EN 10210 S355J2H Seamless Pipe

EN 10219 S355J2H Welded Hollow Section and Cold Formed 1.0576 Steel Rectangular Tube supplier in Mumbai, India

The S355 is a low carbon grade. S355J2H Pipe has a chemical composition of 0.22% of carbon, 0.55% of silicon, 1.6% manganese, 0.03% of phosphorus and sulfur. These pipes are designed with excellent corrosion resistance and can suffice in extreme temperatures. The EN 10210 Tube has excellent dimensional accuracy and superior finish. These tubes are used in the construction of critical structures as they are durable as well as cheap. EN 10210 S355J2H Seamless Pipe is designed with excellent mechanical properties. They possess a tensile strength between 510Mpa to 680Mpa and yield strength of a minimum of 355 Mpa. EN 10210 S355J2H Seamless Tube is a mild steel tube. These tubes are not as strong as full-fledged carbon pipes but possess considerable strength and excellent stress resistance. The S355J2H en 10210 tube is widely used in the transportation of oil, gas, and petroleum in various systems. It is also used in boilers, heat exchangers, and fluid tubes. We are the leading stockist of EN 10210 S355J2H in India. We possess top-quality products, which are available at reasonable rates for all.

EN 10210 S355J2H Seamless Pipe

The S355J2H EN 10219 Welded Pipe is formed by joining pieces of steel together with the help of a fillet weld. These pipes have exceptional performance and are relatively easy to maintain. S355J2H EN 10210 Square Tube possesses good impact and corrosion resistance. These tubes can be employed and work well at low temperatures up to -20 degrees C. Steel Grade S355J2H Hollow section is designed with thicker walls which gives them enhanced hardness and strength. They are made from killed steel, which can be welded very easily. They can be formed by cold or hot rolling processes. The EN 10210-1 S355J2H Cold Formed Hollow Section is made with non-alloys and fine grain steel. These sections are provided with enhanced properties, finish, and improved chemical balance. Cold Formed S355J2H Structural hollow section has excellent dimensions mapped with a controlled corner radius. They can be easily elongated by 22% and still possess excellent workability. EN 10219 S355J2H Welded Hollow Section is produced from traditional welding processes. They don’t require any pre-heating or suffer from post-weld carburization suffered in other grades. All our products including, the EN 10210 S355J2H Steel Pipe, can be customized as per specified chemical make-up and sizes. 

The EN 10219-2 S355J2H Circular Hollow Section can be produced in both cold and hot rolling processes. This section is easy to bend in hot rolled sections. They are used in various structural and mechanical systems. S355J2H Steel CHS Tube possesses uniform mechanic properties, which are stress relieved. These tubes have a wall thickness of 1.8mm to 14.27mm with lengths up to 18000mm. The DIN 17120 S355J2H Square Hollow Section is designed with a uniform grain structure with excellent toughness in its cross-section. It has low corner radii but can be employed to carry heavyweights. EN 10210-2 S355J2H Square Hollow Pipe is available in seamless, welded, and ERW pipes. These pipes possess a wall thickness between 0.5mm to 25mm. The DIN 17121 S355J2H Rectangular Hollow Section is the preferred choice throughout the industry. These pipes are reliable and very easy to use in different applications. EN 10219-1 S355J2H RHS Tube is designed with excellent conductivity and good resistivity. These tubes are available in different sizes as per the requirements of the client. The 1.0576 Steel Rectangular tube along with our other productsare manufactured following all industry standards. This is done using the latest technology and best raw materials to produce the best products. If you have any queries or want to get a quote on our products or the EN 10210 S355J2H, contact us.

Supplies a Large Variety of DIN 17121 S355J2H Rectangular Hollow Section and Hot Rolled S355J2H Steel CHS Tube, Check DIN 17120 S355J2H Square Hollow Section online price in India

EN 10210 S355J2H Seamless Pipe Specification

Distributor & supplier of EN 10210 Tube, RHS, SHS and Hot/ Cold Finish S355J2H Pipe, Check ANSI/ ASME B36.10M S355J2H Structural Hollow Section NPS, Schedules & Specification chart

Size Round Pipes – OD 13.7-1214mm
Square Pipes – 10 X 10 mm – 800 X 800 mm
Rectangular Pipes – 10mm x 20mm – 400 x 800mm
Wall Thickness 1.0mm To 40mm
Length 6 M, 12 M & Custom Size
Type Round, Square, Rectangular
Welded, Seamless, Fabricated, ERW
Surface Finish Shot blasting, Oiled, Black Phosphating, Black, Paint, Mirror, Galvanized, Hairline, Anti Corrosive
Material grades ASTM A500 – Gr.A, Gr.B, Gr.C, Gr.D
SS330, SS400, STK490, C250, C350, C450
EN 10210/EN 10219 – S185, S235JR, S235J0, S355JR, S355J0, S355J2
20#, 45#, 16Mn, 304, 304L, 316, 316L
End Type Plain, Screwed, Bevel, Threaded

S355J2H Pipe Chemical Composition Table

Steel Grade Chemical Composition Limits (%)
C Si Mn P S N
S235JRH 0.17 1.40 0.040 0.040 0.009
S275J2H 0.20 1.50 0.030 0.030
S275J0H 0.20 1.50 0.035 0.035 0.009
S355J0H 0.22 0.55 1.60 0.035 0.035 0.009
S355K2H 0.22 0.55 1.60 0.030 0.030
S355J2H 0.22 0.55 1.60 0.030 0.030

EN 10210 Tube Mechanical Strength

Compare our rates with other S355J2H EN 10219 Welded Pipe and EN 10210 S355J2H Steel Pipe suppliers in India
Steel Grade Mechanical Properties Impact Energy (KV J)
Yield Strength Tensile Strength Elongation Test Temperature At Test Temperature of ℃
-20 0 20
S275J0H 275 410-560 23 27
S235JRH 235 360-510 26 27
S275J2H 275 410-560 23 27
S355J2H 355 510-680 22 27
S355J0H 355 510-680 22 27
S355K2H 355 510-680 22 40

EN 10210 S355J2H Steel Pipe Size chart

1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.) SCH 5, 10, 40, 80, 160, XXH

S355J2H EN 10219 Welded Pipe Heat Treatment

Finding EN 10219-2 S355J2H Circular Hollow Section suppliers who provides MTC as per EN 10204 3.1? Buy S355J2H EN 10210 RHS/ Square Tube in any Gauge and Thickness Range
Hot Forming Heat Treatment
Temperature°C Cooling Type Normalizing 1″ Stress relieving anneal 2″ Cooling Type
 700-750 Air 850-950°C 580-630°C Air