ASTM A333 Grade 6 Pipe

A333 Grade 6 Seamless Pipe & Thick Wall SA333 Pipe supplier in Mumbai, India

ASTM A333 is an alloy, which is used in low-temperature services. The ASTM A333 Grade 6 Pipe is a carbon steel pipe, which is designed following ASTM, API, and ASTM standards. The aim of designing this pipe is to have a pipe, which is available to function at low temperatures. The A333 Seamless Pipe is designed with a single piece of steel. These pipes are very strong and have good constituents of carbon, sulfur, silicon, and phosphorus in their compositions. The A333 Gr 6 ERW Pipe is designed with a wall thickness of 3mm-12mm and has sizes ranging from ½ to 36 inches. These pipes are produced by welding pieces of steel together longitudinally. The A333 Grade 6 Coated Pipe is coated with a layer of protective material. Pipes with this coating are protected against corrosion and abrasion. They allow fluids and gases to move at high speeds and temperatures. The Ltcs ASTM A333 Gr 6 Schedule 40 Pipe is used in low-temperature service of -45 degrees C. They are widely seen in use in marine industries, oil and gas refining, food processing units, petrochemical industries, etc. We are the leading stockist of ASTM A333 Grade 6 Pipe in Mumbai. Our vision is aimed at producing top-quality products at reasonable rates for all.

ASTM A333 GRADE 6 Pipe suppliers

The A333 Welded Pipe Material is extremely durable and strong. They are used in welding together pieces of steel to form a pipe or tube with the help of fillers. This material is considerably cheap compared to that of seamless pipes. The A333 Grade 6 Seamless Pipe is designed with a tensile strength of minimum 415Mpa and yield strength of above 240Mpa. These pipes can be easily elongated by 35% longitudinally and still have good workability. The A333 Galvanized Pipe Material comprises of high-quality zinc, which is coated on pipes when they are dipped in it. These galvanized pipes don’t corrode or rust for up to 100 years. The Epoxy Lined SA333 Gr 6 Material is made up of thermoset plastics, which are used in various applications for their strength and toughness. This material acts as glue and prevents damage in pipes and other engineering applications. SA 333 Gr 6 Lined Pipe Material helps protect the pipe from corrosion, leaks, or cracks due to roots. The material when inserted in pipes, increases the flow rate by 20% and allows the pipe to be cleaned easily. The SA333 gr6 Cement Lined Pipe is widely used in potable water and sewage treatment industries. These pipes are strong, stable, and preferably not moved from one place to the other. We make use of the best A333 Gr 6 Material along with cutting-edge technology while producing the best products in the ASTM A333 grade.

Thick Wall SA333 Pipe is designed with wall thickness similar to or above the sch80 pipes. These pipes are used in high-pressure and important systems. They are available in plain, threaded, or beveled ends. Heavy Wall A333 Steel Pipe is designed with a thickness of above 25mm. These pipes are used to transport oil, gas, and important gases from one location to the other. They have an A333 Carbon Steel Double Wall Pipe in case of a leakage or spillage in the main pipe. The casing for the second pipe may be made using a thinner pipe. The Thin Wall ASTM A333 Pipe is obtained by the cold rolling process. When the thickness of the outer diameter is less than 6% of the wall thickness then it is a thin-walled pipe. These pipes have a thin wall and are between schedules 10-60. The ASTM A333 Grade 6 Nace Pipe is made up of alloys, which are resistant to sulfide and chloride-induced cracking. We are amongst the Large Diameter A333 Grade 6 Pipe distributors who can custom-built a pipe, as per your requirements. If you have any queries or want to know more about our products of the A333 grade, contact us.

