Alloy 20 Pipe

ASTM B729 UNS N08020 Seamless Pipe & Carpenter 20 Tubing supplier in Mumbai, India

Pipes available in the market are made up of various materials such as alloys and metals. One such pipe is the Alloy 20 Pipe that is made up of an austenitic steel material Alloy 20 Pipe manufacturers stabilize these pipes by adding niobium to the alloy. This helps in resisting intergranular corrosion. It offers good resistance to phosphoric acid, sulfuric acid, nitric acid, and aqueous salt solution. Alloy 20 Pipes are the best solution for applications wherein chloride stress corrosion cracking is an issue. However one needs to be cautious with Alloy 20 Seamless Pipe in chloride ion containing environment as it increases the corrosion rate rapidly.

Alloy 20 Seamless Pipe

Alloy 20 Welded Pipe can be formed either by hot or cold working. Hot forging material needs to be heated within the temperature range of 2100 degrees F to 2250 degrees F. Post which the Alloy 20 Pipe needs to be quenched with water. A negative effect on the stabilization of the Incoloy Alloy 20 Pipe can be obtained by heating it at a temperature below 2100 degrees F. It is also important to relieve the stress of the said pipe so that it can perform easily. Carpenter 20 Pipeis widely used in chemical processing and petrochemical refining, food processing, and pharmaceutical industries. 

Carpenter Alloy 20cb3 Pipe can be used in applications where the temperature is limited to 1000 degrees F.  Moreover, UNS N08020 Pipe is also used in storage tanks, mixing tanks, pumps and valves, agitators, fasteners, and fittings. Alloy 20 Pipe suppliers are able to supply these pipes at a lower cost in India due to the low cost of labor and raw material. They are used in plastic as well as power generation industries. B729 Pipe produced by us is passed through various tests that enable us to ensure the properties inherited by them.

Incoloy Alloy 20 Pipes supplier accordance to ASTM B729/ B468/ B464/ B829/ B474/ B751/ / B775 American, British and European standards


Alloy 20 Welded Pipe Specification

Stockist of Alloy 20 Seamless Pipe and UNS N08020 Tubing available in Round & Square shapes

Product Name: ASTM B729 UNS N08020 Alloy 20 Seamless Pipe

Finish: Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF

Straight lengths: Maximum 65 ft (20 m)

Forms: Straight or ‘U’ bent Tubes

Surface Finish:
16 micro inch Ra (ID 0.4 micron Ra) (as drawn)
4 micro inch Ra (ID 0.1 micron Ra) (electropolished)

We can also cut, thread, and groove ASTM B729 UNS N08020 Alloy 20 Seamless Pipe to meet your specifications.

ASTM B729 UNS N08020 Alloy 20 Seamless Pipe suppliers

ASTM B468 UNS N08020 Alloy 20 Welded Tube suppliers
ASTM B468 UNS N08020 Alloy 20 Welded Tube

Types of Incoloy Alloy 20 Pipe

Alloy 20 Pipe
ASTM B729 UNS N08020 Alloy 20 Tube suppliersIncoloy Alloy 20 Tubing, ASTM B729 UNS N08020 Tubing, B729 UNS N08020 Tubing suppliers in India

Available ASTM B729 UNS N08020 Alloy 20 Tubing product forms

  • ASTM B729 UNS N08020 Alloy 20 Straight Tubing
  • ASTM B729 UNS N08020 Alloy 20 Seamless Tubing

Typical manufacturing specifications

  • ASTM B163
  • ASTM B167
  • AMS 5580
  • BS 3074
  • Also individual customer specifications.

We have the flexibility to produce precision thick wall or thin wall B729 UNS N08020 Alloy 20 tubes & pipe in seamless, welded and redrawn forms.

