Ring Type Joint Flange (RTJ) manufacturer exporter

Flange - Ring Type Joint Flange (RTJ), extensive range of Ring Type Joint Flange (RTJ) with Steel Tubes

Steel Tubes India manufacturer & fabricator of Ring Type Joint Flange (RTJ), Thread Fittings, Threaded Pipe Flanges, premier supplier of bulk Ring Type Joint Flange (RTJ) stock worldwide

Fast delivery guaranteed for every size and class SS Ring Type Joint Flange (RTJ), Socket Weld Flanges & Blind Flanges, largest range of Ring Type Joint Flange (RTJ) Supplies in India,

Home / Products / Manufacturer / Flanges / Ring Type Joint Flange (RTJ)

Steel tubes is a worldwide industrial distributor for Ring Type Joint Flange (RTJ) and Steel Forged Flanges. We supply all kind of Ring Type Joint Flange (RTJ) & steel material for your projects within timeline to anywhere in the world, contact us now for request a quote. We always try our best to help our customers with the best products and service on the market.

RING TYPE JOINT (RTJ) FLANGE

stainlesssteel-RTJFlanges

RTJ flanges have grooves cut into their faces which accept steel Ring Gaskets. RTJ flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or "Coining") the gasket to make Intimate Contact inside the grooves, creating a metal to metal seal.

An RTJ flange may have a raised face with a ring groove machined into it. This raised face does not serve as any part of the sealing means. For RTJ flanges that seal with BX ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the compressed gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension.

Ring Type Joint Flange (RTJ) Information

Ring Type Joint Flange (RTJ) Manufacturer

Manufacturer | Exporter | Suppliers | Stockist  

Ring Type Joint Flange (RTJ) Key Features:

  • Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
  • Ideal for higher pressure and temperature applications for small pipe sizes
  • Not recommended for larger loads, especially when subjected to higher torque

NOTE: This flange is referred to as either threaded or screwed. It is used to connect other threaded components in low pressure, non-critical applications. No welding is required.

Standards: ANSI, AS2129, JIS, DIN, EN-1092-1, BS10, BS4504 etc

Nominal Pressure: PN0.25-PN42, 150LB-900LB, 5K--30K.

Nominal Diameter: DN10A-DN600A, NPS:3/8"-24".

Ring Type Joint Flange (RTJ) Materials: Carbon steel, stainless steel and alloy steel.

Printing: Carbon steel and alloy steel with yellow print, black print, oil or zinc.

Ring Type Joint Flange (RTJ) Packing: Plywooden case.

Payment terms: both L/C at sight and T/T before shipment.

* We can also manufacture special application flanges and forgings that customers require.

Ring Type Joint Flange (RTJ) Dimensions

Ring Type Joint Flange (RTJ) ANSI B16.5
Ring Type Joint Flange (RTJ) Class 150 lbs
Ring Type Joint Flange (RTJ) Class 300 lbs
Ring Type Joint Flange (RTJ) Class 400 lbs
Ring Type Joint Flange (RTJ) Class 600 lbs
Ring Type Joint Flange (RTJ) Class 900 lbs
Ring Type Joint Flange (RTJ) Class 1500 lbs
Ring Type Joint Flange (RTJ) Class 2500 lbs


Grades available with Steel Tubes

Ring Type Joint Flange (RTJ) Manufacturer India

Ring Type Joint Flange (RTJ) Manufacturer | Exporter | Suppliers | Stockist  

Stainless Steel:

ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H. 

Duplex Steel:

ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61. 

Nickel Alloy

ASTM / ASME SB 564 UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy

ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200.

Carbon Steel

ASTM / ASME A 105
ASTM / ASME A 350 LF 2

Alloy Steel

ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91

Materials used:

Ring Type Joint Flange (RTJ) Manufacturer India

Manufacturer | Exporter | Suppliers | Stockist  


Alloy steel
Carbon steel
Stainless steel
Cast iron
Rubber
PVC
Thermoplastics
Aluminum
Brass
Bronze etc.



Standard

Ring Type Joint Flange (RTJ) supplier India

Manufacturer | Exporter | Suppliers | Stockist  

ANSI :ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S : BS4504 , BS4504, BS1560, BS10


Where Steel Tubes India export?

