ASTM A335 P5 Pipe

UNS K41245 Chrome Pipe and SA 335 gr P5 Seamless Pipe supplier in Mumbai

A335 P5 pipe is made up of ferritic-stainless steel alloy. The ASTM A335 P5 Pipe –IBR is manufactured following all dimensions, pressure classes, weights, etc. set by the Indian Boiler Regulation. These pipes are composed of high concentrations of chromium, silicon, and molybdenum. The ASTM A335 P5 Pipe due to the good chemical composition is highly corrosion-resistant. The concentration of molybdenum increases the wear resistance, impact qualities, and hardenability. The ASTM P5 IBR Pipe is available in schedules of 20, 30, 40, STD, XH, 80, 110, 120, 140, 160, XXH and heavier. The higher schedule the better are its tolerances. The UNS K41245 Chrome Pipe increases the tensile and yield strength of most pipes. They are designed with a tensile strength of a minimum 60Ksi and possess a yield strength of a minimum 30Ksi. The NBR 5603 P5 Chrome Moly Pipe can be easily elongated by 30% and still possess excellent workability. These pipes are available in shapes of round, rectangular, square, hydraulic, etc. The SA335 P5 Round Pipe is widely used in oil, gas refineries, machine building, fertilizer production, sugar industries, etc. We are the leading P5 Pipe supplier in the country. Our goal is to supply top-quality products at the most feasible rates.

ASTM A335 P5 Pipe

The SA 335 gr P5 Seamless Pipe is produced from a single sheet of steel. The material used in producing them makes them a little expensive. However, these pipes are comparatively stronger and better than welded pipes. This is why the SA335 gr P5 High Temperature Seamless Pipe is used in several refineries and industries. These pipes can suffice easily in high-temperatures as they are tempered or annealed at 675 degrees C. The AS ASTM A335 gr P5 Boiler Steel Pipe requires either low or high-pressure pipes. These pipes are designed to withstand high temperatures and pressures in the boilers and don’t deform easily. The ASTM A335 gr P5 High Pressure Pipe is used in pressure piping systems in various chemical industries. They transport highly corrosive and toxic fluids and gases from place to place. The Steel Grade P5 ASTM A335 High Pressure Seamless Pipe is available with an outer diameter of 1/2NB to 60NB. Their wall thickness ranges in schedules of 5, 10, 40, 80, and 160. The SA335P5 Seamless Pipe is suitable for bending and flanging operations. These pipes are available in nominal sizes of 1/8 inches to 30 inches. We make use of the latest technology and best ASTM A335 P5 Steel Material while producing the best A335 P5 pipes.

The ASTM A335 Grade P5 Alloy Pipe is manufactured following ASTM, ASME, and API standards. These pipes are available in a wall thickness of up 250mm, which can be customized on request. The ASTM A335 P5 Alloy Steel Pipe end tubing is available in the form of beveled, plain, or threaded ends. Their lengths are available in sizes of single random, cut length, and double random. Low Alloy ASTM A335 P5 Steel Pipe is designed with excellent strength and hardness. Their elasticity is reduced but, they are easy to maintain and highly reliable. The Alloy P5 ASTM A335 Round Pipe is very durable due to its unique chemical composition. These pipes inhibit pitting due to chloride and sulfides. Apart from this, they also possess excellent creep resistance. Alloy Steel A335 P5 Chrome Pipe is made from non-heat treatable grades. These pipes are magnetic and are easy to clean and maintain. The length of these pipes ranges up to 13500mm. The Ferritic Alloy Steel ASTM A335P5 Pipe material used in the production of these pipes gives them excellent mechanical properties and strength. The Steel Grade P5 Seamless Pipe along with, our other products can be custom-built for our clients in different shapes and sizes. If you have any queries or want to know more about our products or the ASTM A335 P5 Pipe –IBR, contact us. 

check IBR certified SA335 P5 Round Pipe and ASTM A335 P5 Steel Material outer diameter (OD), wall thickness (WT), and length as per ANSI/ ASME B36.10M


ASTM A335 P5 Alloy Steel Pipe Specification

We stock a full range of Galvanised & Coated ASTM A335 gr P5 High Pressure Pipe material and SA335 gr P5 High Temperature Seamless Pipe in India, ASTM A335 gr P5 Boiler Steel Pipe available in Schedule 40/ 60/ STD & XXS

