ASTM A335 P9 Pipe and SA 335 gr P9 Seamless/ Welded/ Boiler Pipes

SA 335 gr P9 Seamless Pipe and Alloy Steel UNS S50400 Chrome Pipe Material supplier in Mumbai, India

P9 pipes of the ASTM A335 grade are produced with higher alloying elements compared to general carbon pipes. The ASTM A335 P9 Pipe is composed of chemical composition of 8-10% chromium, 0.25-1% silicon and 0.90-1.10% molybdenum. It also has small amounts of carbon, manganese, phosphorous, and sulfur. The SA 335 gr P9 Material is highly corrosion and oxidation resistant. They are designed to perform well under extreme pressures and high temperatures. The ASTM A335 Grade P9 Alloy Pipe is suitable for bending, flanging, and all forming operations. These pipes are manufactured following all international and national standards. The UNS S50400 Chrome Pipe is available in lengths up to 16000mm. They are manufactured following all ASME, ASTM, and API standards. The outer diameter of these pipes ranges from 19.05 inches to 114.3mm. The Ferritic Alloy Steel SA 335 P9 Chrome Pipe is highly versatile. It is widely used in oil, gas refining/transportation, petrochemical industries, power generation, etc. We are the leading manufacturers and suppliers of the ASTM A335 P9 Pipe. We thrive to produce top-quality products, which are feasible for all.

The ASTM A335 P9 Steel Seamless Pipe is produced by passing a hot billet onto a sheet. These pipes are very strong and are a preferred pipe choice in this grade. The Alloy P9 ASTM A335 Seamless Pipe possesses excellent mechanical properties. They are designed with a tensile strength of minimum 415Mpa and yield strength of minimum 205Mpa. The Steel Grade P9 ASTM A335 Smls Pipe is available in pipe lengths of single random, cut length, and double random. These tolerances of these pipes increase when they are cold drawn or cold rolled. The NBR 5603 P9 High Temperature Seamless Pipe is normalized and tempered at 67 degrees C during production. As a result, it is used in various high-temperature operations and industries. SA335 gr P9 High Pressure Pipe is a preferred pipe choice in oil and gas transportation units. These pipes can transport these corrosive gases and fluids in extreme conditions without any leaks or breakages. The A335 gr P9 Boiler Steel Pipe is manufactured to tackle both high-pressure and temperature requirements seen in industrial boiler tubes. These pipes are designed with added strength and hardness. The ASTM A335 gr P9 IBR Pipe is manufactured following all standard materials, grades, dimensions, pressure classes, etc. which are set by the Indian Boiler regulation in the country. We make use of the best Steel Grade P9 Pipe Material and the latest technology while producing the best P9 pipes.

The SA 335 Grade P9 Chrome Moly Pipe is available in different shapes, namely round, rectangular, square, hydraulic, etc. These pipes can be easily elongated by 30%. The SA335 P9 Round Pipe is available in sizes of 1/8NB to 24NB. These pipes are specialized for large diameter sizes. They come in beveled, plain, and threaded tubing ends. ASTM A335 P9 Alloy Steel Pipe is designed with a wall thickness of 2mm-14mm. The thickness of the entire pipe is between 3mm-12mm, and they are available in different schedules, which can be customized on request. The Low Alloy ASTM A335 P9 Steel Pipe can be cold-rolled after the hot-rolling process to give them desired properties. These pipes are extremely strong and can last for long periods. The SA335P9 Seamless Pipe along with, our other, products can be custom-built as per your requirements in different chemical compositions and sizes. If you have any queries or want to know more about our Alloy Steel A335 P9 Boiler Pipe, contact us.

Check ANSI/ ASME B36.10M SA335 gr P9 High Pressure Boiler Pipe and A335 gr P9 IBR Pipe wall thickness, outside diameter, inside diameter, and weight chart

Table of Content

ASTM A335 P9 Steel Seamless Pipe Specification
UNS S50400 Chrome Pipe Chemical Structure
ASTM A335 P9 Steel Seamless Pipe Mechanical Strength
SA 335 Grade P9 Chrome Moly Pipe Equivalent Material
ASTM A335 gr P9 IBR Pipe Surface Finish
A335 gr P9 Boiler Steel Pipe Tolerance
Sizes of Low Alloy ASTM A335 P9 Steel Pipe
Alloy Steel A335 P9 Boiler Pipe Weight Chart