Standard: ASTM / ASME SB 163 / 167 / 517 / 704 / 705 GB/ISO/EN/ASTM/JIS, etc

B729 UNS N08020 Alloy 20 Pipe Type: Seamless / ERW / Welded / Fabricated / LSAW Pipes / Seam-welded / Redrawn

 


ASTM B729 UNS N08020 Pipe
Incoloy Alloy 20 Tube, ASTM B729 UNS N08020 Tube, B729 UNS N08020 Tube suppliers in India

Trade Name & size:

  • ASTM B729 UNS N08020 Alloy 20 Tube suppliersIncoloy Alloy 20 Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Tube Manufacturer
  • ASTM B729 UNS N08020 Tube distributor in UAE
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 nickel Tube
  • Alloy 20 Tube
  • Alloy 20 Tube
  • Ni-Cr-Mo alloy Tube
  • Nickel - Chromium alloy Tube
  • ASTM B729 UNS N08020 Alloy 20 Tube Size: 6.35 mm OD To 152 mm OD

Condition: Hard (Y) / Soft (M)

Dimension: OD*Thk*L (10-219)*(0.5-10)*(1000-15000) mm

Thickness Range: 0.5 mm-60 mm


Incoloy Alloy 20 Pipe
Incoloy Alloy 20 Pipe, ASTM B729 UNS N08020 Pipe, B729 UNS N08020 Pipe suppliers in India

Steel Tubes India is the only company in India who awarded by Indian Government for Export Excellence for 6 consecutive Years.

ASTM B729 UNS N08020 Alloy 20 Pipe Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Pipe suppliersIncoloy Alloy 20 Pipe suppliers
  • ASTM B729 UNS N08020 Alloy 20 Pipe Manufacturer
  • ASTM B729 UNS N08020 Pipe distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Pipe
  • Alloy 20 Pipe
  • Special Steel Incoloy Alloy 20 Tube
  • Ni-Cr-Mo alloy Pipe
  • Nickel - Chromium alloy Pipe
  • ASTM B729 UNS N08020 Alloy 20 Pipe Size: 6.35 mm OD To 152 mm OD

Origin Standard: American Standard, Russia Standard, Janpanese Standard, European Standard

SHORTEST Possible Delivery: Shutdown / Emergency/ Project Rush Demands

Certification: ISO EN 10204 3.1/ 3.1B/ 3.2, PED, DNV, TUV.

End: Plain End, Beveled End, Threaded

Manufacturers:

  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Kobe Special Tube, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea

Alloy 20cb3 Seamless pipe
Incoloy Alloy 20 Seamless pipe, ASTM B729 UNS N08020 Seamless pipe, B729 UNS N08020 Seamless pipe suppliers in India

Steel Tubes India is first company in India who awarded by Indian Government for Export Excellence for 6 consecutive Years.

ASTM B729 UNS N08020 Alloy 20 Seamless pipe Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Seamless pipe suppliersIncoloy Alloy 20 Seamless pipe suppliers
  • ASTM B729 UNS N08020 Alloy 20 Seamless pipe Manufacturer
  • ASTM B729 UNS N08020 Seamless pipe distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Seamless pipe
  • Alloy 20 Seamless pipe
  • Ni-Cr-Mo alloy Seamless pipe
  • Nickel - Chromium alloy Seamless pipe
  • ASTM B729 UNS N08020 Alloy 20 Seamless pipe Size: 6.35 mm OD To 152 mm OD

Clients reference list: ISC (Japan), ISC (Iran), BHEL (India), Media air-conditioning, SUMSUNG (Korea), GNG Co., Ltd. (Korea), and ZAN (Japan). GE (USA) etc.

Technical requirements * according to:

ASTM B161/ ASME SB161
ASTM B165/ ASME SB165
ASTM B163/ ASME SB163
ASTM B167/ ASME SB167
ASTM B444, AMS 5581
ASTM B622, ASTM B729,
ASTM B677, ASTM B722


ASME SB729 Alloy 20 Seamless Pipe
Incoloy Alloy 20 Seamless tube, ASTM B729 UNS N08020 Seamless tube, B729 UNS N08020 Seamless tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Seamless tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Seamless tube suppliersIncoloy Alloy 20 Seamless tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Seamless tube Manufacturer
  • ASTM B729 UNS N08020 Seamless tube distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Seamless tube
  • Alloy 20 Seamless tube
  • Ni-Cr-Mo alloy Seamless tube
  • Nickel - Chromium alloy Seamless tube
  • ASTM B729 UNS N08020 Alloy 20 Seamless tube Size: 6.35 mm OD To 152 mm OD