Size 1/2 to 36 Inch NB
Standard ASTM A335 P5, SA335 P5
Schedules SCH 40, SCH 160, SCH 80, SCH XXS, SCH XS, All Schedules
Material Thickness 3 To 12 mm
Tolerance Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
Type ERW / Seamless / Welded / Fabricated
Craft Cold rolled and Cold drawn
Length Standard
Double &
In Cut length also.
pipe available in Form of Round, Rectangular, Square, Hydraulic
End Beveled End, Plain End, Treaded

Low Alloy ASTM A335 P5 Steel Pipe Thickness Chart

ASTM A335 P5 Pipes Types Out diameter Wall thickness Length
SA 335 gr P5 Seamless Pipe 1/2" NB - 60" NB SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Custom
Low Alloy ASTM A335 P5 Welded Pipes 1/2" NB - 24" NB As per requirement Custom
SA335 P5 ERW Pipes 1/2" NB - 24" NB As per requirement Custom
AS ASTM A335 gr P5 Boiler Steel Pipe 16" NB - 100" NB As per requirement Custom

ASTM A335 P5 Pipe Surface Finish

Don't forget to check our price of Low Alloy ASTM A335 P5 Steel Pipe and NBR 5603 P5 Chrome Moly Pipe and after sales services, we also supply custom size SA335P5 Seamless Pipe at best price in India

Surface Finishes: Bare, Mill Varnish, Oiled, Galv, FBE Dual, FBE, 3LPE, Coal Tar, 3LPP, Concrete Coating and Tape Wrap.
End Finishes: Square Cut, Beveled, Threaded & Coupled.

ASTM A335 grade P5 Alloy Pipe Tolerance

Searching Saudi Aramco approved P5 Pipe suppliers for oil and gas pipeline projects? Wide stock of Ferritic Alloy Steel ASTM A335P5 Pipe material and A335 P5 Alloy Steel Pipe in Mumbai warehouse
ASTM A450 Hot rolled Outside Diameter, mm Tolerance, mm
Outer Diameter≤101.6 +0.4/-0.8
101.6<Outer Diameter≤190.5 +0.4/-1.2
190.5<Outer Diameter≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
Outer Diameter<25.4 ±0.10
25.4≤Outer Diameter≤38.1 ±0.15
38.1<Outer Diameter<50.8 ±0.20
50.8≤Outer Diameter<63.5 ±0.25
63.5≤Outer Diameter<76.2 ±0.30
76.2≤Outer Diameter≤101.6 ±0.38
101.6<Outer Diameter≤190.5 +0.38/-0.64
190.5<Outer Diameter≤228.6 +0.38/-1.14
ASTM A530 & ASTM A335 NPS Outside Diameter, inch Tolerance, mm
1/8≤Outer Diameter≤1-1/2 ±0.40
1-1/2<Outer Diameter≤4 ±0.79
4<Outer Diameter≤8 +1.59/-0.79
8<Outer Diameter≤12 +2.38/-0.79
Outer Diameter>12 ±1%

SA335P5 Seamless Pipe Size Chart

Outer Diameter * Thickness in MM Outer Diameter * Thickness in MM Outer Diameter * Thickness in MM
38.1 * 3.2 57.0 * 4.9 76.2 * 4.0
38.1 * 4.0 57.0 * 6.3 76.2 * 5.0
38.1 * 6.3 57.0 * 7.9 76.2 * 6.3
42.4 * 3.2 60.3 * 3.2 82.5 * 4.5
42.4 * 4.0 60.3 * 3.6 88.9 * 3.2
44.5 * 3.2 60.3 * 5.0 88.9 * 3.6
44.5 * 6.3 63.5 * 3.2 88.9 * 4.0
48.3 * 3.2 63.5 * 3.6 101.6 * 3.6
48.3 * 3.6 63.5 * 4.0 101.6 * 4.5
50.8 * 4.5 63.5 * 6.3 101.6 * 6.3
51.0 * 3.2 63.5 * 7.9 114.3 * 3.6
51.0 * 3.6 70.0 * 3.2 114.3 * 5.0
51.0 * 6.3 70.0 * 3.6 139.7 * 4.0
57.0 * 3.2 70.0 * 6.3 139.7 * 5.0
57.0 * 3.6 76.2 * 3.6 139.7 * 6.3