Supplier of Internally / External A333 Grade 6 Coated Pipe and A333 Gr 6 ERW Pipe as per ISO/ EN


ASTM A333 GRADE 6 Pipe Specification

Searching A333 Grade 6 Pipe distributors in India for fastest delivery? Wide stock of Beveled End ASTM A333 Gr 6 Schedule 40 Pipe & ASTM A333 Seamless Pipe as per ASME B36.19/ B36.10, check FBE, Cement, Epoxy Lined Ltcs A333 Carbon Steel Double Wall Pipe price per meter in Mumbai

ASTM A333 GRADE 6 Pipe Size Range: 1/2” NB to 36” NB
Wall Thickness: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
Carbon Steel Pipe Specifications: ASTM A/ASME SA 53 Grade A, B | ASTM A/ASME SA 106 Grade A, B, C | ASTM A/ASME SA 333 Grade 1, 6 | API 5L – PSL 1 Gr. A, B, X42, X46, X52, X56, X60, X65, X70 | API 5L – PSL 2 Gr. B, X42, X46, X52, X56, X60, X65, X70
Weld Alternatives: ERW, HF, DSAW/SAWL, SMLS, HSAW
Specifications: ASTM A/ASME SA 179 | ASTM A/ASME SA 192, ASTM A/ASME SA 210 Gr. 1, C | BS 3059 PART II GR. 360, 440, 620 | DIN 2391, ST 35, ST 37, ST 45, ST 52
Size Range: 1/2” to 6”, both OD and NB sizes available
Thickness: 50mm to 7.00mm, custom OD and thickness available on request
End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded
Type: Seamless / ERW / Welded / Fabricated / CDW
Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
Length: Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths

Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Hardness Test, Blow Test, Impact Test, etc.), Exterior Size Inspection, Hydrostatic Test (The standard pressure is limited to 20,7 MPa (3000 psi)), X-ray Test.
Mill Test Certificate: EN 10204/3.1B, Mill TC EN 10204 3.1 | Lab Test Reports | Ex-Stock
Third party inspection: SGS, BV, Lloyds etc.


OD Size Range:

ERW: 0.375" through 30"
HF: 0.840" through 24"
DSAW/SAWL: 12.75" through 144"

SMLS: 0.840" through 26"
HSAW: 8.625" through 144"

ASTM A333 GRADE 6 Pipe Wall Thickness: ERW: 0.120" through 1.000"
HF: 0.120" through 1.000"
DSAW/SAWL: 0.250" through 6.000"

SMLS: 0.250" through 2.500"
HSAW: 0.250" through 1.000"
Lengths: Single Random
Double Random
Custom (up to 300')
Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
Various steel pipe external coating projects are currently implemented by our company including single-layer/double-layer FBE, 2PE,3PE,3PP and other anti-corrosion coatings with the performed standards such as DIN30670, DIN30671,DIN30678,CAN/CSA-Z245.21-M92,SY/T4013-2002 and SY/T0315-97 etc.
End Finishes: Beveled, Square Cut, Threaded & Coupled.
Additional Services: Internal Coating
Carbon Steel Pipe & Tubes Standard API 5L, API-2B, CSA Z245, ASTM A53, A106, ASTM A252, AS 1163, IPS 190 etc
ASTM A53, ASTM A106, ASTM A500/501-98, ASTM A519-98, JIS G3441-1994, JIS G3444-1994, BS EN 10210-1, GB3087-1999, ASTM A179, ASTM A106, JIS G3454, GB/T8163-1999, ASTM A53-98, JIS G3452-1998, JIS G3454-1998, ASTM A106, DIN 1629-1984, API 5D, GB9948-1988
Origin Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin
Mills Indian Mills, Japanese Mills, Korean Mills, European MIlls, US Mills, Russian Mills, Ukraine MIlls
Value added service Galvanised Finish | Black Oil Paint | Heat Marked Pipes | Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements
Specialized Line Pipe ASTM A333 GRADE 6 Pipe, Seamless and Welded API 5L Grade B Carbon Steel Pipes Up To 48” Available in ready stock
ASTM A333 GRADE 6 Pipe Thickness SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
ASTM A333 GRADE 6 Pipe Applications Oil Refineries, Petrochemicals, Power Generation (Nuclear/Thermal), Steel, Sugar, Boiler Equipments, Pressure Vessels and General Engineering Purposes
High Yield Seamless Pipe API 5L Gr. X42, X46, X52, X56, X60, X65, X70, X80, X100 PSL-1/PSL-2
High Yield ERW/SAW Pipe API 5L Gr. X42, X46, X52, X56, X60, X65, X70, X80, X100 PSL-1/PSL-2
High Yield ERW/SAW Pipe ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485
ASTM A333 GRADE 6 Pipe Other similar group grades GR A, GR B, X42, X46, X52, X56, X60, X65, X70, X80 etc.
End Connections for Line Pipes Plain, Bevel, Screwed, Threaded
ASTM A333 GRADE 6 Pipe Type Seamless / ERW / Welded / Fabricated / CDW
API 5L Pipe Form Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
API Line Pipe Length Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths
ASTM A333 GRADE 6 Pipe Packing ASTM A333 GRADE 6 Pipe Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Finishes Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.End Finishes:Beveled, Square Cut, Threaded & Coupled.
Specials Customize Sizes and Specifications also available as per customer's specification in short time
Specialized Products Carbon Steel Drill Pipe, Carbon Steel Petroleum Cracking Tube, Carbon Steel Seamless Steel Tubes for Liquid Service, Carbon Steel Tube for Structural Purposes, API 5L PSL 2 Seamless Carbon Steel, Carbon Steel Line Pipe
Inspection, Test Reports Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate, Mill TC EN 10204 3.1, Lab Test Reports, Flatten test, Impact test, Tensile test, Yield Test, Ex-Stock, Hydro test, UT test, DWT test if agreed etc