Inspection and testing terms: Ultrasonic testing, electric non-destructive testing, flaring testing, hydrostatic testing, flattening testing, visual surface inspection, dimensional inspection, tensile properties inspection and chemical elements analysis, Bend test,Hydrostatic, Eddy Current, Heat Treatment, Hardness, Flaring test, I.C.test

Marking: All Alloy 20 tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)


Alloy WERKSTOFF NR. 2.4660 Welded pipe
Incoloy Alloy 20 Welded pipe, ASTM B729 UNS N08020 Welded pipe, B729 UNS N08020 Welded pipe suppliers in India

ASTM B729 UNS N08020 Alloy 20 Welded pipe Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Welded pipe suppliersIncoloy Alloy 20 Welded pipe suppliers
  • ASTM B729 UNS N08020 Alloy 20 Welded pipe Manufacturer
  • ASTM B729 UNS N08020 Welded pipe distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Welded pipe
  • Alloy 20 Welded pipe
  • Ni-Cr-Mo alloy Welded pipe
  • Nickel - Chromium alloy Welded pipe
  • ASTM B729 UNS N08020 Alloy 20 Welded pipe Size: 6.35 mm OD To 152 mm OD

Carpenter 20 Welded Pipe
Incoloy Alloy 20 Welded tube, ASTM B729 UNS N08020 Welded tube, B729 UNS N08020 Welded tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Welded tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Welded tube suppliersIncoloy Alloy 20 Welded tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Welded tube Manufacturer
  • ASTM B729 UNS N08020 Welded tube distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Welded tube
  • Alloy 20 Welded tube
  • Ni-Cr-Mo alloy Welded tube
  • Nickel - Chromium alloy Welded tube
  • ASTM B729 UNS N08020 Alloy 20 Welded tube Size: 6.35 mm OD To 152 mm OD

Alloy Material:

Nickel : Nickel 200,201
Ni-cu alloy : alloy 400
Ni-Cr-Fe alloy: alloy 600, 690, 020,028
Ni-Cr-Mo alloy: alloy 625, C-4, C-22, C-2000, G-30, G-35
Ni-Fe-Cr alloy: alloy 800, 800H, 800HT, 825
Ni-Mo alloy: alloy B-2, B-3
Ni-Mo-Cr alloy: alloy C-276


Alloy DIN NR. 2.4660 Protection Pipe
Incoloy Alloy 20 Protection tube, ASTM B729 UNS N08020 Protection tube, B729 UNS N08020 Protection tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Protection tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Protection tube suppliersIncoloy Alloy 20 Protection tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Protection tube Manufacturer
  • ASTM B729 UNS N08020 Protection tube distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Protection tube
  • Alloy 20 Protection tube
  • Ni-Cr-Mo alloy Protection tube
  • Nickel - Chromium alloy Protection tube
  • ASTM B729 UNS N08020 Alloy 20 Protection tube Size: 6.35 mm OD To 152 mm OD

UNS N08020 Cold Drawn Seamless pipe
Incoloy Alloy 20 Cold Drawn Seamless pipe, ASTM B729 UNS N08020 Cold Drawn Seamless pipe, B729 UNS N08020 Cold Drawn Seamless pipe suppliers in India

ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless pipe Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless pipe suppliersIncoloy Alloy 20 Cold Drawn Seamless pipe suppliers
  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless pipe Manufacturer
  • ASTM B729 UNS N08020 Cold Drawn Seamless pipe distributor in Singapore
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Cold Drawn Seamless pipe
  • Alloy 20 Cold Drawn Seamless pipe
  • Ni-Cr-Mo alloy Cold Drawn Seamless pipe
  • Nickel - Chromium alloy Cold Drawn Seamless pipe
  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless pipe Size: 6.35 mm OD To 152 mm OD

ASTM B729 20 Alloy Cold Drawn Seamless Pipe
Incoloy Alloy 20 Cold Drawn Seamless tube, ASTM B729 UNS N08020 Cold Drawn Seamless tube, B729 UNS N08020 Cold Drawn Seamless tube suppliers in India, Offer Great Price, Get Free Quote Now.

ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless tube suppliersIncoloy Alloy 20 Cold Drawn Seamless tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless tube Manufacturer
  • ASTM B729 UNS N08020 Cold Drawn Seamless tube distributor in Turkey
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Cold Drawn Seamless tube
  • Alloy 20 Cold Drawn Seamless tube
  • Ni-Cr-Mo alloy Cold Drawn Seamless tube
  • Nickel - Chromium alloy Cold Drawn Seamless tube
  • ASTM B729 UNS N08020 Alloy 20 Cold Drawn Seamless tube Size: 6.35 mm OD To 152 mm OD

ASME SB729 Alloy 20 Extruded Seamless Pipe
Incoloy Alloy 20 Extruded Seamless Pipe, ASTM B729 UNS N08020 Extruded Seamless Pipe, B729 UNS N08020 Extruded Seamless Pipe suppliers in India, Check our price before you buy

ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Pipe Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Pipe suppliersIncoloy Alloy 20 Extruded Seamless Pipe suppliers
  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Pipe Manufacturer
  • ASTM B729 UNS N08020 Extruded Seamless Pipe distributor in Turkey
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Extruded Seamless Pipe
  • Alloy 20 Extruded Seamless Pipe
  • Ni-Cr-Mo alloy Extruded Seamless Pipe
  • Nickel - Chromium alloy Extruded Seamless Pipe
  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Pipe Size: 6.35 mm OD To 152 mm OD

Alloy 20 Extruded Seamless Pipe
Incoloy Alloy 20 Extruded Seamless Tube, ASTM B729 UNS N08020 Extruded Seamless Tube, B729 UNS N08020 Extruded Seamless Tube suppliers in India, Get Free Tips & Tricks to buy original materials.

ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Tube suppliersIncoloy Alloy 20 Extruded Seamless Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Tube Manufacturer
  • ASTM B729 UNS N08020 Extruded Seamless Tube distributor in Turkey
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Extruded Seamless Tube
  • Alloy 20 Extruded Seamless Tube
  • Ni-Cr-Mo alloy Extruded Seamless Tube
  • Nickel - Chromium alloy Extruded Seamless Tube
  • ASTM B729 UNS N08020 Alloy 20 Extruded Seamless Tube Size: 6.35 mm OD To 152 mm OD

ASTM B729 UNS N08020 Round Pipe
Incoloy Alloy 20 Round Tube, ASTM B729 UNS N08020 Round Tube, B729 UNS N08020 Round Tube suppliers in India, Trusted & Best company in India for High Nickel Alloy Products.

ASTM B729 UNS N08020 Alloy 20 Round Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Round Tube suppliersIncoloy Alloy 20 Round Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Round Tube Manufacturer
  • ASTM B729 UNS N08020 Round Tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Round Tube
  • Alloy 20 Round Tube
  • Ni-Cr-Mo alloy Round Tube
  • Nickel - Chromium alloy Round Tube
  • ASTM B729 UNS N08020 Alloy 20 Round Tube Size: 6.35 mm OD To 152 mm OD

Incoloy Alloy 20 Square Pipe
Incoloy Alloy 20 Square Tube, ASTM B729 UNS N08020 Square Tube, B729 UNS N08020 Square Tube suppliers in India, click here to check Why Choose Steel Tubes India?

ASTM B729 UNS N08020 Alloy 20 Square Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Square Tube suppliersIncoloy Alloy 20 Square Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Square Tube Manufacturer
  • ASTM B729 UNS N08020 Square Tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Square Tube
  • Alloy 20 Square Tube
  • Ni-Cr-Mo alloy Square Tube
  • Nickel - Chromium alloy Square Tube
  • ASTM B729 UNS N08020 Alloy 20 Square Tube Size: 6.35 mm OD To 152 mm OD

Alloy 20cb3 Coiled Pipe
Incoloy Alloy 20 Coiled Tubing, ASTM B729 UNS N08020 Coiled Tubing, B729 UNS N08020 Coiled Tubing suppliers in India, Available SALE on below products

