Carbon Steel Flanges and CS Blind/ Weld Neck Flanges manufacturer

ASME B16.5 CS Blind Flanges and Weld Neck Flange manufacturer in India

Flanges are used to connect 2 ends of a pipe or to end a pipe. They are available in various materials. Carbon Steel Flanges are one such type of flange that is usually made up of carbon steel. This material provides properties such as resistance to corrosion, excellent durability, and finishing in goods. They are available in various types. For instance,Carbon Steel Blind Flanges are used to terminate the pipe. High grade raw material is used to manufacture these flanges. They have a carbon content in the range of 0.25% to 0.60%. Due to the high volume of carbon and manganese, the fabrication of the product is excellent and ductility is also good.

Carbon Steel flanges manufacturers in India

There is another type of flange that is known as killed Carbon Steel Forged Flanges. They are destroyed in the melting process. Due to the addition of manganese, silicon, and aluminum during the production of steel, deoxidation takes place. Carbon Steel Plate Flanges are welded onto the pipe which helps in bolting and connecting one pipe to the other. It displays good ductility, and toughness. These Carbon Steel Pipe Flanges also work well in low temperatures. They are used in fuel and water pipelines. The cost of these flanges ranges between Rs 398 to Rs 689.

To strengthen and harden the steel and cast iron alloy Carbon Steel Slip On Flanges are passed through a process known as quenching. They are used in various construction, engineering, and petrochemical industries. The outer diameter of the slip on flange is also welded. Carbon Steel Weld Neck Flanges have a neck extension at the end. This type of flange is directly buttwelded to the pipe to provide a natural connection. Carbon Steel Flanges manufacturers in India recommend the use of these flanges when the conditions are critical and severe.

Exporter and supplier of Carbon Steel Slip On Flanges in Raised, RTJ and Flat Face

ASTM A105 Flange specification

Manufacturer of Tongue and Groove faces Carbon Steel Pipe Flanges in all types including Lap Joint, Spectacle Blinds, Orifice, LWN and Swivel Ring Flanges

CS Flange Type: Low Temp ASTM/ASME SA350 LF2 Forged Flanges, A105/105N Carbon Steel Flanges

Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Connect Type/ Flange Face Type: Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove

Size Range: 1/2" (15 NB) to 48" (1200NB) DN10~DN5000

CS Flange Class/ Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Facings: Raised Face, RTJ Flanges etc.

Standard: ANSI Flanges, ASME Flanges, JIS Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Surface treatment	Anti-rust oil, transparent/ yellow/ black anti trst paint, Zinc, hot dipped galvanized
Pressure	DIN:PN6 PN10 PN16 PN25 PN40; ANSI: class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc. JIS: 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Standard	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange B.S : BS4504 , BS3293, BS1560, BS10 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638 ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 AS 2129: table D; table E; table H Other Flange Standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276 American standard (ANSI) German (DIN) British standard (BS) Any other specilised flanges.
Production technique:	Forged, Heat treated and machined
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations ASTM A350 LF2 Threaded Flange, Slip-On Flange, Socketweld Flange, Weld Neck Flange, Blind Flange
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
Origin	West Europe / Japan / Indian / USA / Korean
Test Certificates	Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report
Specialized manufacturer of	ASTM A350 LF2 Blind Flanges, ASTM A350 LF2 Table Flanges, ASTM A350 LF2 Weld Neck Flanges, ASTM A350 LF2 Threaded Flanges, ASTM A350 LF2 Slip-On Flanges, ASTM A350 LF2 Socketweld Flanges, ASTM A350 LF2 Plate Flanges, ASTM A350 LF2 Loose Flanges, ASTM A350 LF2 Orifice Flanges. ASTM A350 LF2 AS 4087 Water Flanges, ASTM A350 LF2 Lap Joint Flanges are available in class 150, 300, 600, 900, 1500 and 2500.
Key markets and industries for ASTM A350 LF2 Flanges	Bitumen upgraders Heavy oil refineries Nuclear power (mostly seamless) Petrochemicals and acids
Reason to choose ASTM A350 LF2 Pipe Flanges, Key properties	Depending on alloy, highly resistant to highest temperatures (Inconel), corrosion and acids (Monel, Hastelloy). High price restrains use to applications where other metals would fail.

