Duplex 2205 Pipe

SA 789 UNS S32205 Seamless Tube and UNS S31803 Duplex Pipe supplier in Mumbai

Duplex is made up of 2 grades of metal and is used worldwide. The Duplex 2205 Pipe is made with a high concentration of nickel, chromium, and ferrous in their composition. These pipes are resistant to corrosion and erosion in different mediums. The products from this grade are neither fully austenitic nor ferritic. Duplex 2205 Tube can be easily machined and fabricated. These tubes show excellent resistance against crevice corrosion, sulfide ion cracking, and pitting due to various acids. The duplex stainless steel Pipe is designed with superior strength and enhanced hardness. These pipes possess a minimum tensile strength of 95Ksi and minimum yield strength of 65Ksi. They can be elongated by 15% in different applications. The 22cr Duplex Pipe has a density of 7.8g/cm3 and is manufactured following all international and national standards. These pipes are available in nominal sizes of ½ NB to 12 NB. The Astm A790 Uns S32205 is equivalent to the duplex grade. This grade is produced under the guidance of our experienced staff. It is annealed after the hot-rolling process to give it enhanced hardness. We are the leading Duplex Pipe suppliers in India. Our institution aims at supplying high-quality products through all our outlets across the country. Our experienced workers make use of the latest technology and the best 2205 Pipe Material to produce the best products in the market.

Duplex 2205 Pipe

The Duplex 2205 Seamless Pipe is made from a single piece of steel. This gives it enhanced strength and excellent tolerances in stress-induced environments. They are available in lengths between 4mm to 219mm. A Duplex 2205 Welded Pipe is manufactured by welding pieces of steel either spirally or longitudinally. These pipes are cost-effective and possess a thickness between 0.5mm to 20mm and lengths up to 1219.2mm. The 2205 Duplex Stainless Pipe exhibits magnetic properties in certain environments. These pipes are available in plain, beveled and threaded tubing ends. The 2205 Pipe Sizes are available in single random, double random, and cut lengths. These pipes are produced in rectangular, circular, square, u-lop, and other shapes. In the Astm A790 Uns S31803 grade pipes and tubes can be cold-rolled to give them enhanced properties and good resistances in different systems. They are very versatile in different applications. The 2205 Stainless Steel Pipe is widely used in chemical processing, offshore drilling, oil and gas refining, cooling systems, pollution control equipment, marine environments, etc. Alloy 2205 Pipe has a melting point of 1350 degrees C. These pipes have a wall thickness between 0.3mm to 50mm.

The SA 789 Alloy 2205 Pipe has good performance in caustic environments as well as in high pressure and temperature systems. These pipes can be availed in schedules between sch 5 to sch 160. ASTM A790 Duplex 2205 Pipe are precise and used in sensitive applications. These pipes are highly reliable and can be easily cleaned and maintained for long periods. We are the Duplex Tube suppliers who can customize all our products in different specifications and sizes as per our client’s requirements. If you have any queries or want to get a quote on our products or the Astm A815 Uns S31803 grade contact us.

Check ASME B36.19M Duplex Stainless Steel Pipe id o.d. chart in inches, Schedules & Specification


Duplex 2205 Pipe Specification

Exporter, supplier, stockist and trader of Duplex 2205 Tube in various shape and types such as Welded, Coiled, Boiler, Heat Exchanger Tubes in U Bend & Straight

Pipe Standard AISI, DIN, EN, GB, JIS, ASTM, ASME
Seamless Pipe Outer Diameter 6.00 MM OD up - 250 MM OD, Sizes up to 12 Inch NB
Welded Pipes sizes 5.0 MM - 1219.2 MM
EFW Pipes size 5.0 MM to 1219.2 MM
Pipe Thickness 0.3MM to 50 MM
Size 3.35 - 101.6 MM OD, 15 - 150 NB Inch
Size 6.35 - 152 MM outer diameter
wall thickness 0.020 inch to 0.220inch
Schedule Schedule 5, 10, 40, 80, 80S, 160, XXS, XS Duplex 2205 Pipe Supplier
Finish Annealedand Pickled, Polished, Mirror finish, Bright and Annealed, MF, NO.1, NO.4, 2B, BA, HL, 8K, etc
Form Straight Pipes, Round, Rectangular, Hydraulic, Square, Coiled, U Shape, Hollow etc.
Pipe Length Single Random, Double Random, Standard & Cut length
End Plain End, Beveled End, Treaded Pipe.
Tubes Types Alloy 2205 Seamless, ERW, EFW, Welded, Fabricated, CDW, DOM, CEW Pipes
Pipe Marking All Pipes are marked as follows: Supplier or Manufacturer’s Name, Grade, Standard, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Boiler, Heatexchanger, Oil Tube, Gas Tube and Fluid Tube