ASTM A333 GRADE 6 Pipe Coating Standard

ASTM A333 GRADE 6 Pipe Coating TypeASTM A333 GRADE 6 Pipe Coating LayerASTM A333 GRADE 6 Pipe Coating thickness
Three layers polyethylene Inside layer: epoxy (Green) 2.0 -4.5mm
Mid layer: adhensive (White)
Outsidelayer:polyethylene (Black)
Two layers polyethylene Inside layer: adhensive 2.0 -4.5mm
Outside layer: polythene
Epoxy Epoxy 200-400um
Two layers epoxy Inside layer: expoxy (Green) 400-800um
Outside layer:intensity epoxy (sage green)
Three layers polyethylene Inside layer: expoxy (Green) 2.5 -3mm
Mid layer: adhensive (White)
Outside layer: polypropylene (White)

ASTM A333 GRADE 6 Pipe Latest Price List

Supplier & exporter of OD Sch-10/ 40/ 60/ XXS ASTM A333 Galvanized Pipe Material & A333 Welded Pipe with NACE MR0175 test reports
  • ASTM A106 grade b erw welded mild low price emt conduit pipe
    FOB Price: US $635-750 / Metric Ton
  • ASTM A106 Grade b SCH40 HS Code Carbon Seamless Steel Pipe
    FOB Price: US $500-700 / Metric Ton
  • Hot-rolled carbon steel seamless pipe ASTM A106 A53 Grade B carbon seamless steel pipe
    FOB Price: US $590.0-600.0 / Ton
  • 24 Inch ASTM A106 Grade B Hot Rolled Black Steel Seamless SCH 80 Carbon Steel Pipe Price Per Ton
    FOB Price: US $1-700 / Ton
  • 2017 BEST ASTM A106 grade a b c S20C SS400 Seamless carbon steel pipes for high-temperature service
    FOB Price: US $500-1000 / Ton
  • high quality ASTM A106 grade b seamless carbon steel pipe
    FOB Price: US $499.0-650.0 / Tons
  • ASTM A106 grade b sch40 seamless steel pipe
    FOB Price: US $580-650 / Metric Ton
  • Steel pipe steel tube ASTM A53 Grade B ERW blacksteel pipe
    FOB Price: US $450-550 / Ton
  • Greenhouse Pre galvanized SHS hollow section ASTM A53 grade b erw steel pipe
    FOB Price: US $410-450 / Ton
  • ASTM A53 Grade B seamless steel pipe
    FOB Price: US $600-2000 / Ton
  • Hot-rolled carbon steel seamless pipe ASTM A106 A53 Grade B carbon seamless steel pipe
    FOB Price: US $590.0-600.0 / Ton
  • ASTM A53 Grade B ERW steel pipe water pipes Galvanized
    FOB Price: US $400-499 / Metric Ton
  • ASTM A106 grade b sch40 seamless steel pipe
    FOB Price: US $580-650 / Metric Ton
  • ASTM A53 GRADE B 25MM COMPRESSOR PIPE
    FOB Price: US $350-550 / Ton
  • ASTM A53 A500 BS1387 Grade B carbon steel pipe with galvanized or oil in the surfac
    FOB Price: US $350-499 / Ton
  • ASTM A53 grade b ms steel seamless pipe in dubai
    FOB Price: US $340-460 / Ton
  • carbon steel API 5 L X65 psl 1 pipe
    FOB Price: US $700-850 / Ton
  • carbon steel smls api 5l gr X65 psl 1 pipe
    FOB Price: US $550-850 / Metric Ton
  • API 5L X65 PIPES
    FOB Price: US $2000-3800 / Metric Ton
  • GOCT 24950-81 Bent Branch 90 1020 X 10(9) K 56
    FOB Price: US $30-1720 / Piece
  • API 5L X65 LSAW Steel Pipes
    FOB Price: US $600-750 / Ton
  • Size 40 x 80 thickness 1.3 mm api 5l X65 psl2 steel pipe
    FOB Price: US $690-720 / Ton
  • API 5L Gr.B PSL-1 and PSL-2 seamless and ERW steel pipe
    FOB Price: US $500-6000 / Ton
  • API 5L GRB;X-42;X-52;X-60;X-65;X-70;X-80 PSL-1/PSL-2 steel pipe line;erw/saw pipe manufacturer
    FOB Price: US $630-1100 / Ton
  • api 5l gr b X65 psl 2 carbon steel seamless pipe
    FOB Price: US $600-800 / Metric Ton