ASTM B729 UNS N08020 Alloy 20 Coiled Tubing Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Coiled Tubing suppliersIncoloy Alloy 20 Coiled Tubing suppliers
  • ASTM B729 UNS N08020 Alloy 20 Coiled Tubing Manufacturer
  • ASTM B729 UNS N08020 Coiled Tubing distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Coiled Tubing
  • Alloy 20 Coiled Tubing
  • Ni-Cr-Mo alloy Coiled Tubing
  • Nickel - Chromium alloy Coiled Tubing
  • ASTM B729 UNS N08020 Alloy 20 Coiled Tubing Size: 6.35 mm OD To 152 mm OD

ASME SB729 Alloy 20 Rectangular Pipe
Incoloy Alloy 20 Rectangular Tube, ASTM B729 UNS N08020 Rectangular Tube, B729 UNS N08020 Rectangular Tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Rectangular Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Rectangular Tube suppliersIncoloy Alloy 20 Rectangular Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Rectangular Tube Manufacturer
  • ASTM B729 UNS N08020 Rectangular Tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Rectangular Tube
  • Alloy 20 Rectangular Tube
  • Ni-Cr-Mo alloy Rectangular Tube
  • Nickel - Chromium alloy Rectangular Tube
  • ASTM B729 UNS N08020 Alloy 20 Rectangular Tube Size: 6.35 mm OD To 152 mm OD

Alloy WERKSTOFF NR. 2.4660 Pipe bends
Incoloy Alloy 20 Tubing bends, ASTM B729 UNS N08020 Tubing bends, B729 UNS N08020 Tubing bends suppliers in India

ASTM B729 UNS N08020 Alloy 20 Tubing bends Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Tubing bends suppliersIncoloy Alloy 20 Tubing bends suppliers
  • ASTM B729 UNS N08020 Alloy 20 Tubing bends Manufacturer
  • ASTM B729 UNS N08020 Tubing bends distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Tubing bends
  • Alloy 20 Tubing bends
  • Ni-Cr-Mo alloy Tubing bends
  • Nickel - Chromium alloy Tubing bends
  • ASTM B729 UNS N08020 Alloy 20 Tubing bends Size: 6.35 mm OD To 152 mm OD

Carpenter 20 High temperature alloy Pipe
Incoloy Alloy 20 High temperature alloy tubing, ASTM B729 UNS N08020 High temperature alloy tubing, B729 UNS N08020 High temperature alloy tubing suppliers in India

ASTM B729 UNS N08020 Alloy 20 High temperature alloy tubing Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 High temperature alloy tubing suppliersIncoloy Alloy 20 High temperature alloy tubing suppliers
  • ASTM B729 UNS N08020 Alloy 20 High temperature alloy tubing Manufacturer
  • ASTM B729 UNS N08020 High temperature alloy tubing distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel High temperature alloy tubing
  • Alloy 20 High temperature alloy tubing
  • Ni-Cr-Mo alloy High temperature alloy tubing
  • Nickel - Chromium alloy High temperature alloy tubing
  • ASTM B729 UNS N08020 Alloy 20 High temperature alloy tubing Size: 6.35 mm OD To 152 mm OD

Alloy DIN NR. 2.4660 Pipe
Incoloy Alloy 20 Tubería, ASTM B729 UNS N08020 Tubería, B729 UNS N08020 Tubería suppliers in India

ASTM B729 UNS N08020 Alloy 20 Tubería Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Tubería suppliersIncoloy Alloy 20 Tubería suppliers
  • ASTM B729 UNS N08020 Alloy 20 Tubería Manufacturer
  • ASTM B729 UNS N08020 Tubería distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Tubería
  • Alloy 20 Tubería
  • Ni-Cr-Mo alloy Tubería
  • Nickel - Chromium alloy Tubería
  • ASTM B729 UNS N08020 Alloy 20 Tubería Size: 6.35 mm OD To 152 mm OD

UNS N08020 Pipe
Incoloy Alloy 20 Tubo, ASTM B729 UNS N08020 Tubo, B729 UNS N08020 Tubo suppliers in India

