ASTM A335 P11 Pipe

UNS K11597 High Pressure Pipe and SA 335 gr P11 Seamless Pipe supplier in India

The A335 alloy pipes are produced with higher alloying elements compared to standard carbon steel pipes. The ASTM A335 P11 Pipe is manufactured with main chemical constituents of 1-1.50% of chromium, carbon, 0.44-0.65 of molybdenum, and 0.50-1% of sulfur. It has small traces of carbon, manganese, phosphorous, and silicon. The ASTM A335 P11 Steel Chrome Pipe is designed to resist corrosion in various corrosive environments. They possess excellent oxidation resistance and can perform well in extreme pressures and temperatures. In the NBR 5603, P11 Chrome Pipe cold rolling or cold drawing procedures can take place after the initial hot-rolling process. These pipes can be heat treated or subjected to isothermal annealing at temperatures up to 1200 degrees F. The SA335 gr P11 Round Pipe is widely used in chemical industries, oil, and gas transportation systems, sugar industries, petrochemical industries, etc. We are the leading A335 P11 Pipe suppliers in India. Our goals are aimed at providing the best products at the most reasonable rate for all.

ASTM A335 P11 Pipe

The UNS K11597 High Pressure Pipe is used in various pressure systems and applications. These pipes possess excellent strength and hardness to protect them from leaks and breaks. The Alloy Steel SA 335 P11 High Pressure Pipe is designed with an excellent tensile strength of not less than 60 Ksi while having a yield strength of a minimum of 30 Ksi. These pipes, like the ASTM A335 Grade P11, Alloy Pipe can be elongated by a minimum of 20%-30%. They possess good bending, flanging, and general formation properties. This is one of the common pipes used in the A335 grade. The SA335 P11 IBR Pipe is manufactured following strict standards of tolerances, pressures, etc. set by the Indian Boiler Regulation. The Steel Grade P11 ASTM A335 Chrome Moly Pipe is provided with enhanced hardness, wear resistance, and toughness. These pipes are available in sizes of 1/8NB to 30NB. The ASTM A335 P11 Alloy Steel Pipe is available in a wall thickness of 3-14mm. The length of the pipe can be up to 16000mm, which can be customized on request. The ASTM P11 Steel Pipe is covered with a rubber cap in the end so that they are not damaged during transportation. Our experienced workers make use of the best ASTM A335 gr P11 Material and latest technology while producing the best products.

The P11 Seamless Pipe is extremely strong due to the unique composition and materials used in producing these pipes. These pipes may not be dimensionally accurate but, their other properties make up for a small flaw. The SA 335 gr P11 Seamless Pipe is available in different shapes namely round, rectangular, square, hydraulic. Each shape has its special properties and applications. The AS ASTM A335 gr P11 Seamless Pipe is available with outer dimensions of 19.05mm – 114.3mm. They can be availed with a beveled end, treaded, end or a plain end of different custom sizes. Ferritic Alloy Steel ASTM A335P11 Seamless Pipe is available in schedules of 20, 30, 40, 80, XS, 60, 80, 120, 140, 160, XXS. These pipes can also be fabricated if the requirement arises. Alloy P11 ASTM A335 High Temperature Seamless Pipe can be used in various applications where the temperatures are elevated between 590 °C. These pipes don’t dissociate or deform easily under extreme pressures or temperatures. The SA335P11 Boiler Steel Pipe is available in surface finishes of bare, oiled, varnished, and galvanized. They can also be coated with epoxy, Fbe, concrete coating to give it enhanced corrosion protection. The Steel Grade P11 Smls Pipe is expensive as compared to the welded pipes as they are made from a single piece of steel. However, these seamless pipes possess better wear and tear resistance compared to the welded pipes. The Low Alloy ASTM A335 P11 Pipe Material is designed to increase the strength and hardness of the pipe. They reduce the elasticity a little while increasing the latter. We are amongst the P11 Pipe suppliers who can customize all your products in different shapes and sizes as per our client's requests. If you have any queries or want to know more about our products or the ASTM A335 P11 Pipe, contact us for more information.

