy Steel & Stainless steel spectacle flanges, which are highly durable and reliable. These spectacle blind flanges are made from high quality Carbon Steel, Alloy Steel & Stainless steel. Offered in different dimensions & sizes, these steel spectacle flanges are supplied to highly critical industrial applications. Manufactured to precision, these Carbon Steel, Alloy Steel & Stainless steel spectacle flanges can also be supplied in customized specifications. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Raised Face Flanges
Raised Face Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Manufactured with supreme grade materials, our wide range of raised face flanges are high in demands at overseas market. Our sturdy and highly reliable raised face weld neck flanges are especially designed using latest technology, to meet the demands of diverse industries. Reputed in the market for accuracy, we expertise in manufacturing tailor made industrial raised face flanges, raised flanges as per the specifications of the customers so that they get exactly what they have specified. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Spade Flanges
Spade Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Spades and Spacers are designed to isolate sections of pipe to prevent contamination and allow inspection. Spades and Spacers are made from Carbon Steel, Alloy Steel & Stainless steel to ensure they are strong and corrosion resistant. Spades and Spacers are available dimensionally in accordance with API 590 and ASTM 16.48 or to customer requirements. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Flat Face Flanges
Flat Face Flanges

Manufacturer | Exporter | Suppliers | Stockist  

The flat face flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting.
Flat face flanges are never to be bolted to a raised face flange. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon steel flange must be removed, and that a full face gasket is required. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Groove Flanges
Groove Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We are offering raised face, flat face, lapped joint face, large male-female, small male & female, large tongue & groove, small tongue & groove, ring joint & etc. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Steel pipe flanges
Steel pipe flanges

Manufacturer | Exporter | Suppliers | Stockist  

We offering a high quality range of stainless steel pipe flanges, stainless steel plate flanges, carbon steel flanges, alloy steel flanges and more. These are widely used for mechanical purposes. Our vendors make use of high grade steel in the fabrication of these flanges. These all products are in highly in demand in international and domestic markets. To know more about these products in details feel free to contact Steel Tubes. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Forged flanges
Forged flanges

Manufacturer | Exporter | Suppliers | Stockist  

Steel Tubes are involved in manufacturing and supplying forged steel flanges and forged flanges of different grades and standard ranges that comply with national & international standards. We can also offer forged steel flanges as per the customer's requirement.

read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Flanges and fittings
Flanges and fittings

Manufacturer | Exporter | Suppliers | Stockist  

Steel Tubes has been serving the industrial and ASME fabricator market, domestically and globally. Our highly knowledgeable and experienced technical sales team works together to make sure you get the right product, the first time, and fast. Steel Tubes specializes in custom Products and is also a leading provider of ASME Code Industrial flanges, Weld Fittings, Long Weld Necks, Forged Steel Fittings, Pipe, Gaskets, Nipples, and Stud Bolts & Nuts in all grades of material. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


AISI 316-316L Stainless Steel Flanges
316-316L Stainless Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Prominent & Leading Supplier and Manufacturer from Mumbai, we offer AISI 316-316L Stainless Steel Flanges such as Stainless Steel 316L Slip On Flanges, Stainless Steel 316L Weld Neck Flanges, Stainless Steel 316L Socket Weld Flanges, Stainless Steel 316L Reducing Flanges, Stainless Steel 316L Lap Joint Flanges, Stainless Steel 316L Screwed Flanges and many more items. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


AISI 304-304L Stainless Steel Flanges
316-316L Stainless Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Our clients can ask for quotation from STEEL TUBES Stainless Steel 304L Slip On Flanges that are solid and circular in shape and are in huge demand across the domestic markets. These are slipped over the end of a pipe and are welded thus find wide applications in various industries. Our range of Stainless Steel 304L Slip On Flanges are fabricated using advanced technology that is procured from the reliable vendors of the industries. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


AISI 310-310S Stainless Steel Flanges
AISI 310-310S Stainless Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Prominent & Leading Supplier and Manufacturer from Mumbai, we offer AISI 310-310S Stainless Steel Flanges such as Stainless Steel 310 Slip On Flanges, Stainless Steel 310 Weld Neck Flanges, Stainless Steel 310 Socket Weld Flanges, Stainless Steel 310 Reducing Flanges, Stainless Steel 310 Lap Joint Flanges, Stainless Steel 310 Screwed Flanges and many more items. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


AISI 904-904L Stainless Steel Flanges
AISI 904-904L Stainless Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We are one of the leading manufacturers & exporters of 904L threaded flanges, threaded pipe flanges and stainless steel threaded flanges. These special type of flange is generally used for high pressure, yet smaller diameter applications. Their key feature is that these flanges can be assembled without welding. Threaded Flanges can be used in extremely high pressure services, thus proving impeccable working capacities. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel Flanges
Inconel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Inconel Flanges offered by us are widely demanded by the clients. In order to meet the diverse requirements of our valued clients, STEEL TUBES provide inconel flanges in various dimensions, grades and thickness in in ANSI, DIN, JIS, BS and ASME standards. We ensure to develop these Inconel Flanges at par with the set industrial norms. Non- corrosiveness and durability are the striking features of our range. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel 600 Flanges
Inconel 600 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We Steel Tubes hold the expertise in manufacturing top industrial grade Inconel 600 Slip On Flange. These products are made of the top-notch high Inconel. Unlike the other flanges, they can be easily slipped on between pipes for easy and safe fitting this provides a permanent seal to the pipe ends. Having a vast usage in power generating stations and processing plants, it has an essential role maintaining the pipe pressures. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel 625 Flanges
Inconel 625 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We at Steel Tubes are way forward in manufacturing and exporting Inconel 625 Flanges across the world. We use superior quality stainless steel acquired from distinguished vendors the essential features are well assemble, intermingle structure, easy to install and handle. ANSI, DIN, JIS, BS and ASME are the type of standards that we provide. These flanges get its dimensions according to client’s specifications and corrosion resistance which carcass the pipeline. Moreover, it reduces instability and significant erosion. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel 718 Flanges
Inconel 718 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Ferrule type fittings are precisely machined from Inconel 718 Flanges. All types of Inconel flanges are available for high end industrial plumbing requirements. Conforming different quality standards, the Inconel 718 Flanges are engineered in various profiles. Due to precision designing and machining along the use of best quality raw materials, these Inconel 718 Flanges encompass properties like nonmagnetic, high strength & toughness, heat resistance, chemical resistance, excellent fatigue strength and stress-corrosion cracking resistance. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel 800 Flanges
Inconel 800 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Our clients can avail from us quality range of industrial Inconel 800 Socket Weld Flanges that is widely used to meet the industrial application. Designed in compliance with international standards, these are acknowledged for corrosion resistance, excellent tolerance, easy installation and durability. Available in various sizes and dimensions, we can custom make our range as per the different application usages and client’s requirements. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Inconel 825 Flange supplier
Inconel 825 Flange supplier