Duplex 2205 Seamless Pipe Chemical Structure

Carbon Nitrogen Phosphorus Silicon Manganese Molybdenum Iron Chromium Sulfur Nickel
1.0 0.03 0.02 2.0 3.0 - 3.5 22.0 - 23.0 0.03 4.5 - 6.5 0.14 - 0.2 Bal

22cr Duplex Pipe Mechanical Strength

Find you size in our online inventory of Duplex 2205 Seamless Pipe and SA 789 UNS S31803 Condenser Tube in Mumbai at competitive pricing
Density Melting Point Yield Strength Tensile Strength Elongation
7.8 g/cm3 1350 °C Psi - 80000, MPa - 550 Psi - 116000, MPa - 800 15 %

Duplex 2205 Welded Pipe Equivalent

STANDARD WERKSTOFF NR. UNS
Duplex 2205 Pipe 1.4462 / 1.4462 S31803 / S32205

2205 Duplex Stainless Pipe Sizes

ASTM A790 UNS S32205 Heat Exchanger Tube and Alloy 2205 Pipe available in all standard and custom cuts, Compare our price with other Duplex Pipe suppliers in India
Pipe Outer Diameter in mm Pipe Wall Thickness in mm inches Schedule Kg/m
13.72 2.24 1/4 40S 0.64
13.72 3.02 1/4 80S 0.81
17.15 1.65 3/8 10S 0.64
13.72 1.65 1/4 10S 0.50
17.15 2.31 3/8 40S 0.86
21.34 2.11 1/2 10S 1.02
21.34 2.77 1/2 40S 1.29
17.15 3.20 3/8 80S 1.12
21.34 3.73 1/2 80S 1.65
26.67 2.11 3/4 10S 1.30
26.67 3.91 3/4 80S 2.23
33.40 2.77 1 10S 2.13
26.67 2.87 3/4 40S 1.71
33.40 3.38 1 40S 2.54
33.40 4.55 1 80S 3.29
33.40 6.352) 1 160 4.30
42.16 2.77 10S 2.73
42.16 3.56 40S 3.44
42.16 4.85 80S 4.53
42.16 6.352) 160 5.69
48.26 2.77 10S 3.16
48.26 3.68 40S 4.11
48.26 5.08 80S 5.49
60.33 2.77 2 10S 3.99
60.33 3.91 2 40S 5.52
60.33 5.54 2 80S 7.60
60.33 8.742) 2 160 11.29
73.03 3.05 10S 5.35
73.03 5.16 40S 8.77
73.03 7.01 80S 11.59
88.90 3.05 3 10S 6.56
88.90 5.49 3 40S 11.47
88.90 7.62 3 80S 15.51
88.90 11.132) 3 160 21.67
101.60 3.05 10S 7.53
101.60 5.74 40S 13.78
101.60 8.08 80S 18.92
114.30 3.05 4 10S 8.50
114.30 6.02 4 40S 16.32
114.30 8.56 4 80S 22.67
114.30 13.492) 4 160 34.05
141.30 6.55 5 40S 22.10
141.30 9.53 5 80S 31.44
141.30 15.882) 5 160 49.87
168.28 3.4 6 10S 14.04
168.28 7.11 6 40S 28.69
168.28 10.97 6 80S 43.21
168.28 14.27 6 120 54.75
168.28 18.262) 6 160 68.59
219.08 8.18 8 40S 43.20
219.08 12.7 8 80S 65.63
219.08 18.23 8 120 91.30
219.08 23.012) 8 160 112.97