Iran, Iraq, Italy, UAE, Bahrain, Indonesia, Australia, Kuwait, Saudi Arabia, South Africa, Germany, UK, Denmark, Canada, USA, Peru, Brazil, Nizeria, Mexico, Venezuela (Latin America), South America

Find more Flange Products

Steel Flanges
Steel Forged Flanges
ASTM A182 Stainless Steel Flanges Grade 304/L/H, 310,316L, 316Ti, 316H ,317H, 321, 410, 317L, 347, 904L
ASTM A105 Carbon Steel Flanges
Slip on flanges (SORF/SOFF)
Weld Neck Flanges (WNRF)
Long Weld Neck Flanges
Blind Flanges (BLRF)
Threaded Flanges (THRF)
Plate Flanges
Lap Joint Flanges
Square Flange
Socket Weld Flanges
Spectacle Blind Flanges
Oriface Flanges
DIN Standard Flanges
RTJ Flanges
Spacer Ring
Raised Face Flanges
Spade Flanges
Flat Face Flanges
Groove Flanges

Stainless steel flanges (SS flanges)
Steel pipe flanges
Blind flanges
Din standard flanges
Lap joint flanges
Long weld neck flanges
Plate flanges
Orifice flanges
Slip on flanges
Socket weld flanges
Spectacle flanges
Threaded flange
Forged flanges
Weld neck flanges
Flanges and fittings
AISI 316-316L Stainless Steel Flanges
Stainless Steel 316L Slip On Flanges
Stainless Steel 316L Weld Neck Flanges
Stainless Steel 316L Socket Weld Flanges
Stainless Steel 316L Reducing Flanges
Stainless Steel 316L Lap Joint Flanges
Stainless Steel 316L Screwed Flanges
Stainless Steel 316L Long Weld Neck Flanges
Stainless Steel 316L Spectacle Flanges

AISI 304-304L Stainless Steel Flanges
Stainless Steel 304L Slip On Flanges
Stainless Steel 304L Weld Neck Flanges
Stainless Steel 304L Reducing Flanges
Stainless Steel 304L Lap Joint Flanges
Stainless Steel 304L Screwed Flanges
Stainless Steel 304L Long Weld Neck Flanges
Stainless Steel 304L Spectacle Flanges

AISI 316Ti Stainless Steel Flanges
Stainless Steel 316Ti Slip On Flanges
Stainless Steel 316Ti Weld Neck Flanges
Stainless Steel 316Ti Reducing Flanges
Stainless Steel 316Ti Lap Joint Flanges
Stainless Steel 316Ti Screwed Flanges
Stainless Steel 316Ti Long Weld Neck Flanges
Stainless Steel 316Ti Spectacle Flanges

AISI 310-310S Stainless Steel Flanges
Stainless Steel 310 Slip On Flanges
Stainless Steel 310 Weld Neck Flanges
Stainless Steel 310 Socket Weld Flanges
Stainless Steel 310 Reducing Flanges
Stainless Steel 310 Lap Joint Flanges
Stainless Steel 310 Screwed Flanges
Stainless Steel 310 Long Weld Neck Flanges

AISI 904-904L Stainless Steel Flanges
Stainless Steel 904 Slip On Flanges
Stainless Steel 904 Weld Neck Flanges
Stainless Steel 904 Socket Weld Flanges
Stainless Steel 904 Reducing Flanges
Stainless Steel 904 Lap Joint Flanges
Stainless Steel 904 Screwed Flanges
Stainless Steel 904 Long Weld Neck Flanges

Inconel Flanges
Inconel Blind Flanges
Inconel Slip On Flanges
Inconel Weld Neck Flanges
Inconel Socket Weld Flanges
Inconel Reducing Flanges
Inconel Lap Joint Flanges
Inconel Screwed Flanges
Inconel 600 Flanges
Inconel 600 Flange
Inconel 600 Blind Flanges
Inconel 600 Slip On Flanges
Inconel 600 Weld Neck Flanges
Inconel 600 Socket Weld Flanges
Inconel 600 Reducing Flanges
Inconel 600 Lap Joint Flanges
Inconel 600 Screwed Flanges
Inconel 625 Flanges
Inconel 625 Flange manufacturer
Inconel 625 Blind Flanges
Inconel 625 Slip On Flanges
Inconel 625 Weld Neck Flanges
Inconel 625 Socket Weld Flanges
Inconel 625 Reducing Flanges
Inconel 625 Lap Joint Flanges
Inconel 625 Screwed Flanges
Inconel 718 Flanges
718 Blind Flanges
718 Slip On Flanges
718 Weld Neck Flanges
718 Socket Weld Flanges
718 Reducing Flanges
718 Lap Joint Flanges
718 Screwed Flanges
Inconel 800 Flanges
Inconel 800 Flange
Inconel 800 Blind Flanges
Inconel 800 Slip On Flange
Inconel 800 Weld Neck Flanges
Inconel 800 Socket Weld Flanges
Inconel 800 Reducing Flanges
Inconel 800 Screwed Flanges
Inconel 825 Flange supplier
Inconel 825 Flange
Inconel 825 Blind Flanges
Inconel 825 Slip On Flanges
Inconel 825 Weld Neck Flanges
Inconel 825 Socket Weld Flanges
Inconel 825 Reducing Flanges
Inconel 825 Lap Joint Flanges
Inconel 825 Screwed Flanges