Weight of SA335 P5 Round Pipe

IBR approved Alloy Steel Grade P5 ASTM A335 High Pressure Seamless Pipe and Alloy Steel A335 P5 Chrome Pipe suitable for harsh environment & thermal plant
Size Nominal Pipe Size Pipe Outer Diameter Wall Thickness Pipe Inner Diameter Weight per Foot
1/2 0.84 0.109 0.622 0.85
0.147 0.546 1.09
0.188 0.464 1.31
0.294 0.252 1.72
3/4 1.05 0.113 0.824 1.13
0.154 0.742 1.48
0.219 0.612 1.95
0.308 0.434 2.44
1 1.315 0.133 1.049 1.68
0.179 0.957 2.17
0.250 0.815 2.85
0.358 0.599 3.66
1 1/4 1.66 0.140 1.380 2.27
0.191 1.278 3.00
0.250 1.160 3.77
0.382 0.896 5.22
1 1/2 1.90 0.145 1.610 2.72
0.200 1.500 3.63
0.281 1.338 4.86
0.400 1.100 6.41
2 2.375 0.109 2.157 2.64
0.154 2.067 3.66
0.218 1.939 5.03
0.250 1.875 5.68
0.281 1.813 6.29
0.344 1.687 7.47
0.436 1.503 9.04
2 1/2 2.875 0.120 2.635 3.53
0.203 2.469 5.80
0.216 2.443 6.14
0.250 2.375 7.02
0.276 2.323 7.67
0.375 2.125 10.02
0.552 1.771 13.71
3 3.50 0.120 3.260 4.34
0.156 3.188 5.58
0.172 3.156 6.12
0.188 3.124 6.66
0.216 3.068 7.58
0.250 3.000 8.69
0.281 2.938 9.67
0.300 2.900 10.26
0.438 2.624 14.34
0.600 2.300 18.6
3 1/2 4.0 0.120 3.760 4.98
0.226 3.548 9.12
0.250 3.500 10.02
0.281 3.438 11.17
0.318 3.364 12.52
0.636 2..728 22.87
4 4.5 0.120 4.260 5.62
0.156 4.188 7.24
0.188 4.124 8.67
0.203 4.094 9.32
0.219 4.062 10.02
0.237 4.026 10.80
0.250 4.000 11.36
0.281 3.938 12.67
0.312 3.876 13.97
0.337 3.826 15.00
0.438 3.624 19.02
0.531 3.438 22.53
0.674 3.152 27.57
5 5.563 0.188 5.187 10.80
0.219 5.125 12.51
0.258 5.047 14.63
0.281 5.001 15.87
0.312 4.939 17.51
0.344 4.875 19.19
0.375 4.813 20.80
0.500 4.563 27.06
0.625 4.313 32.99
0.750 4.063 38.59
6 6.625 0.109 6.407 7.59
0.134 6.357 9.30
0.156 6.313 10.79
0.188 6.249 12.94
0.203 6.219 13.94
0.219 6.187 15.00
0.250 6.125 17.04
0.280 6.065 18.99
0.312 6.001 21.06
0.344 5.937 23.10
0.375 5.875 25.05
0.432 5.761 28.60
0.500 5.625 32.74
0.562 5.501 36.43
0.625 5.375 40.09
0.719 5.187 45.39
0.864 4.897 53.21
1.000 4.625 60.13
1.125 4.375 66.14

UNS K41245 Chrome Pipe Chemical Structure

ASTM A335 P5 Pipe Carbon Chromium Sulfur Silicon Manganese Molybdenum Phosphorus
0.05 To 0.15 1.00 To 1.50 0.025 maximum 0.50 To 1.00 0.30 To 0.60 0.44 To 0.65 0.025 maximum

Mechanical Strength of ASTM A335 gr P5 High Pressure Pipe

Tensile Strength Yield Strength Elongation
415 Minimum 205 Minimum 30 Minimum