ASTM A335 P9 Steel Seamless Pipe Specification

Stockist & distributor of SA335 P9 Round Pipe and ASTM A335 P9 Alloy Steel Seamless Pipe as per ANSI / ASME B36.10M, Check latest ASTM A335 P9 Alloy Steel Pipe price in India

Size	1/2 to 36 Inch NB
Standard	ASTM A335 P9, SA335 P9
Schedules	SCH 40, SCH 160, SCH 80, SCH XXS, SCH XS, All Schedules
Material Thickness	3 To 12 mm
Tolerance	Cold drawn pipe: +/-0.1mm Cold rolled pipe: +/-0.05mm
Type	ERW / Seamless / Welded / Fabricated
Craft	Cold rolled and Cold drawn
Length	Standard Double & In Cut length also.
pipe available in Form of	Round, Rectangular, Square, Hydraulic
End	Beveled End, Plain End, Treaded

UNS S50400 Chrome Pipe Chemical Structure

Carbon	Manganese	Phosphorus	Sulfur	Silicon	Chromium	Molybdenum
0.015 Maximum	0.30 To 0.60	0.025 Maximum	0.025 Maximum	0.50 Maximum	4.00 To 6.00	0.45 To 0.65

ASTM A335 P9 Steel Seamless Pipe Mechanical Strength

Compare our price with other SA335P9 Seamless Pipe and Low Alloy ASTM A335 P9 Pipe suppliers in India

Tensile Strength	Yield Strength	Elongation
415 Minimum	205 Minimum	30 Minimum

SA 335 Grade P9 Chrome Moly Pipe Equivalent Material

ASTM	ASME	JIS G 3458	UNS	BS	DIN	ISO
A335 P9	SA335 P9	STPA 26	S50400	3604 P1 629-470		2604 II TS38

ASTM A335 gr P9 IBR Pipe Surface Finish

Searching KNPC approved A335 gr P9 Boiler Steel Pipe and Ferritic Alloy Steel SA 335 P9 Chrome Pipe suppliers for oil and gas pipeline transmissions? ASTM A335 grade P9 Alloy Pipe available in 3/4"-24" sizes

Surface Finishes: Bare, Mill Varnish, Oiled, Galv, FBE Dual, FBE, 3LPE, Coal Tar, 3LPP, Concrete Coating and Tape Wrap.
End Finishes: Square Cut, Beveled, Threaded & Coupled.

A335 gr P9 Boiler Steel Pipe Tolerance

ASTM A450	Hot rolled	Outside Diameter, mm	Tolerance, mm
		Outer Diameter≤101.6	+0.4/-0.8
		101.6＜Outer Diameter≤190.5	+0.4/-1.2
		190.5＜Outer Diameter≤228.6	+0.4/-1.6
	Cold Drawn	Outside Diameter, mm	Tolerance, mm
		Outer Diameter＜25.4	±0.10
		25.4≤Outer Diameter≤38.1	±0.15
		38.1＜Outer Diameter＜50.8	±0.20
		50.8≤Outer Diameter＜63.5	±0.25
		63.5≤Outer Diameter＜76.2	±0.30
		76.2≤Outer Diameter≤101.6	±0.38
		101.6＜Outer Diameter≤190.5	+0.38/-0.64
		190.5＜Outer Diameter≤228.6	+0.38/-1.14
ASTM A530 & ASTM A335	NPS	Outside Diameter, inch	Tolerance, mm
		1/8≤Outer Diameter≤1-1/2	±0.40
		1-1/2＜Outer Diameter≤4	±0.79
		4＜Outer Diameter≤8	+1.59/-0.79
		8＜Outer Diameter≤12	+2.38/-0.79
		Outer Diameter>12	±1%