ASTM A105 Flange pressure rating

Temperature (F°)	150#	300#	400#	600#	900#	1500#	2500#
< 100	285	740	985	1480	2220	3705	6170
200	260	680	905	1360	2035	3395	5655
300	230	655	870	1310	1965	3270	5450
400	200	635	845	1265	1900	3170	5280
500	170	605	805	1205	1810	3015	5025
600	140	570	755	1135	1705	2840	4730
650	125	550	730	1100	1650	2745	4575
700	110	530	710	1060	1590	2655	4425
750	95	505	675	1015	1520	2535	4230
800	80	410	550	825	1235	2055	3430
850	65	320	425	640	955	1595	2655
900	50	230	305	460	690	1150	1915
950	35	135	185	275	410	685	1145
1000	20	85	115	170	255	430	715
Hydrostatic Test Pressure (psig)	450	1125	1500	2225	3350	5575	9275

ASTM A105 Flange standard

ANSI B 16.5, ANSI B16.45, JIS B2220, DIN2633, ASME, ASTM, JIS , DIN , EN, etc.

ASTM A105 Flange material

Looking for Carbon Steel Flanges manufacturers in India? Best price of MSS SP-44 CS Plate Flanges in Mumbai

Q235, 20#, Q345A105, ST37.0, ST35.8, St37.2, St35.4/8, St42, St45, St52, St52.4STP G38,STP G42,STPT42, STB42, STS42, STPT49, STS49

ASTM A105 Flange properties

Chemical Composition Requirements of ASTM A105

Element	Composition,%
Carbon (C)	0.35max
Manganese (Mn)	0.60–1.05
Phosphorus (P)	0.035max
Sulfur (S)	0.040max
Silicon (Si)	0.10–0.35
Copper (Cu)	0.40max
Nickel (Ni)	0.40max
Chromium (Cr)	0.30max
Molybdenum (Mo)	0.12max
Vanadium (V)	0.08max

Mechanical Properties of ASTM A105

Mechanical Properties	Requirements
Tensile strength,min,psi [MPa]	70000 [485]
Yield strength,min,psi [MPa]	36000 [250]
Elongation, min, %	30
Reductionofarea,min,%	30
Hardness,HB,max	187

ASTM A105 Flange weight

Carbon Steel Forged & Plate Flangesas per ASME B16.5 dimensions in Class 150 to 2500

CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
150 lb	½	1	1	2	1	2	2
	¾	2	2	2	2	2	2
	1	2	2	2	2	2	3
	1¼	3	3	3	3	3	3
	1½	3	3	3	3	4	4
	2	5	5	5	5	5	6
	2½	8	8	8	8	7	10
	3	9	9	9	9	9	11.5
	3½	11	12	11	11	13	12
	4	13	13	13	13	17	16.5
	5	15	15	15	15	20	21
	6	19	19	19	19	27	26
	8	30	30	30	30	47	42
	10	43	43	43	43	70	54
	12	64	64	64	64	123	88
	14	90	90	90	105	140	114
	16	106	98	98	140	180	140
	18	130	130	130	160	220	165
	20	165	165	165	195	285	197
	22	185	185	185	245	355	225
	24	220	220	220	275	430	268
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
300 lb	½	2	2	3	2	2	2
	¾	3	3	3	3	3	3
	1	3	3	3	3	4	4
	1¼	4.5	4.5	4	4.5	6	5
	1½	6.5	6.5	6	6.5	7	7
	2	7	7	7	7	8	9
	2½	10	10	10	10	12	12
	3	13	14	13	14.5	16	18
	3½	17	17	17	17	21	20
	4	23.5	24	22	24	28	26.5
	5	29	31	28	28	37	36
	6	39	39	39	39	50	45
	8	58	58	58	58	81	69
	10	81	81	81	91	124	100
	12	115	115	115	140	185	142
	14	165	165	165	190	250	206
	16	210	220	190	234	315	250
	18	253	280	250	305	414	320
	20	315	325	315	375	515	400
	22	370	370	370	435	640	465
	24	490	490	475	550	800	580
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
400 lb	½	2	2	2	2	2	3
	¾	3	3	3	3	3	3.5
	1	3.5	3.5	3.5	3.5	4	4
	1¼	4.5	4.5	4.5	4.5	6	4.5
	1½	6.5	6.5	6.5	6.5	8	8
	2	8	8	8	8	10	10
	2½	12	12	12	11	15	14
	3	15	15	15	14	20	18
	3½	21	21	21	20	29	26
	4	26	26	26	25	33	35
	5	31	31	31	29	44	43
	6	44	44	44	42	61	57
	8	67	67	67	64	100	89
	10	91	91	91	110	155	125
	12	130	130	130	152	226	175
	14	191	191	191	210	310	233
	16	253	253	253	280	398	295
	18	310	310	310	345	502	360
	20	378	378	378	420	621	445
	22	405	405	405	455	720	505
	24	539	539	539	615	936	640
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
600 lb	½	2	2	2	2	3	3
	¾	3	3	3	3	4	4
	1	4	4	4	4	4	4
	1¼	5	5	5	5	6	6
	1½	7	7	7	7	8	8
	2	9	9	9	9	10	12
	2½	13	13	13	12	15	18
	3	16	16	16	15	20	23
	3½	21	21	21	20	29	26
	4	37	37	37	36	41	42
	5	63	63	63	63	68	68
	6	80	80	80	78	86	81
	8	115	115	115	112	140	120
	10	177	177	177	195	231	190
	12	215	215	215	240	295	226
	14	259	259	259	290	378	347
	16	366	366	366	400	527	481
	18	476	476	476	469	665	555
	20	612	612	612	604	855	690
	22	590	590	590	670	1000	720
	24	876	876	876	866	1250	977
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
900 lb	½	6	6	6	6	4	7
	¾	6	6	6	6	6	7
	1	7.5	7.5	7.5	7.5	9	8.5
	1¼	10	10	10	10	10	10
	1½	14	14	14	14	14	14
	2	22	22	22	21	25	24
	2½	31	31	31	25	32	31
	3	36	36	36	29	35	36
	4	53	53	53	51	54	53
	5	83	83	83	81	87	86
	6	110	110	110	105	115	110
	8	172	172	172	190	200	187
	10	245	245	245	277	290	268
	12	326	326	326	371	415	372
	14	400	400	400	415	520	562
	16	459	459	459	488	619	685
	18	647	647	647	670	880	924
	20	792	792	792	868	1107	1164
	24	1480	1480	1480	1659	2099	2107
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
1500 lb	½	6	6	6	6	4	7
	¾	6	6	6	6	6	7
	1	8	8	8	8	9	9
	1¼	10	10	10	10	10	10
	1½	14	14	14	14	14	14
	2	25	25	25	25	25	25
	2½	36	36	36	35	35	36
	3	48	48	48	47	48	48
	4	73	73	73	75	73	73
	5	132	132	132	140	140	132
	6	165	165	165	170	160	165
	8	260	260	260	286	302	275
	10	436	436	436	485	510	455
	12	667	667	667	749	775	690
	14	940	940	940	890	975	940
	16	1250	1250	1250	1250	1300	1250
	18	1625	1625	1625	1475	1750	1625
	20	2050	2050	2050	1775	2225	2050
	24	2825	2825	2825	2825	3625	3325
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
2500 lb	½	….	7	….	7	7	8
	¾	….	9	….	8	10	9
	1	….	12	….	12	12	13
	1¼	….	18	….	17	18	20
	1½	….	25	….	24	25	28
	2	….	38	….	37	39	42
	2½	….	55	….	53	56	52
	3	….	83	….	80	86	94
	4	….	127	….	122	133	146
	5	….	210	….	204	223	244
	6	….	323	….	314	345	378
	8	….	485	….	471	533	576
	10	….	925	….	897	1025	1068
	12	….	1300	….	1262	1464	1608