ASTM A333 GRADE 6 Pipe composition and properties

Chemical Requirements

  Composition, %  
Element Grade 1 Grade 3 Grade 6
Carbon, max 0.30 0.19 0.30
Manganese 0.40 - 1.06 0.31 - 0.64 0.29 - 1.06
Phosphorous, max 0.025 0.025 0.025
Sulfur, max 0.025 0.025 0.025
Silicon 0.18 -0.37 0.10 min
Nickel 3.18 - 3.82

For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.

When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.

Tensile Requirements
he material shall conform to the requirements as proscribed:

Grade 1 Grade 3 Grade 6
psi MPa psi MPa psi MPa
Tensile Strength, min 55,000 380 65,000 450 60,000 415
Yield Strength, min 30,000 205 35,000 240 35,000 240
Longitudinal  Transverse Longitudinal  Transverse Longitudinal  Transverse
Elongation in 2 in. or 50 mm, (or 4D), min, %:
Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section 35 35 30 20 30 16.5
When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used 28 20 22 14 22 12
For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage 1.75 1.25 1.50 1.00 1.50 1.00
  Elongation in 2 in. or 50 mm, min, %:

Wall Thickness Grade 1 Grade 3 Grade 6
in. mm Longitudinal  Transverse Longitudinal  Transverse Longitudinal  Transverse
5/16 (0.312) 8 35 25 30 20 30 16
9/32 (.281) 7.2 33 24 28 19 28 15
1/4 (.250) 6.4 32 23 27 18 27 15
7/32 (.219) 5.6 30 26 26
3/16 (.188) 4.8 28 24 24
5/32 (.156) 4 26 22 22
1/8 (.125) 3.2 25 21 21
3/32 (.094) 2.4 23 20 20
1/16 (.063) 1.6 21   18   18  

Impact Requirements
For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed:

Size of Specimen, min Minimum Average Notched Bar Impact Value of Each Set of Three Specimens Minimum Notched Bar Impact Value of One Specimen Only of a Set Impact Temperature
  ft-lbf J ft-lbf J Grade Min Impact 
Test Temp
10 by 10 13 18 10 14   F C
10 by 7.5 10 14 8 11 1 -50 -45
10 by 6.67 9 12 7 9 3 -150 -100
10 by 5 7 9 5 7 6 -50 -45
10 by 3.33 5 7 3 4  
10 by 2.5 4 5 3 4  


Mechanical Testing

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.

For material heat treated by the continuous process, tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 pipe.

Hydrostatic Test
Impact Test -  One notched bar impact test, consisting of breaking three specimens shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe.