ASTM B729 UNS N08020 Alloy 20 Tubo Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Tubo suppliersIncoloy Alloy 20 Tubo suppliers
  • ASTM B729 UNS N08020 Alloy 20 Tubo Manufacturer
  • ASTM B729 UNS N08020 Tubo distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Tubo
  • Alloy 20 Tubo
  • Ni-Cr-Mo alloy Tubo
  • Nickel - Chromium alloy Tubo
  • ASTM B729 UNS N08020 Alloy 20 Tubo Size: 6.35 mm OD To 152 mm OD

ASTM B729 20 Alloy Precision Pipe
Incoloy Alloy 20 Precision tube, ASTM B729 UNS N08020 Precision tube, B729 UNS N08020 Precision tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Precision tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Precision tube suppliersIncoloy Alloy 20 Precision tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Precision tube Manufacturer
  • ASTM B729 UNS N08020 Precision tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Precision tube
  • Alloy 20 Precision tube
  • Ni-Cr-Mo alloy Precision tube
  • Nickel - Chromium alloy Precision tube
  • ASTM B729 UNS N08020 Alloy 20 Precision tube Size: 6.35 mm OD To 152 mm OD

ASME SB729 Alloy 20 Capillary Pipe
Incoloy Alloy 20 Capillary tube, ASTM B729 UNS N08020 Capillary tube, B729 UNS N08020 Capillary tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Capillary tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Capillary tube suppliersIncoloy Alloy 20 Capillary tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Capillary tube Manufacturer
  • ASTM B729 UNS N08020 Capillary tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Capillary tube
  • Alloy 20 Capillary tube
  • Ni-Cr-Mo alloy Capillary tube
  • Nickel - Chromium alloy Capillary tube
  • ASTM B729 UNS N08020 Alloy 20 Capillary tube Size: 6.35 mm OD To 152 mm OD

Alloy 20 Hot finished seamless Pipe (HFS)
Incoloy Alloy 20 Hot finished seamless tubing (HFS), ASTM B729 UNS N08020 Hot finished seamless tubing (HFS), B729 UNS N08020 Hot finished seamless tubing (HFS) suppliers in India

ASTM B729 UNS N08020 Alloy 20 Hot finished seamless tubing (HFS) Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Hot finished seamless tubing (HFS) suppliersIncoloy Alloy 20 Hot finished seamless tubing (HFS) suppliers
  • ASTM B729 UNS N08020 Alloy 20 Hot finished seamless tubing (HFS) Manufacturer
  • ASTM B729 UNS N08020 Hot finished seamless tubing (HFS) distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Hot finished seamless tubing (HFS)
  • Alloy 20 Hot finished seamless tubing (HFS)
  • Ni-Cr-Mo alloy Hot finished seamless tubing (HFS)
  • Nickel - Chromium alloy Hot finished seamless tubing (HFS)
  • ASTM B729 UNS N08020 Alloy 20 Hot finished seamless tubing (HFS) Size: 6.35 mm OD To 152 mm OD

ASTM B729 UNS N08020 Cold drawn seamless Pipe (CDS)
Incoloy Alloy 20 Cold drawn seamless tubing (CDS), ASTM B729 UNS N08020 Cold drawn seamless tubing (CDS), B729 UNS N08020 Cold drawn seamless tubing (CDS) suppliers in India

ASTM B729 UNS N08020 Alloy 20 Cold drawn seamless tubing (CDS) Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Cold drawn seamless tubing (CDS) suppliersIncoloy Alloy 20 Cold drawn seamless tubing (CDS) suppliers
  • ASTM B729 UNS N08020 Alloy 20 Cold drawn seamless tubing (CDS) Manufacturer
  • ASTM B729 UNS N08020 Cold drawn seamless tubing (CDS) distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Cold drawn seamless tubing (CDS)
  • Alloy 20 Cold drawn seamless tubing (CDS)
  • Ni-Cr-Mo alloy Cold drawn seamless tubing (CDS)
  • Nickel - Chromium alloy Cold drawn seamless tubing (CDS)
  • ASTM B729 UNS N08020 Alloy 20 Cold drawn seamless tubing (CDS) Size: 6.35 mm OD To 152 mm OD

Incoloy Alloy 20 Electric resistance welded (ERW)
Incoloy Alloy 20 Electric resistance welded (ERW), ASTM B729 UNS N08020 Electric resistance welded (ERW), B729 UNS N08020 Electric resistance welded (ERW) suppliers in India