ASTM A790 Duplex 2205 Pipe Wall Thickness

Types Outer diameter Wall thickness Length
Nominal bore Sizes (in stock) 1/8 Inch ~ 8 Inch Schedule 5 / Schedule 10 / Schedule 40 / Schedule 80 / Schedule 160 6 M
Duplex 2205 Seamless Pipe (Custom Sizes) 5.0mm ~ 203.2mm As per Customer's requirement
Duplex 2205 Welded Pipe (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm 6 M

2205 Stainless Steel Pipe Schedule Chart

1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
Pipes, SCH 40, 80 Pipes, SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
Pipes, SCH 10, 40, 80 Pipes, SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
Pipes, SCH 10, 40, 80 Pipes, SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
Pipes, SCH 5, 10, 40, 80, 160, XXH Pipes, SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
Pipes, SCH 10, 40, 80, 160, XXH Pipes, SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
Pipes, SCH 5, 10, 40, 80, 160, XXH Pipes, SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
Pipes, SCH 10, 40, 80, 160, XXH Pipes, SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
Pipes, SCH 10, 40, 80, 160, XXH Pipes, SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
Pipes, SCH 10, 40, 80, 160, XXH 2205 Pipes, SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
2205 Pipes, SCH 10, 40, 80, 160, XXH 2205 Pipes, SCH-40 (.375)
3" IPS( 3.500" O.D.) 2205 Pipes, SCH 5, 10, 40, 80, 160, XXH

SA 789 Alloy 2205 Pipe Pressure Rating

Pipe Outer diameter
(In.)
Wall Thickness Of Pipe (Inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (Psig)
1/8 7900 10100            
1/4 3700 4800 7000 9500        
5/16   3700 5400 7300        
3/8   3100 4400 6100        
1/2   2300 3200 4400        
3/4     2200 3000 4000 4600    
1       2200 2900 3400 3900 4300