ASTM A333 GRADE 6 Pipe Pressure Rating

Cut to length ASTM A333 Grade 6 Nace & SA 333 Gr 6 Lined Pipe at lowest price, wide range of Thin /Heavy Wall/ Large Diameter A333 Gr 6 Material in our Mumbai & Ahmedabad warehouse

ASTM A333 GRADE 6 Pipe Maximum Allowable Pressure (kPa)

Nominal Size
(mm)
Schedule no. Wall Thickness
(mm)
Temperature (oC)
-29 - 38 205 260 350 370 400 4301) 450
Maximum Allowable Stress (MPa)
137.8 137.8 130.2 117.1 115.7 89.6 74.4 59.9
15 STD 40 2.77 34416 34416 32528 29255 28910 22372 18589 14972
XS 80 3.73 48092 48092 45466 40878 40396 31260 25969 20918
160 4.78 62830 62830 59378 53404 52777 40837 33929 27333
XXS 7.47 98245 98245 92836 83507 82522 63857 53053 42739
20 STD 40 2.87 28070 28070 26526 23860 23578 18245 15158 12209
XS 80 3.91 39418 39418 37247 33506 33106 25617 21283 17142
160 5.56 58152 58152 54955 49429 48843 37799 31398 25293
XXS 7.82 83107 83107 78539 70643 69809 54024 44881 36152
25 STD 40 3.38 26251 26251 24804 22310 22048 17060 14173 11417
XS 80 4.55 36283 36283 34285 30862 30474 23584 19595 15785
160 6.35 52481 52481 49594 44606 44082 34112 28339 22827
XXS 9.09 77030 77030 72793 65476 64704 50070 41595 33506
32 STD 40 3.56 21614 21614 20421 18369 18155 14049 11672 9404
XS 80 4.85 30178 30178 28518 25651 25348 19616 16295 13125
160 6.35 40596 40596 38364 34505 34099 26389 21924 17659
XXS 9.70 64601 64601 61045 54906 54266 41988 34884 28097
40 STD 40 3.68 19444 19444 18375 16529 16329 12636 10550 8454
XS 80 5.08 27402 27402 25900 23295 23019 17811 14800 11919
160 7.14 39738 39738 37599 33816 33416 25858 21483 17308
XXS 10.16 58779 58799 55547 49966 49374 38205 31742 25569
50 STD 40 3.91 16378 16378 15468 13925 13759 10645 8847 7124
XS 80 5.54 23653 23653 22351 20105 19871 15378 12774 10287
160 8.74 38866 38866 36731 33037 32652 25266 20987 16908
XXS 11.07 50793 50793 48003 43173 42670 33017 27429 22096
65 STD 40 5.16 17914 17914 16929 15227 15048 11644 9674 7793
XS 80 7.01 24818 24818 23447 21097 20849 16129 13401 10797
160 9.53 34615 34615 32714 29420 29076 22503 18693 15055
XXS 14.02 53081 53081 50159 45116 44585 34498 28662 23088
80 STD 40 5.49 15558 15558 14969 13222 13063 10108 8399 6766
XS 80 7.62 21986 21968 20780 18693 18472 14290 11871 9563
160 11.13 33079 33079 31253 28111 27780 21497 17859 14386
XXS 15.24 46976 46976 44392 39928 39459 30536 25369 20436
100 STD 40 6.02 13187 13187 12464 11210 11079 8571 7124 5739
XS 80 8.56 19058 19058 18010 16198 16012 12388 12094 8289
120 11.13 25190 25190 23805 21407 21159 16371 13601 10995
160 13.49 31019 31019 29310 26368 26058 20160 16750 13208
XXS 17.12 40348 40348 38129 34298 33892 26230 21786 17549
125 STD 40 6.55 11561 11561 10921 9825 9708 7510 6243 5038
XS 80 9.53 17060 17060 16122 14503 14331 11093 9212 7421
120 12.70 23130 23130 21855 19657 19430 15034 12492 10059
160 15.88 29407 29407 27787 24997 24701 19113 15881 12795
XXS 19.05 35897 35897 33926 30516 30158 23337 19388 15620
150 STD 40 7.11 10550 10550 9928 8924 8819 6828 5370 4568
XS 80 10.97 16474 16474 15571 14007 13842 10707 8895 7165
120 14.27 21745 21745 20553 18448 18265 14138 11747 9460
XXS 160 18.26 28325 28325 26768 24074 23784 18410 15296 12319
200 20 6.35 7138 7138 6745 6063 5994 4637 3852 3100
30 7.04 7924 7924 7489 6732 6656 5147 4279 3445
STD 40 8.18 9246 9246 8737 7855 7765 6008 4995 4024
60 10.31 11741 11741 11093 9977 9860 7627 6339 5105
XS 80 12.70 14572 14572 13766 12388 12237 9474 7868 6338
100 15.09 17452 17452 16488 14834 14655 11341 9426 7593
120 18.26 21345 21345 20174 18148 17935 13876 11527 9288
140 20.62 24308 24308 22971 20656 20415 15799 13125 10569
XXS 22.23 26334 26334 24877 22386 22124 17115 14221 11458
160 23.01 27340 27340 25838 23240 22964 17769 14765 11892
250 20 6.35 5698 5698 5388 4844 4789 3707 3080 2480
30 7.8 7028 7028 6642 5974 5905 4568 3796 3059