Manufacturer | Exporter | Suppliers | Stockist  

Our organization is engaged in manufacturing of a wide range of Inconel 825 Blind flanges that is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. These Inconel 825 flanges are available in various sizes and material and are used to provide positive closer on the ends of pipes, valves or equipment nozzles. Our range helps in easy access to a line once it has been sealed. Further, these are machined to accept a nominal sized pipe to which reduction is being made. This reduction can be a threaded reduction or welded reduction. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Duplex steel Flanges
Duplex steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

We manufacture a wide range of high quality Duplex Flanges to our esteemed clients. Manufactured using excellent quality raw material, these flanges are best suited for small diameter applications. Socket weld flanges create a smooth bore with the proper welding and grinding which allows continuous flow of the fluid. They are in great demand because of its salient features such as durability, performance and sturdy construction. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Alloy Flanges/Alloy Steel Flanges
Alloy Flanges/Alloy Steel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Steel Tubes are well known company work as a leading Manufacturer, Exporter, and Supplier of superior quality Alloy Steel Flanges. The Alloy Steel Flanges offered by us are strictly tested by our experts on various parameters, in order to meet the quality standards. Our Alloy Steel Flanges are widely used in various industrial applications. Moreover, these Alloy Steel Flanges are available in different sizes and specifications as per the client’s needs. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Alloy 20 Flanges
Alloy 20 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Steel tubes supply globally alloy 20 products such as alloy 20 flanges, alloy 20 slip on flanges, alloy 20 socket weld flanges, alloy 20 blind flanges, alloy 20 lapped flanges, alloy 20 screwed flanges, alloy 20 weld neck flanges, alloy 20 reducing flanges, alloy 20 spectacle flanges, alloy 20 plate flanges, alloy 20 plate blank flanges and alloy 20 screwed boss flanges. We offer wide range of Alloy 20 UNS N0.8020 Flanges in following forms shapes and size. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Monel Flanges
Monel Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Steel tubes supply globally qualitative range of Monel Flanges which is available in various grades. We offer wide range of Monel Flanges like Monel 400 flange, Monel 500 flanges, socket weld Monel flanges, weld neck Monel flanges, slip on Monel flanges, long weld neck Monel flanges, blind Monel flanges, reducing Monel flanges, lapped Monel flanges, spectacle Monel flanges, screwed Monel flanges and ring joint Monel flanges. These flanges are available in different sizes. As per the international standards, we offer the gamut which is in high in demands in domestic and international markets. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Monel 400 Flanges
Monel 400 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined. Our products are made employing high quality raw materials making our products reliable and durable. Monel Flanges, Monel 400 Flanges, Monel Fasteners and Monel 400 Fasteners are our diverse range of monel products. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500


Monel K500 Flanges
Monel K500 Flanges

Manufacturer | Exporter | Suppliers | Stockist  

Monel K500 ® UNS N05500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of hardness and greater strength. These amplified properties, strength and hardness, are obtained by adding titanium and aluminum to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. read more


Flange Flanges class: 150, 300, 400, 600, 900, 1500, 2500

Contact now!

Call Now
61432000 (30 Lines)
Call Now

 



Flanges

ASME / ANSI B16.5 / ASME B16.47 Flange

 


Products

Steel Metal Materials

ISO 9001:2008 Certified

Why us?

  • ISO 9001:2008 Certified Company
  • Available Inventory
  • On-Time Delivery Every Time
  • Competitive Prices
  • Quality Product
  • Rapid Response

Do you know?

Winner of All India Award for Export, this is the 5th consecutive year that Steel Tubes has been receiving this award

Shipping worldwide

Home | Directory | Blog | Featured Products | Price Chart | Steel- Manufacturing Process | Videos on You Tube | Enquiry Form | Contact | Sitemap | Conversion

Bosset®, Brazolet®, Buttolet®, Coupolet®, Eco-Seal®, Elbolet®, Flangolet®, Flexolet®, Latrolet®, Nipolet®, Nozzelet®, Olet®, Pipets®, Quikleg 90®, Screwdolet®, Sockolet®, Studdet®, Sweepolet®, Thermalet®, Therm-L-Bow®, Thredolet®, Valvolet®, Vesselet®, Weldolet® are registered Trade Marks of Bonney Forge Corporation; MONEL®,  INCOLOY® and INCONEL® are registered Trade Marks of Special Metals Corporation

© Steel Tubes India 1994-2016. All Rights Reserved.