Duplex 2205 Tube Weight Chart

NPS Outside diameter Wall thickness (WT) weights weight
Inch MM Inch MM Schedule kg / M Lb /feer
1/2 0.840 21 0.109 2.769 40 STD 1.268 0.851
1 1/4 1.660 42 0.140 3.556 40 STD 3.385 2.273
0.147 3.734 80 STD 1.621 1.088
0.154 3.912 80 STD 2.195 1.474
1 1.315 33 0.133 3.378 40 STD 2.501 1.679
3/4 1.050 27 0.113 2.870 40 STD 1.684 1.131
0.179 4.547 80 STD 3.325 2.172
0.191 4.851 80 STD 4.464 2.997
1 1/2 1.900 48 0.145 3.683 40 STD 4.048 2.718
0.200 5.080 80 STD 5.409 3.361
2 2.375 60 0.154 3.912 40 STD 5.441 3.653
0.218 5.537 80 STD 7.480 5.022
2 1/2 2.875 73 0.203 5.516 40 STD 8.629 5.793
0.276 7.010 80 STD 11.411 7.661
3 3.500 89 0.216 5.486 40 STD 11.284 7.576
4 4.500 114 0.237 6.020 16.073 10.790
0.337 8.560 22.318 14.983
6 6.625 168 0.188 4.775 19.252 12.924
0.203 5.516 20.739 13.923
0.219 5.563 22.318 14.983
0.250 6.350 25.354 17.021
0.300 7.620 80 STD 15.272 10.253
0.280 7.112 40 STD 58.263 18.974
0.312 7.925 31.334 21.036
0.375 9.525 37.285 25.031
0.432 10.973 80 XHY 42.561 28.573
0.500 12.700 48.719 32.708
8 8.625 219 0.188 4.775 25.233 16.940
0.219 5.563 29.286 19.661
0.250 6.350 20 33.308 22.361
0.277 7.036 30 36.786 24.696
0.322 8.179 40 42.352 28.554
0.375 9.525 49.216 33.041
0.406 10.312 60 53.085 35.638
0.203 5.156 27.198 18.259
0.500 12.700 80 XHY 64.627 43.388
10 10.750 273 0.188 4.775 31.588 21.207
0.219 5.563 36.689 24.631
0.250 6.350 20 41.759 28.035
0.307 7.798 30 51.002 34.240
0.344 8.738 56.946 38.231
0.365 9.271 40 STD 63.301 40.483
0.438 11.125 71.852 48.238
0.500 12.700 60 XHY 81.530 54.735
0.594 15.088 80 95.969 64.429
12 12.750 324 0.188 4.775 37.570 25.222
0.219 5.563 43.657 29.309
0.250 6.350 49.713 33.375
0.281 7.137 55.739 37.420
0.312 7.925 61.735 41.445
0.375 9.525 73.824 49.562
0.406 10.312 79.727 53.525
0.500 12.700 97.438 65.415
0.562 14.275 108.966 73.154
14 14.000 356 0.188 4.775 41.308 27.732
0.219 5.563 48.012 32.233
0.250 6.350 20 54.685 36.713
0.281 7.137 61.327 41.172
0.312 7.925 67.939 45.611
0.375 9.525 STD 81.281 54.568
0.438 11.125 40 94.498 63.441
0.500 12.700 XHY 107.381 72.090
0.625 15.875 132.983 89.278
16” 16.000 406 0.188 4.775 47.290 21.748
0.219 5.563 54.980 36.910
0.250 6.350 10 62.639 42.053
0.281 7.137 70.268 47.174
0.312 7.925 20 77.866 52.275
0.344 8.738 85.677 57.519
0.375 9.525 30 STD 93.213 62.578
0.438 11.125 108.433 72.797
0.500 12.700 40 XHY 123.289 82.770
18 18.000 457 0.219 5.563 61.948 41.588
0.250 6.350 70.593 47.393
0.281 7.137 79.208 53.176
0.312 7.925 20 87.792 58.939
0.375 9.525 STD 105.144 70.588
0.438 11.125 30 122.369 82.152
0.500 12.700 XHY 139.198 93.450
0.562 14.275 40 155.904 104.666
0.625 15.875 172.754 115.978
20 20.000 508 0.250 6.350 78.547 52.733
0.282 7.163 88.458 59.386
0.312 7.925 97.719 65.604
0.375 9.525 20 STD 117.075 78.598
0.438 11.125 136.305 91.508
0.500 12.700 30 XHY 155.106 104.130
0.594 15.088 40 183.378 123.110
0.625 15.875 192.640 129.328
0.688 17.475 211.368 141.901
24 24.000 610 0.250 6.350 94.456 63.413
0.281 7.137 106.029 71.183
0.312 7.925 117.573 18.932
0.375 9.525 20 STD 140.938 64.618
0.438 11.125 164.176 110.219
0.500 12.700 XHY 186.923 125.490
0.625 15.875 232.410 156.028
0.688 17.475 40 255.148 171.293
0.750 19.050 277.401 186.233
30 30.000 762 0.250 6.350 118.318 79.433
0.281 7.137 132.851 89.189
0.312 7.925 10 147.353 98.925
0.375 9.525 STD 176.731 118.648
0.438 11.125 205.983 138.286
0.500 12.700 20 XHY 234.647 157.530
0.625 15.875 30 292.066 196.078
0.688 17.475 320.817 215.380
0.750 19.050 348.988 234.293
36 36.000 914 0.250 6.350 142.180 95.453
0.281 7.137 159.672 107.196
0.312 7.925 10 177.133 118.918
0.375 9.525 STD 215.525 142.678
0.438 11.125 247.790 166.353
0.500 12.700 20 XHY 282.372 198.570
0.625 15.875 351.723 236.128
0.688 17.475 386.487 259.467
0.750 19.050 420.576 282.353
42 42.000 1067 0.312 7.925 206.914 138.911
0.375 9.525 STD 248.319 166.708
0.500 12.700 XHY 33.097 221.610
0.750 19.050 492.163 330.413
48 48.000 1219 0.375 9.525 STD 284.112 190.738
0.438 11.125 331.404 222.487
0.500 12.700 XHY 377.822 253.650
0.750 19.050 563.750 378.473
0.875 22.225 655.969 440.383