STD 40 9.27 8385 8385 7923 7131 7048 5450 4527 3652
XS 60 12.7 11596 11596 10955 9853 9736 7538 6263 5043
80 15.09 13863 13863 13098 11781 11644 9012 7483 6028
100 18.26 16922 16922 15992 14386 14214 10996 9136 7359
120 21.44 20036 20036 18934 17032 16825 13022 10817 8716
XXS 140 25.4 23998 23998 16474 20394 20153 15599 12960 10438
160 28.58 27229 27229 25734 23143 22875 17700 14703 11844
300 20 6.35 4795 4795 4534 4072 4024 3114 2591 2088
30 8.38 6359 6359 6008 5402 5540 4134 3431 2763
STD 9.53 7241 7241 6842 6153 6084 4706 3914 3149
40 10.31 7854 7854 7421 6676 6601 5015 4244 3417
XS 12.70 9722 9722 9191 8268 8165 6318 5250 4230
60 14.27 10969 10969 10363 9322 9212 7131 5925 4768
80 17.48 13525 13525 12850 11492 11362 8792 7303 5884
100 21.44 16736 16736 15819 14227 14062 10879 9040 7283
XXS 120 25.4 20015 20015 18913 17011 16811 13008 10804 8702
140 28.58 22682 22682 21435 19278 19051 14744 12244 9866
160 33.32 26740 26740 25273 22730 22461 17383 14441 11630
350 10 6.35 4361 4361 4120 3707 3665 2831 2356 1895
20 7.92 5457 5457 5161 4644 4589 3548 2949 2377
STD 30 9.53 6580 6580 6222 5595 5533 4279 3555 2866
40 11.13 7717 7717 7310 6559 6477 5016 4168 3355
XS 12.70 8833 8833 8351 7510 7421 5739 4768 3845
60 15.09 10541 10541 9963 8964 8861 6855 5691 4589
80 19.05 13421 13421 12684 11410 11272 9723 7248 5836
100 23.83 16949 16949 16019 14407 14242 11017 9157 7372
120 27.79 19933 19933 18837 16943 16743 12960 10762 8675
140 31.75 22964 22964 21703 19519 19292 14931 12402 9990
160 35.71 26051 26051 24618 22144 21883 16936 14069 11334
400 10 6.35 3810 3810 3603 3238 3197 2474 2060 1660
20 7.92 4768 4768 4507 4051 4004 3100 2577 2074
STD 30 9.53 5746 5746 5429 4885 4830 3734 3100 2501
XS 40 12.70 7703 7703 7283 6545 6470 5009 4126 3349
60 16.66 10176 10176 9618 8654 8550 6614 5498 4430
80 21.44 13208 13208 12478 11224 11093 8585 7131 5746
100 26.19 16274 16274 15378 13835 13670 10576 8785 7076
120 30.96 19409 19409 18341 16481 16302 12616 10480 8440
140 36.53 23130 23130 21855 19657 19430 15034 12492 10059
160 40.49 25824 25824 24404 21952 21697 16784 13945 11238
450 10 6.35 3383 3383 3197 2873 2839 2198 1826 1474
20 7.92 4230 4230 3996 3597 3555 2749 2287 1839
STD 9.53 5099 5099 4816 4334 4286 3314 2756 2219
XS 30 11.13 5967 5967 5643 5071 5016 3879 3225 2598
12.70 6835 6835 6456 5808 5739 4437 3686 2969
40 14.27 7696 7696 7276 6545 6463 5002 4155 3349
60 19.05 10349 10349 9784 8799 8695 6725 5588 4499
80 23.83 13043 13043 12326 11086 10955 8475 7042 5670
100 29.36 16219 16219 15323 13787 13622 10542 8757 7055
120 34.93 19464 19464 18389 16543 16350 12650 10507 8468
140 39.67 22282 22282 21056 18941 18713 11483 12030 9694
160 45.24 25638 25638 24225 21793 21531 16660 13842 11155
500 10 6.35 3038 3038 2873 2574 2556 1977 1640 1323
STD 20 9.53 4582 4582 4327 3893 3852 2976 2474 1991
XS 30 12.70 6139 6139 5801 5216 5154 3989 3314 2666
40 15.09 7317 7317 6911 6215 6146 4754 3948 3183
60 20.62 10080 10080 9522 8564 8468 6552 5443 4382
80 26.19 12898 12898 12188 10962 10831 8385 6966 5608
100 32.54 16171 16171 15287 13746 13580 10514 8730 7035
120 38.10 19085 19085 18037 16226 16033 12409 10307 8302
140 44.45 22475 22475 21242 19106 18879 14614 12140 9777
160 50.01 25450 25450 24094 21675 21421 16577 13766 11093
600 10 6.35 2529 2529 2391 2150 2129 1647 1364 1102
STD 20 9.53 3810 3810 3603 3238 3197 2474 2060 1660
XS 12.70 5097 5097 4816 4334 4286 3314 2756 2219
30 14.27 5739 5739 5423 4878 4823 3734 3100 2494
40 17.48 7055 7055 6670 5994 5925 4589 3810 3066
60 24.61 10018 10018 9467 8516 8420 6511 5409 4361
80 30.96 12691 12691 12002 10783 10659 8254 6856 5519
100 38.89 16102 16102 15220 13690 10528 10466 8695 7007
120 46.02 19223 19223 18168 16336 16150 12491 10383 8364
140 52.37 22048 22048 20835 18741 18520 14331 11906 9591
160 59.54 25279 25279 23888 21489 21235 16433 13649 10996