Sizes of Low Alloy ASTM A335 P9 Steel Pipe

Outer Diameter * Thickness in MM	Outer Diameter * Thickness in MM	Outer Diameter * Thickness in MM
38.1 * 3.2	57.0 * 4.9	76.2 * 4.0
38.1 * 4.0	57.0 * 6.3	76.2 * 5.0
38.1 * 6.3	57.0 * 7.9	76.2 * 6.3
42.4 * 3.2	60.3 * 3.2	82.5 * 4.5
42.4 * 4.0	60.3 * 3.6	88.9 * 3.2
44.5 * 3.2	60.3 * 5.0	88.9 * 3.6
44.5 * 6.3	63.5 * 3.2	88.9 * 4.0
48.3 * 3.2	63.5 * 3.6	101.6 * 3.6
48.3 * 3.6	63.5 * 4.0	101.6 * 4.5
50.8 * 4.5	63.5 * 6.3	101.6 * 6.3
51.0 * 3.2	63.5 * 7.9	114.3 * 3.6
51.0 * 3.6	70.0 * 3.2	114.3 * 5.0
51.0 * 6.3	70.0 * 3.6	139.7 * 4.0
57.0 * 3.2	70.0 * 6.3	139.7 * 5.0
57.0 * 3.6	76.2 * 3.6	139.7 * 6.3

Alloy Steel A335 P9 Boiler Pipe Weight Chart

Wide range of EN 10204 3.1/ IBR Alloy Steel A335 P9 Boiler Pipe and Grade P9 Pipe Material for boiler applications

Size Nominal Pipe Size	Pipe Outer Diameter	Wall Thickness	Pipe Inner Diameter	Weight per Foot
1/2	0.84	0.109	0.622	0.85
		0.147	0.546	1.09
		0.188	0.464	1.31
		0.294	0.252	1.72
3/4	1.05	0.113	0.824	1.13
		0.154	0.742	1.48
		0.219	0.612	1.95
		0.308	0.434	2.44
1	1.315	0.133	1.049	1.68
		0.179	0.957	2.17
		0.250	0.815	2.85
		0.358	0.599	3.66
1 1/4	1.66	0.140	1.380	2.27
		0.191	1.278	3.00
		0.250	1.160	3.77
		0.382	0.896	5.22
1 1/2	1.90	0.145	1.610	2.72
		0.200	1.500	3.63
		0.281	1.338	4.86
		0.400	1.100	6.41
2	2.375	0.109	2.157	2.64
		0.154	2.067	3.66
		0.218	1.939	5.03
		0.250	1.875	5.68
		0.281	1.813	6.29
		0.344	1.687	7.47
		0.436	1.503	9.04
2 1/2	2.875	0.120	2.635	3.53
		0.203	2.469	5.80
		0.216	2.443	6.14
		0.250	2.375	7.02
		0.276	2.323	7.67
		0.375	2.125	10.02
		0.552	1.771	13.71
3	3.50	0.120	3.260	4.34
		0.156	3.188	5.58
		0.172	3.156	6.12
		0.188	3.124	6.66
		0.216	3.068	7.58
		0.250	3.000	8.69
		0.281	2.938	9.67
		0.300	2.900	10.26
		0.438	2.624	14.34
		0.600	2.300	18.6
3 1/2	4.0	0.120	3.760	4.98
		0.226	3.548	9.12
		0.250	3.500	10.02
		0.281	3.438	11.17
		0.318	3.364	12.52
		0.636	2..728	22.87
4	4.5	0.120	4.260	5.62
		0.156	4.188	7.24
		0.188	4.124	8.67
		0.203	4.094	9.32
		0.219	4.062	10.02
		0.237	4.026	10.80
		0.250	4.000	11.36
		0.281	3.938	12.67
		0.312	3.876	13.97
		0.337	3.826	15.00
		0.438	3.624	19.02
		0.531	3.438	22.53
		0.674	3.152	27.57
5	5.563	0.188	5.187	10.80
		0.219	5.125	12.51
		0.258	5.047	14.63
		0.281	5.001	15.87
		0.312	4.939	17.51
		0.344	4.875	19.19
		0.375	4.813	20.80
		0.500	4.563	27.06
		0.625	4.313	32.99
		0.750	4.063	38.59
6	6.625	0.109	6.407	7.59
		0.134	6.357	9.30
		0.156	6.313	10.79
		0.188	6.249	12.94
		0.203	6.219	13.94
		0.219	6.187	15.00
		0.250	6.125	17.04
		0.280	6.065	18.99
		0.312	6.001	21.06
		0.344	5.937	23.10
		0.375	5.875	25.05
		0.432	5.761	28.60
		0.500	5.625	32.74
		0.562	5.501	36.43
		0.625	5.375	40.09
		0.719	5.187	45.39
		0.864	4.897	53.21
		1.000	4.625	60.13
		1.125	4.375	66.14