View ASTM A335 gr P11 Material and P11 Seamless Pipe sizes in mm and lengths as per ANSI/ ASME B36.10M


ASTM A335 P11 Pipe Specification Chart

Steel Tubes India supplies SA335 P11 IBR Pipe and ASTM A335 P11 Steel Chrome Pipe pipes to Oil & Gas Industry. Get a quote today to find out how much you could save.

Size 1/2 to 36 Inch NB
Standard ASTM A335 P11, SA335 P11
Material Thickness 3 To 12 mm
Schedules SCH 40, SCH 160, SCH 80, SCH XXS, SCH XS, All Schedules
Tolerance Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
Type ERW / Seamless / Welded / Fabricated
Craft Cold rolled and Cold drawn
Length Standard
Double &
In Cut length also.
pipe available in Form of Round, Rectangular, Square, Hydraulic
End Beveled End, Plain End, Treaded

P11 Seamless Pipe Composition Standard

Buy ISMT, Jindal, MSL, Bao steel ASTM A335 grade P11 Alloy Pipe and SA335 gr P11 Round Pipe at dealer price in Mumbai, our SA335P11 Boiler Steel Pipe are IBR approved

ASTM A335 P11 Manganese Molybdenum Phosphorus Carbon Sulfur Chromium Silicon
0.30 – 0.60 0.44 – 0.65 0.025 max 0.05 – 0.15 0.025 max 1.00 – 1.50 0.50 – 1.00

SA335 P11 IBR Pipe Mechanical Characteristics

Yield Properties Tensile Properties Elongational
205 min 415 min 30 min

SA 335 gr P11 Seamless Pipe Surface Finish

Looking for P11 Pipe suppliers suppliers who already supplied in your country? Heavy wall steel pipe Alloy Steel SA 335 P11 High Pressure Pipe and Low Alloy ASTM A335 P11 Pipe Material stockist in Mumbai as per ISO 10474/ EN 10204 3.1/ PED 2014/68/EU and IBR

Surface Finishes: Bare, Mill Varnish, Oiled, Galv, FBE Dual, FBE, 3LPE, Coal Tar, 3LPP, Concrete Coating and Tape Wrap.
End Finishes: Square Cut, Beveled, Threaded & Coupled.

NBR 5603 P11 Chrome Pipe Tolerance

ASTM A450 Hot rolled Outside Diameter, mm Tolerance, mm
Outer Diameter≤101.6 +0.4/-0.8
101.6<Outer Diameter≤190.5 +0.4/-1.2
190.5<Outer Diameter≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
Outer Diameter<25.4 ±0.10
25.4≤Outer Diameter≤38.1 ±0.15
38.1<Outer Diameter<50.8 ±0.20
50.8≤Outer Diameter<63.5 ±0.25
63.5≤Outer Diameter<76.2 ±0.30
76.2≤Outer Diameter≤101.6 ±0.38
101.6<Outer Diameter≤190.5 +0.38/-0.64
190.5<Outer Diameter≤228.6 +0.38/-1.14
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance, mm
1/8≤Outer Diameter≤1-1/2 ±0.40
1-1/2<Outer Diameter≤4 ±0.79
4<Outer Diameter≤8 +1.59/-0.79
8<Outer Diameter≤12 +2.38/-0.79
Outer Diameter>12 ±1%