ASTM A333 GRADE 6 Pipe Sizes

Size Size OD WT Length Kgs./Mtr.
1/2" x Sch 40 15 x Sch 40 21.3 OD 2.77 mm 5 To 7 1.27
1/2" x Sch 80 15 x Sch 80 21.3 mm 3.73 mm 5 To 7 1.62
1/2" x Sch 160 15 x Sch 160 21.3 mm 4.78 mm 5 To 7 1.95
1/2" x Sch XXS 15 x Sch XXS 21.3 mm 7.47 mm 5 To 7 2.55
3/4" x Sch 40 20 x Sch 40 26.7 mm 2.87 mm 5 To 7 1.69
3/4" x Sch 80 20 x Sch 80 26.7 mm 3.91 mm 5 To 7 2.20
3/4" x Sch 160 20 x Sch 160 26.7 mm 5.56 mm 5 To 7 2.90
3/4" x Sch XXS 20 x Sch XXS 26.7 OD 7.82 mm 5 To 7 3.64
1" x Sch 40 25 x Sch 40 33.4 OD 3.38 mm 5 To 7 2.50
1" x Sch 80 25 x Sch 80 33.4 mm 4.55 mm 5 To 7 3.24
1" x Sch 160 25 x Sch 160 33.4 mm 6.35 mm 5 To 7 4.24
1" x Sch XXS 25 x Sch XXS 33.4 mm 9.09 mm 5 To 7 5.45
1 1/4" x Sch 40 32 x Sch 40 42.2 OD 3.56 mm 5 To 7 3.39
1 1/4" x Sch 80 32 x Sch 80 42.2 mm 4.85 mm 5 To 7 4.47
1 1/4" x Sch 160 32 x Sch 160 42.2 mm 6.35 mm 5 To 7 5.62
1 1/4" x Sch XXS 32 x Sch XXS 42.2 mm 9.7 mm 5 To 7 7.78
1 1/2" x Sch 40 40 x Sch 40 48.3 OD 3.68 mm 5 To 7 4.05
1 1/2" x Sch 80 40 x Sch 80 48.3 mm 5.08 mm 5 To 7 5.42
1 1/2" x Sch XXS 40 x Sch XXS 48.3 mm 10.15 mm 5 To 7 9.55
2" x Sch 40 50 x Sch 40 60.3 OD 3.91 mm 5 To 7 5.44
2" x Sch 80 50 x Sch 80 60.3 mm 5.54 mm 5 To 7 7.48
2" x Sch 160 50 x Sch 160 60.3 mm 8.74 mm 5 To 7 11.12
2 1/2" x Sch 40 65 x Sch 40 73 OD 5.16 mm 5 To 7 8.64
2 1/2" x Sch 80 65 x Sch 80 73 mm 7.01 mm 5 To 7 11.41
2 1/2" x Sch 160 65 x Sch 160 73 mm 9.53 mm 5 To 7 14.92
2 1/2" x Sch XXS 65 x Sch XXS 73 mm 14.02 mm 5 To 7 20.40
3" x Sch 40 80 x Sch 40 88.9 OD 5.49 mm 5 To 7 11.30
3" x Sch 80 80 x Sch 80 88.9 mm 7.62 mm 5 To 7 15.28
3" x Sch 160 80 x Sch 160 88.9 mm 11.13 mm 5 To 7 21.35
3" x Sch XXS 80 x Sch XXS 88.9 mm 15.24 mm 5 To 7 27.69
3 1/2" x Sch 40 90 x Sch 40 101.6 OD 5.74 mm 5 To 7 13.57
3 1/2" x Sch 80 90 x Sch 80 101.6 mm 8.08 mm 5 To 7 18.64
4" x Sch 40 100 x Sch 40 114.3 OD 6.02 mm 5 To 7 16.07
4" x Sch 80 100 x Sch 80 114.3 mm 8.56 mm 5 To 7 22.33
4" x Sch 120 100 x Sch 120 114.3 mm 11.13 mm 5 To 7 28.33
4" x Sch 160 100 x Sch 160 114.3 mm 13.49 mm 5 To 7 33.55
4" x Sch XXS 100 x Sch XXS 114.3 mm 17.12 mm 5 To 7 41.04