ASTM A105 150 Flange dimensions

ASTM A105 Forged Steel 150# Lap-Joint Flanges Dimensions

Nominal Size	Outside Diameter (OD)	Bore Diameter (B)	No. of Bolt Holes	Bolt Hole Diam.	Bolt Circle (BC)	Thickness (T)	Hub Length (L)	Hub Diam. (H)	Lap Radius ( R )	Approx. Weight (lbs)
1	4.25	1.38	4	0.625	3.13	0.563	0.688	1.938	0.13	2
1 1/4	4.68	1.72	4	0.625	3.50	0.625	0.813	2.312	0.19	3
1 1/2	5.00	1.97	4	0.625	3.88	0.688	0.875	2.563	0.25	3
2	6.00	2.46	4	0.750	4.75	0.750	1.000	3.063	0.31	5
2 1/2	7.00	2.97	4	0.750	5.50	0.875	1.125	3.563	0.31	7
3	7.50	3.60	4	0.750	6.00	0.938	1.188	4.250	0.38	8
3 1/2	8.50	4.10	8	0.750	7.00	0.938	1.250	4.812	0.38	11
4	9.00	4.60	8	0.750	7.50	0.938	1.312	5.312	0.44	13
5	10.00	5.69	8	0.875	8.50	0.938	1.438	6.438	0.44	15
6	11.00	6.75	8	0.875	9.50	1.000	1.562	7.562	0.50	18
8	13.50	8.75	8	0.875	11.75	1.125	1.750	9.688	0.50	30
10	16.00	10.92	12	1.000	14.25	1.188	1.938	12.000	0.50	42
12	19.00	12.92	12	1.000	17.00	1.250	2.188	14.375	0.50	64
14	21.00	14.19	12	1.125	18.75	1.375	2.250	15.750	0.50	90
16	23.50	16.19	16	1.125	21.25	1.438	2.500	18.000	0.50	98
18	25.00	18.20	16	1.250	22.75	1.562	2.688	19.875	0.50	125
20	27.50	20.25	20	1.250	25.00	1.688	2.875	22.000	0.50	160
24	32.00	24.25	20	1.375	29.50	1.875	3.250	26.125	0.50	212
30**	38.75	30.25	28	1.375	36.00	2.125	3.500	32.750	0.50	305
36**	46.00	36.25	32	1.625	42.75	2.375	3.750	39.250	0.50	440

ASTM A105 Blind Flange

Name: RF Carbon Steel Blind Flange.

Type: Blind Flange.

Materials: ASTM A105, Carbon Steel.

Face: RF.

Standards: ASME B16.9, ANSI B16.5.

Pressure: 600LB (PN100).

ø	D	b	g	k	Holes	l	Kg.
1/2"	88,9	11,1	34,9	60,3	4	15,9	0,400
3/4"	98,4	12,7	42,9	69,8	4	15,9	0,700
1"	107,9	14,3	50,8	79,4	4	15,9	0,900
1 1/4"	117,5	15,9	63,5	88,9	4	15,9	1,300
1 1/2"	127,0	17,5	73,0	98,4	4	15,9	1,600
2"	152,4	19,0	92,1	120,6	4	19,0	2,600
2 1/2"	177,8	22,2	104,8	139,4	4	19,0	4,100
3"	190,5	23,8	127,0	152,4	4	19,0	5,000
3 1/2"	215,9	23,8	139,7	177,8	8	19,0	6,400
4"	228,6	23,8	157,2	190,5	8	19,0	7,100
5"	254,0	23,8	185,7	215,9	8	22,2	9,000
6"	279,4	25,4	215,9	241,3	8	22,2	11,800
8"	342,9	28,6	269,9	298,4	8	22,2	21,000
10"	406,4	30,2	323,4	361,9	12	25,4	30,000
12"	482,6	31,7	381,0	431,8	12	25,4	45,000
14"	533,4	34,9	412,7	476,2	12	28,6	59,000
16"	596,9	36,5	469,9	539,9	16	28,6	79,000
18"	635,0	39,7	533,4	577,8	16	31,7	97,000
20"	698,5	42,9	584,2	635,0	20	31,7	124,000
22"	749,3	46,0	641,2	692,1	20	34,9	151,000
24"	812,8	47,6	692,1	749,3	20	34,9	188,000

ASTM A105 Weld Neck Flange

Materials: ASTM A105
Standards: API, ANSI, BS, JIS, UNI, MSS and SP
Pressure: ANSI class 150 to 2,500
Size: 1/2 to 56 inches (DN15 to DN1,400mm)
Used in: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.

ASTM A105 Slip on Flange

ASTM A105 Slip on Flange Manufacturer Landee Supplies ASTM A105 Slip on Flanges, ANSI class 150 to 2,500 SO Flange meets API, ANSI, BS, JIS, UNI, MSS, SP Standards.

Type: Slip-on Flange
Materials: ASTM A105
Standards: API, ANSI, BS, JIS, UNI, MSS and SP
Pressure: ANSI class 150 to 2,500
Size range: 1/2 to 56 inches (DN15 to DN1,400mm)
Used in: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.