Alloy Steel SA 335 P11 High Pressure Pipe Size Chart

Find your size in our online inventory of Ferritic Alloy Steel ASTM A335P11 Seamless Pipe, NBR 5603 P11 Chrome Pipe and ASTM A335 P11 Alloy Steel Pipe in Mumbai at competitive pricing
Outer Diameter * Thickness in MM Outer Diameter * Thickness in MM Outer Diameter * Thickness in MM
38.1 * 3.2 57.0 * 4.9 76.2 * 4.0
38.1 * 4.0 57.0 * 6.3 76.2 * 5.0
38.1 * 6.3 57.0 * 7.9 76.2 * 6.3
42.4 * 3.2 60.3 * 3.2 82.5 * 4.5
42.4 * 4.0 60.3 * 3.6 88.9 * 3.2
44.5 * 3.2 60.3 * 5.0 88.9 * 3.6
44.5 * 6.3 63.5 * 3.2 88.9 * 4.0
48.3 * 3.2 63.5 * 3.6 101.6 * 3.6
48.3 * 3.6 63.5 * 4.0 101.6 * 4.5
50.8 * 4.5 63.5 * 6.3 101.6 * 6.3
51.0 * 3.2 63.5 * 7.9 114.3 * 3.6
51.0 * 3.6 70.0 * 3.2 114.3 * 5.0
51.0 * 6.3 70.0 * 3.6 139.7 * 4.0
57.0 * 3.2 70.0 * 6.3 139.7 * 5.0
57.0 * 3.6 76.2 * 3.6 139.7 * 6.3

SA335 gr P11 Round Pipe Weight Chart

Size Nominal Pipe Size Pipe Outer Diameter Wall Thickness Pipe Inner Diameter Weight per Foot
1/2 0.84 0.109 0.622 0.85
0.147 0.546 1.09
0.188 0.464 1.31
0.294 0.252 1.72
3/4 1.05 0.113 0.824 1.13
0.154 0.742 1.48
0.219 0.612 1.95
0.308 0.434 2.44
1 1.315 0.133 1.049 1.68
0.179 0.957 2.17
0.250 0.815 2.85
0.358 0.599 3.66
1 1/4 1.66 0.140 1.380 2.27
0.191 1.278 3.00
0.250 1.160 3.77
0.382 0.896 5.22
1 1/2 1.90 0.145 1.610 2.72
0.200 1.500 3.63
0.281 1.338 4.86
0.400 1.100 6.41
2 2.375 0.109 2.157 2.64
0.154 2.067 3.66
0.218 1.939 5.03
0.250 1.875 5.68
0.281 1.813 6.29
0.344 1.687 7.47
0.436 1.503 9.04
2 1/2 2.875 0.120 2.635 3.53
0.203 2.469 5.80
0.216 2.443 6.14
0.250 2.375 7.02
0.276 2.323 7.67
0.375 2.125 10.02
0.552 1.771 13.71
3 3.50 0.120 3.260 4.34
0.156 3.188 5.58
0.172 3.156 6.12
0.188 3.124 6.66
0.216 3.068 7.58
0.250 3.000 8.69
0.281 2.938 9.67
0.300 2.900 10.26
0.438 2.624 14.34
0.600 2.300 18.6
3 1/2 4.0 0.120 3.760 4.98
0.226 3.548 9.12
0.250 3.500 10.02
0.281 3.438 11.17
0.318 3.364 12.52
0.636 2..728 22.87
4 4.5 0.120 4.260 5.62
0.156 4.188 7.24
0.188 4.124 8.67
0.203 4.094 9.32
0.219 4.062 10.02
0.237 4.026 10.80
0.250 4.000 11.36
0.281 3.938 12.67
0.312 3.876 13.97
0.337 3.826 15.00
0.438 3.624 19.02
0.531 3.438 22.53
0.674 3.152 27.57
5 5.563 0.188 5.187 10.80
0.219 5.125 12.51
0.258 5.047 14.63
0.281 5.001 15.87
0.312 4.939 17.51
0.344 4.875 19.19
0.375 4.813 20.80
0.500 4.563 27.06
0.625 4.313 32.99
0.750 4.063 38.59
6 6.625 0.109 6.407 7.59
0.134 6.357 9.30
0.156 6.313 10.79
0.188 6.249 12.94
0.203 6.219 13.94
0.219 6.187 15.00
0.250 6.125 17.04
0.280 6.065 18.99
0.312 6.001 21.06
0.344 5.937 23.10
0.375 5.875 25.05
0.432 5.761 28.60
0.500 5.625 32.74
0.562 5.501 36.43
0.625 5.375 40.09
0.719 5.187 45.39
0.864 4.897 53.21
1.000 4.625 60.13
1.125 4.375 66.14