ASTM A333 GRADE 6 Pipe Wall Thickness

NPS 
(in)
Outside Diameter
(in)
ASTM A333 GRADE 6 Pipe Schedule
SCH 10 SCH 20 SCH 30 SCH STD SCH 40 SCH 60 SCH XS SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 SCH XXS
ASTM A333 GRADE 6 Pipe Wall Thickness (in)
1/8 0.405 0.068 0.068 0.095 0.095
1/4 0.540 0.088 0.088 0.119 0.119
3/8 0.675 0.091 0.091 0.126 0.126
1/2 0.840 0.109 0.109 0.147 0.147 0.187 0.294
3/4 1.050 0.113 0.113 0.154 0.154 0.219 0.308
1 1.315 0.133 0.133 0.179 0.179 0.250 0.358
1 1/4 1.660 0.140 0.140 0.191 0.191 0.250 0.382
1 1/2 1.900 0.145 0.145 0.200 0.200 0.281 0.400
2 2.375 0.154 0.154 0.218 0.218 0.344 0.436
2 1/2 2.875 0.203 0.203 0.276 0.276 0.375 0.552
3 3.500 0.216 0.216 0.300 0.300 0.438 0.600
3 1/2 4.000 0.226 0.226 0.318 0.318
4 4.500 0.237 0.237 0.337 0.337 0.438 0.531 0.674
5 5.563 0.258 0.258 0.375 0.375 0.500 0.625 0.750
6 6.625 0.280 0.280 0.432 0.432 0.562 0.719 0.864
8 8.625 0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.812 0.906 0.875
10 10.750 0.250 0.307 0.365 0.365 0.500 0.500 0.594 0.719 0.844 1.000 1.125 1.000
12 12.750 0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.125 1.312 1.000
14 14.000 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.250 1.406
16 16.000 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.438 1.594
18 18.000 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.562 1.781
20 20.000 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.750 1.969
22 22.000 0.250 0.375 0.500 0.375 0.875 0.500 1.125 1.375 1.625 1.875 2.125
24 24.000 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.062 2.344
30 30.000 0.312 0.500 0.625 0.375 0.500
32 32.000 0.312 0.500 0.625 0.375 0.688
34 34.000 0.312 0.500 0.625 0.375 0.688
36 36.000 0.312 0.500 0.625 0.375 0.750
42 42.000 0.500 0.625 0.375 0.750