ASTM A105 Class 300 Flange

ANSI B16.5 CLASS 300 FORGED FLANGES

(a)- Bolt hole diameter 1/8 in. larger than bolt diameter.
(b)- Standard bore dimensions provided. See bore chart for other wall thicknesses.
(c)- This dimension is commonly associated with "true" lap joints. Industry standard is to make to the slip on length through the hub.

ASTM A350 LF2 Flanges

ASTM A350 LF2 Flanges Grade: ASTM A350 LF2
ASTM A350 LF2 Flanges Size: ½" to 48"
ASTM A350 LF2 Flanges Standard: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, API, EN Flanges, MSSP, NACE, etc.
ASTM A350 LF2 Flanges Type: Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, etc.

ASTM A350 LF2 Flanges Class/ Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

A350 LF2 Flange dimensions

ASTM A350 LF2 Flanges Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Carbon Steel Flanges Price List

Description	Size	Aprox. Wt/Unit	FOB INR	CIF INR	FOB USD	CIF USD	FOB STGP	CIF STGP	FOB EURO$	CIF EURO$
SORF FLANGES ASTM A105 B16.5 150# Price	15mm	0.49	90.05	97.88	1.364	1.483	0.919	0.999	1.637	1.780
SORF FLANGES ASTM A105 B16.5 150# Price	20mm	0.61	108.68	118.13	1.647	1.790	1.109	1.205	1.976	2.148
SORF FLANGES ASTM A105 B16.5 150# Price	25mm	0.90	122.65	133.31	1.858	2.020	1.252	1.360	2.230	2.424
SORF FLANGES ASTM A105 B16.5 150# Price	32mm	1.13	178.54	194.06	2.705	2.940	1.822	1.980	3.246	3.528
SORF FLANGES ASTM A105 B16.5 150# Price	40mm	1.48	189.41	205.88	2.870	3.119	1.933	2.101	3.444	3.743
SORF FLANGES ASTM A105 B16.5 150# Price	50mm	2.37	248.40	270.00	3.764	4.091	2.535	2.755	4.516	4.909
SORF FLANGES ASTM A105 B16.5 150# Price	65mm	3.60	457.99	497.81	6.939	7.543	4.673	5.080	8.327	9.051
SORF FLANGES ASTM A105 B16.5 150# Price	80MM	4.10	481.28	523.13	7.292	7.926	4.911	5.338	8.750	9.511
SORF FLANGES ASTM A105 B16.5 150# Price	100mm	6.04	659.81	717.19	9.997	10.866	6.733	7.318	11.997	13.040
SORF FLANGES ASTM A105 B16.5 150# Price	125mm	6.53	884.93	961.88	13.408	14.574	9.030	9.815	16.090	17.489
SORF FLANGES ASTM A105 B16.5 150# Price	150mm	7.78	1161.27	1262.25	17.595	19.125	11.850	12.880	21.114	22.950
SORF FLANGES ASTM A105 B16.5 150# Price	200mm	12.98	1637.89	1780.31	24.816	26.974	16.713	18.166	29.780	32.369
SORF FLANGES ASTM A105 B16.5 150# Price	250mm	17.96	2716.88	2953.13	41.165	44.744	27.723	30.134	49.398	53.693
SORF FLANGES ASTM A105 B16.5 150# Price	300mm	29.06	3958.88	4303.13	59.983	65.199	40.397	43.909	71.980	78.239
SORF FLANGES ASTM A105 B16.5 150# Price	350mm	36.96	6210.00	6750.00	94.091	102.273	63.367	68.878	112.909	122.727
SORF FLANGES ASTM A105 B16.5 150# Price	400mm	47.28	8694.00	9450.00	131.727	143.182	88.714	96.429	158.073	171.818
SORF FLANGES ASTM A105 B16.5 150# Price	450mm	52.20	9315.00	10125.00	141.136	153.409	95.051	103.316	169.364	184.091
SORF FLANGES ASTM A105 B16.5 150# Price	500mm	68.78	12420.00	13500.00	188.182	204.545	126.735	137.755	225.818	245.455
SORF FLANGES ASTM A105 B16.5 150# Price	600mm	95.03	18630.00	20250.00	282.273	306.818	190.102	206.633	338.727	368.182