API 5L X42 Pipe

Exporter and supplier of Grade X42 PSL1 ERW and API 5L X42 PSL2 Seamless Pipe material in India

API 5L is a specification of pipes that are used in transportations of corrosive and non-corrosive fluids and gases at high pressures. The API 5L X42 Pipe is made with a chemical composition of carbon, manganese, potassium phosphorous, molybdenum, chromium, silicon, and sulfur. These pipes can be easily machined or bent. The API 5L X42 Seamless Pipe is designed with excellent mechanical properties. They possess a tensile strength of a minimum of 60,200psi and a yield strength of a minimum of 42,100psi. The API 5L X42 PSL1 Welded Pipe is produced when pieces of steel are welded together with the help of a filler. These pipes are easy to maintain and can last for many years. X42 ERW Pipe is highly resistant against all forms of corrosion and has highly stress-resistant. The wall thickness of these ERW pipes ranges between 2.11mm to 24.61mm. The API 5L Gr X42 HIC Pipeline possesses good resistance against pitting induced by hydrogen in various applications and systems. They have a nominal pipe size of 1/2 OD to 48 OD. The API 5L Grade X42 Pipe is widely used in boiler equipment, oil refineries, pressure vessels, power generation, sugar, petrochemical industries, etc. We are the leading supplier of the API 5L X42 Pipe in Mumbai. We supply high-quality products at the most feasible rates.

The API X42 Carbon Steel Line Pipe can be produced with both cold and hot-rolling procedures. When cold-rolled these, pipes are enhanced with an excellent finish and superior strength. API 5L X 42 Carbon Steel Seamless Pipe is produced from a single piece of steel. As a result, these pipes are very strong and a little expensive pipe in the X42 grade. They are available in sizes 2 to 28 meters. The SCH 40 X42 Carbon Steel Pipe can be used in high and low-pressure systems. These pipes possess a smooth interior which allows them to be cleaned and maintained easily. API 5L X42 Grade B LSAW Pipe possesses a single weld seam on the outer surface. These pipes are used in the transportation of hydrocarbons over large distances. They are protected against contamination from the environment. The API 5L X42 Gr B DSAW Pipe possesses one seam in the interior and one in the exterior. These pipes are cost-effective and high-efficiency pipes used in different applications. The API 5L X42 PSL2 material is designed with higher tensile and yield strengths for all its products compared to the PSL1 material. They also possess excellent fracture toughness. This API 5L Grade X42 High Yield Pipe possesses extreme strength which enables them to suffice at extreme pressures and elevated temperatures. These pipes are conditioned with excellent corrosion, abrasion, and impact resistance properties. The Grade X42 PSL2 Spiral Pipe is produced from a series of coiled steel. These pipes are durable and available sizes of 6mm-25.4mm. All our products including the X42 Steel Nace Pipe can be easily customized in different shapes and sizes as per your requirements.

The API 5L Grade X42 PSL2 Epoxy Coated Pipe is a mixture of resin and a polyamine hardener. The coating in these pipes helps protect against corrosion and helps increase the flow by 20%. API 5L Grade X42 PSL1 Sour Service Pipe is designed to deal with hazardous fluids. These cost-effective pipes are used in various H2S environments. They ensure a tight seal as fluids and gases travel through them. The X42 Grade PSL2 Pipeline possesses high mechanical properties for high-pressure containment, extreme corrosion resistance properties, and extreme temperature tolerances. The Grade X42 PSL1 Pipe Line is made up of lower mechanical properties and is a cost-effective pipe. These pipes are widely used in domestic water supply, oil and gas transport systems use these pipes interchangeably. X42 Grade PSL1 Line Pipe is available with an outer diameter of 73mm to 630mm. They possess a wall thickness of 6mm-35mm. If you have any queries or want to know more about our X42 Pipe, contact us for more information. 

Wide stock of API 5L Grade X42 Pipe for oil and gas pipeline transmissions, Saudi Aramco approved API 5L X42 Seamless and ERW Pipe according to ISO 15156/ NACE MR0175 standards

API 5L Grade X42 Pipe Specification

Finding API 5L Grade X42 High Yield Pipe for Sour Service and H2S environment? Supplier and distributor of SCH 40 X42 Carbon Steel Pipe in India and , Before you order Don't forget to compare our price list with other

Types of API 5L X42 Steel Pipe

A leading API 5L X42 Pipe supplier in India stock wide range of X42 Steel Nace Pipe and API 5L X42 PSL1 Welded Pipe, view X42 Pipe weight, equivalent material and yield strength mpa

API 5L Grade X42 Pipe Coating

Range of API 5L X42 PSL1 Pipes for sour service, Offshore service, Oilfield, Oil & Gas

Check MSL and Jindal make API 5L X42 Grade B LSAW Pipe price in India, distributor, stockholder and wholesaler of EN 10208-1/ EN 10208-2 Grade X42 PSL2 Spiral Pipe manufactured by Tenaris, Nippon Steel, ISMT and V&M

API 5L X42 Seamless Pipe Latest Price List

• ERW Steel Line Pipe API 5L Grade X42 PSL 2
  FOB Price: US $500-1200 / Ton
• Schedule 80 api-5l-gr. X42 psl 2 carbon casing steel pipe
  FOB Price: US $800-3000 / Meter
• carbon steel API 5 L X42 psl 1 pipe
  FOB Price: US $650-850 / Ton

X42 ERW Pipe composition and properties

API 5L X42 Pipe Chemical Composition

X42 Pipe Yield Strength

API 5L X42 PSL1 Welded Pipe Coating Standard

• ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
• ISO 21809 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems
• DIN 30670 Polyethylen coatings of steel pipes and fittings

API 5L Grade X42 High Yield Pipe Wall Thickness

Supplier and exporter of Galvanized/ Epoxy and 3LPE Coated API X42 Carbon Steel Line Pipe and API 5L Gr X42 HIC Pipeline in all sizes and thickness such as Schedule 40, SCH 80

API 5L Gr X42 HIC Pipeline Pressure Rating