ASTM B729 UNS N08020 Alloy 20 Electric resistance welded (ERW) Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Electric resistance welded (ERW) suppliersIncoloy Alloy 20 Electric resistance welded (ERW) suppliers
  • ASTM B729 UNS N08020 Alloy 20 Electric resistance welded (ERW) Manufacturer
  • ASTM B729 UNS N08020 Electric resistance welded (ERW) distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Electric resistance welded (ERW)
  • Alloy 20 Electric resistance welded (ERW)
  • Ni-Cr-Mo alloy Electric resistance welded (ERW)
  • Nickel - Chromium alloy Electric resistance welded (ERW)
  • ASTM B729 UNS N08020 Alloy 20 Electric resistance welded (ERW) Size: 6.35 mm OD To 152 mm OD

Alloy 20cb3 Drawn over mandrel (DOM)
Incoloy Alloy 20 Drawn over mandrel (DOM), ASTM B729 UNS N08020 Drawn over mandrel (DOM), B729 UNS N08020 Drawn over mandrel (DOM) suppliers in India

ASTM B729 UNS N08020 Alloy 20 Drawn over mandrel (DOM) Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Drawn over mandrel (DOM) suppliersIncoloy Alloy 20 Drawn over mandrel (DOM) suppliers
  • ASTM B729 UNS N08020 Alloy 20 Drawn over mandrel (DOM) Manufacturer
  • ASTM B729 UNS N08020 Drawn over mandrel (DOM) distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Drawn over mandrel (DOM)
  • Alloy 20 Drawn over mandrel (DOM)
  • Ni-Cr-Mo alloy Drawn over mandrel (DOM)
  • Nickel - Chromium alloy Drawn over mandrel (DOM)
  • ASTM B729 UNS N08020 Alloy 20 Drawn over mandrel (DOM) Size: 6.35 mm OD To 152 mm OD

ASME SB729 Alloy 20 Heat Exchanger Pipe
Incoloy Alloy 20 Heat Exchanger Tube, ASTM B729 UNS N08020 Heat Exchanger Tube, B729 UNS N08020 Heat Exchanger Tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Heat Exchanger Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Heat Exchanger Tube suppliersIncoloy Alloy 20 Heat Exchanger Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Heat Exchanger Tube Manufacturer
  • ASTM B729 UNS N08020 Heat Exchanger Tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Heat Exchanger Tube
  • Alloy 20 Heat Exchanger Tube
  • Ni-Cr-Mo alloy Heat Exchanger Tube
  • Nickel - Chromium alloy Heat Exchanger Tube
  • ASTM B729 UNS N08020 Alloy 20 Heat Exchanger Tube Size: 6.35 mm OD To 152 mm OD

ASTM B729 UNS N08020 Alloy 20 Finned Pipe
Incoloy Alloy 20 Finned Tube, ASTM B729 UNS N08020 Finned Tube, B729 UNS N08020 Finned Tube suppliers in India

ASTM B729 UNS N08020 Alloy 20 Finned Tube Trade Name & Size:

  • ASTM B729 UNS N08020 Alloy 20 Finned Tube suppliersIncoloy Alloy 20 Finned Tube suppliers
  • ASTM B729 UNS N08020 Alloy 20 Finned Tube Manufacturer
  • ASTM B729 UNS N08020 Finned Tube distributor in Malaysia
  • Incoloy Alloy 20 Material suppliers
  • Incoloy Alloy 20 Nickel Finned Tube
  • Alloy 20 Finned Tube
  • Ni-Cr-Mo alloy Finned Tube
  • Nickel - Chromium alloy Finned Tube
  • ASTM B729 UNS N08020 Alloy 20 Finned Tube Size: 6.35 mm OD To 152 mm OD

Test: Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector

Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Equipment: Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc

ASTM B729 UNS N08020 Alloy 20 Seamless Pipe Origin: West Europe / Japanese / Indian / USA / Korean / American / European

Test Certificates for ASTM B729 UNS N08020 Alloy 20 Seamless Pipe: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