Duplex steel Flanges
Duplex steel Blind Flanges
Duplex steel Slip On Flanges
Duplex steel Weld Neck Flanges
Duplex steel Socket Weld Flanges
Duplex steel Reducing Flanges
Duplex steel Lap Joint Flanges
Duplex steel Screwed Flanges

Duplex steel 600 Flange
Duplex steel 600 Blind Flange
Duplex steel 600 Slip On Flange
Duplex steel 600 Weld Neck Flange
Duplex steel 600 Socket Weld Flange
Duplex steel 600 Reducing Flange
Duplex steel 600 Lap Joint Flange
Duplex steel 600 Screwed Flange

Duplex steel 625 Flange
Duplex steel 625 Blind Flange
Duplex steel 625 Slip On Flange
Duplex steel 625 Weld Neck Flange
Duplex steel 625 Socket Weld Flange
Duplex steel 625 Reducing Flange
Duplex steel 625 Lap Joint Flange
Duplex steel 625 Screwed Flange

Duplex steel 718 Flange
Duplex steel 718 Blind Flange
Duplex steel 718 Slip On Flange
Duplex steel 718 Weld Neck Flange
Duplex steel 718 Socket Weld Flange
Duplex steel 718 Reducing Flange
Duplex steel 718 Lap Joint Flange
Duplex steel 718 Screwed Flange

Duplex steel 800 Flange
Duplex steel 800 Blind Flange
Duplex steel 800 Slip On Flange
Duplex steel 800 Weld Neck Flange
Duplex steel 800 Socket Weld Flange
Duplex steel 800 Reducing Flange
Duplex steel 800 Screwed Flange

Duplex steel 825 Flange
Duplex steel 825 Blind Flange
Duplex steel 825 Slip On Flange
Duplex steel 825 Weld Neck Flange
Duplex steel 825 Socket Weld Flange
Duplex steel 825 Reducing Flange
Duplex steel 825 Lap Joint Flange
Duplex steel 825 Screwed Flange

Alloy Flanges/Alloy Steel Flange

Alloy 20 Flange
Alloy 20 Flange Manufacturer
Alloy 20 Blind Flange
Alloy 20 Slip On Flange
Alloy 20 Weld Neck Flange
Alloy 20 Socket Weld Flange
Alloy 20 Reducing Flange
Alloy 20 Lap Joint Flange
Alloy 20 Screwed Flange

Monel Flange
Monel Blind Flange
Monel Slip On Flange
Monel Weld Neck Flange
Monel Socket Weld Flange
Monel Reducing Flange
Monel Lap Joint Flange
Monel Screwed Flange

Monel 400 Flange
Monel 400 Flange
Monel 400 Blind Flange
Monel 400 Slip On Flange
Monel 400 Weld Neck Flange
Monel 400 Socket Weld Flange
Monel 400 Reducing Flange
Monel 400 Lap Joint Flange
Monel 400 Screwed Flange

Monel K500 Flanges
Monel K500 Blind Flanges
Monel K500 Slip On Flanges
Monel K500 Weld Neck Flanges
Monel K500 Socket Weld Flanges
Monel K500 Reducing Flanges
Monel K500 Lap Joint Flanges
Monel K500 Screwed Flanges

 


Contact now!

Call Now
61432000 (30 Lines)
Call Now

 

 


Products

Steel Metal Materials

ISO 9001:2008 Certified

Why us?

  • ISO 9001:2008 Certified Company
  • Available Inventory
  • On-Time Delivery Every Time
  • Competitive Prices
  • Quality Product
  • Rapid Response

Do you know?

Winner of All India Award for Export, this is the 5th consecutive year that Steel Tubes has been receiving this award

Shipping worldwide

Home | Directory | Blog | Featured Products | Price Chart | Steel- Manufacturing Process | Videos on You Tube | Enquiry Form | Contact | Sitemap | Conversion

© Steel Tubes India 1994-2013. All Rights Reserved.