ALLOY PRODUCT FORM DIMENSION
NICKEL 200 (99.0 Ni min) Tube; cold drawn, annealed, seamles 16.0 x 1.5 mm
NICKEL 200/201 (99.0 Ni min) Pipe; cold drawn, annealed 33.4 x 3.38 mm (1"nb sch60s)
NICKEL 200/201 (99.0 Ni min) Pipe; cold drawn, annealed 48.26 x 2.77 mm (1½"nb sch10s)
NICKEL 200/201 (99.0 Ni min) Pipe; cold drawn, annealed 60.33 x 2.77 mm (2"nb Sch10s)
NICKEL 200/201(99.0 Ni min) Pipe; cold drawn, annealed 60.33 x 3.91 mm (2"nb sch60s)
NICKEL 200/201 (99.0 Ni min) Pipe; cold drawn, annealed 88.9 x 3.05 mm (3"nb Sch10s)
NICKEL 200/201 (99.0 Ni min) Pipe; cold drawn, annealed 114.3 x 3.05 mm (4"nb Sch10s)
Alloy 20 Welded Pipe

Alloy 20 Welded Pipe

Alloy 20 Pipe Latest Price List

Supplier of 20cb3 Seamless Pipe & Alloy 20 Welded Tube with all test reports & MTC
  • Alloy 20/Carpenter 20Cb3/NO8020/NS312 steel pipe
    FOB price: US $10-1000 / Meter
  • ASTM B729 UNS N08020 Nickel-Alloy Pipe
    FOB price: US $1-999999 / Ton
  • ASTM B729 UNS NO8020 Alloy 20 Seamless Pipes
    FOB price: US $19-22 / Kilogram
  • Selling UNS N08020 ASTM B729 alloy 20 pipe
    FOB price: US $500-1000 / Ton
  • Alloy 20 UNS N0 8020 Din 2.4660 CARPENTER 20 20Cb-3 bar
    10 Kilograms (Min. Order)
  • Ni80Cr20 nickel chrome pipe/tube
    FOB price: US $12.0 / Kilograms
  • Alloy 20 Carpenter 20Cb3 UNS NO8020 NS312 2.4660 nickel alloy elbolet
    FOB price: US $100-3000 / Piece
  • alloy 20 seamless pipes,astm a729 uns no8020 alloy steel pipes for sale
    FOB price: US $500-1200 / Metric Ton
  • ASTM B464 uns no8020 alloy 20 welded pipes
    FOB price: US $8-25 / Kilogram
  • Alloy 20 Carpenter 20Cb3 UNS NO8020 NS312 2.4660 nipolet
    FOB price: US $100-3000 / Piece
  • alloy 20 welded pipes,ASTM B464 uns no8020 welded pipes
    FOB price: US $22.6-25.5 / Kilogram
  • astm a729 uns no8020 alloy steel pipes for sale
    FOB price: US $26.6-28.5 / Kilogram
  • ASTM B729 UNS N08020 Nickel-Alloy Pipe
    FOB price: US $1-999999 / Ton
  • export Alloy 20 ASTM B729 Seamless Pipe to Iran, Iraq, Italy, UAE, Bahrain,
    FOB price: US $1-100 / Ton
  • astm b729 uns n08020 steel pipe
    FOB price: US $521-1673 / Metric Ton
  •  

Alloy 20 Tube suppliers

Alloy 20 Tube

Carpenter 20 Pipe composition and properties

ASTM B729 UNS N08020 Alloy 20 Seamless Pipe Properties:

Tensile Strength

80 ksi

Yield Strength

35ksi

Elongation

30%

Hardness MAX

217

ASTM B729 UNS N08020 Alloy 20 Seamless Pipe composition:

Nickel

32.5-35%

Chromium

19-21%

Carbon

0.06% maximum

Copper

3-4%

Molybdenum

2-3%

Manganese

2% maximum

Silicon

1% maximum

Columbium

1% maximum

Iron

31-44% (balance)

Alloy 20 Seamless Pipe Size Chart

Supplier of Alloy DIN NR. 2.4660 Tubing in all types including Coiled, Boiler, and Heat Exchanger Tubes
OUT DIAMETER WALL THICKNESS LENGTH
NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters
Seamless (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters
Welded (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters