Hastelloy is an austenitic super alloy, which is highly versatile. The Hastelloy C22 Round Bar is made with a chemical concentration of 22% chromium, 14% molybdenum, and 3% tungsten. These tubes are highly resistant to all forms of corrosion. The Hastelloy C22 ASTM B574 Flat Bar is designed with good mechanical properties. They possess a tensile strength of a minimum 690Mpa and yield strength of a minimum 310Mpa. The Hastelloy B574 Hollow Bar is used in applications, which requires it to function in extreme pressure and high temperatures. These bars can be easily elongated by 45% and still possess excellent workability. The ASTM B574 Hastelloy C22 Rod provides protection against various acids and oxidation agents along with several reducing media. They possess a density of about 8.69 g/cm3. Hastelloy Alloy C22 Round Rod is used to provide support to existing structures. These rods have excellent strength and superior electrical conductivity. They can suffice in temperatures up to 1250 degrees F. The Hastelloy C22 Bar is widely used in chemical industries, paper, and pulp production, pollution control, marine applications, waste treatment systems, etc. We are the leading supplier and manufacturer of the Alloy C22 Round Bar. Our mission is to produce and supply high-quality products, which are available at reasonable rates.
The ASTM B574 Alloy N06022 Hex Bar acts as a connector between the center and the bar. They are widely used in pressure valves as a plug to stop excess pressure. These bars are manufactured following all ASTM standards. In the Hastelloy C22 N06022 Hexagon Bars, sizes are available between 6mm to 105mm. They are precisely made for systems and machines, which require pieces of accurate sizes. The 2.4602 Hastelloy C-22 Hot Rolled Bar is formed by processing them at high temperatures. These bars are designed with superior dimensional accuracy and exhibit good strength. The C22 Hastelloy Cold Drawn Bar is highly ductile and possesses a superior surface finish. These enhanced properties make these bars extremely strong and easy to work with. The Hastelloy UNS N06022 Cold Finished Bar due to its ductile properties can be easily annealed and pickled to give them additional protection from corrosion and oxidation mediums. Hastelloy C22 Alloy Forged Round Bars are designed with enhanced strength and excellent mechanical properties. Due to forging, these bars have improved ductility, good fatigue, and impact resistance. This Hastelloy C-22 UNS N06022 Forged Bar has a thickness ranging between 3mm to 12mm. These bars are very easy to maintain and have a long service life. The Alloy C22 Hastelloy Bright Bars are available in different shapes. These bars possess a smooth and shiny finish. They are designed with precise shapes and good tolerances. The Hastelloy C22 UNS N06022 Polished Bar is available in different types of finishes. These bars provide an aesthetic finish to the product. We make use of the latest technology and best Hastelloy C22 B574 Bar Stock while producing all the products within this grade.
The Hastelloy C22 Grade Square Bar is widely used in various industries for manufacturing and general assembly. These bars are available in sizes between 4mm to 100mm. The Haynes Alloy C22 Threaded Bar is used to stabilize various structures in different systems. These bars can also be used to fasten or join two materials together with the help of nuts or screws. Nickel Alloy C22 Triangular Bar are strong structures, which possess a round or a circular cross-section. These bars are very reliable and can work in different environments. The Hastelloy 2.4602 Rectangular Bar is used in various structural and maintenance systems. These bars are available in sizes between 33mm X 30mm to 295mm X 1066mm. The Alloy C22 UNS N06022 can be easily customized in a wide array of chemical make-up and different sizes as per your requirements. If you have any questions or want to know more about our products or the C22 UNS N06022 Spring Steel Bar, contact us.
Hastelloy C22 Material Specification: ASTM B574/ ASME SB574 Inco C22 Round Bar
Grade: Hastelloy, Hastelloy B2 (UNS N10665), Hastelloy X, Hastelloy C-4 (UNS No. N06455), Hastelloy C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000, Hastelloy B-3 (UNS N10675)
Form: Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc.
Size Range: 15NB to 150NB In manufacturing process: Cold drawn/ Extruded
Length: 100 mm To 3000 mm Long & Above
Diameter (Size) : Metric M6 to M48, Inches - 1/4’’ to 2’’
Tolerance : H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients’ requirements
Finish : Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished
Condition : Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Threading
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Specifications |
Hastelloy C22 Round bar |
Diameter: 3mm~800mm |
|---|---|---|
Hastelloy C22 Angle bar |
Size: 3mm*20mm*20mm~12mm*100mm*100mm |
|
Hastelloy C22 Square bar |
Size: 4mm*4mm~100mm*100mm |
|
Hastelloy C22 Flat bar |
Thickness: 2mm~100mm |
|
Width: 10mm~500mm |
||
Hastelloy C22 Hexagonal |
Size: 2mm~100mm |
ASTM B574 UNS N06022 Round Bar
Hastelloy C22 Round Bar, Alloy C22 Round Bar
ASTM B574 UNS N06022 Flat Bar
Hastelloy C22 Flat Bar, Alloy C22 Flat Bar
ASTM B574 UNS N06022 Square Bar
Hastelloy C22 Square Bar, Alloy C22 Square Bar
ASTM B574 UNS N06022 Round Corner Square Bar
Hastelloy C22 Round Corner Square Bar, Alloy C22 Round Corner Square Bar
ASTM B574 UNS N06022 PSQ Bar (PUMP SHAFT QUALITY BAR)
Hastelloy C22 PSQ Bar (PUMP SHAFT QUALITY BAR), Alloy C22 PSQ Bar
ASTM B574 UNS N06022 Hexagonal Bar / Hexagon Bar
Hastelloy C22 Hexagon Bar, Alloy C22 Hexagon Bar
ASTM B574 UNS N06022 Flat Block Bar
Hastelloy C22 Flat Block Bar, Alloy C22 Flat Block Bar
ASTM B574 UNS N06022 Rectangular Bar
Hastelloy C22 Rectangular Bar, Alloy C22 Rectangular Bar
ASTM B574 UNS N06022 Hollow Ring Bar
Hastelloy C22 Hollow Ring Bar, Alloy C22 Hollow Ring Bar
ASTM B574 UNS N06022 Bright Round Bar
Hastelloy C22 Bright Round Bar, Alloy C22 Bright Round Bar
ASTM B574 UNS N06022 Forged Round Bar
Hastelloy C22 Forged Round Bar, Alloy C22 Forged Round Bar
ASTM B574 UNS N06022 Cold Drawn Bar
Hastelloy C22 Cold Drawn Bar, Alloy C22 Cold Drawn Bar
ASTM B574 UNS N06022 Hollow Bar
Hastelloy C22 Hollow Bar, Alloy C22 Hollow Bar
ASTM B574 UNS N06022 Circular Bar
Hastelloy C22 Circular Bar, Alloy C22 Circular Bar
ASTM B574 UNS N06022 Threaded Bar
Hastelloy C22 Threaded Bar, Alloy C22 Threaded Bar
ASTM B574 UNS N06022 Angle Bar
Hastelloy C22 Angle Bar, Alloy C22 Angle Bar
ASTM B574 UNS N06022 Forged Bar
Hastelloy C22 Forged Bar, Alloy C22 Forged Bar
ASTM B574 UNS N06022 Triangle Bar
Hastelloy C22 Triangle Bar, Alloy C22 Triangle Bar
ASTM B574 UNS N06022 Welding Rod
Hastelloy C22 Welding Rod, Alloy C22 Welding Rod
ASTM B574 UNS N06022 Threaded Rod
Hastelloy C22 Threaded Rod, Alloy C22 Threaded Rod
ASTM B574 UNS N06022 Filler Rod
Hastelloy C22 Filler Rod, Alloy C22 Filler Rod
Hastelloy C22 Rod
Hastelloy C22 Forged Round Bars Capabilities: The maximum length for forged round bars and hex bars is 420 inches, in the ASTM B574 Hastelloy C22 Bars with a maximum weight of 20,000 pounds, 220 inches.
Hastelloy C22 Flat Bars Capabilities: The maximum length for ASTM B574 Alloy C22 flat bars is 220 inches in the ASTM B574 Hastelloy C22 Bars with a maximum weight of 15,000 pounds.
Hastelloy C22 Square Bars Capabilities: The maximum length for ASTM B574 Alloy C22 square bars is 220 inches in the ASTM B574 Hastelloy C22 Bars with a maximum weight of 15,000 pounds
Standard: ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5,DIN 17440,GB/T 1220
| STANDARD | HASTALLOY C 22 |
|---|---|
| UNS | N06022 |
| WERKSTOFF NR. | 2.4602 |
| EN | NiCr21Mo14W |
| JIS | NW 6022 |
| DENSITY (G/CM 3) | 8.61 |
| DENSITY (LB/IN 3) | 0.311 |
| MELTING POINT (°C) | 1351 – 1387 |
| MELTING POINT (°F) | 2464 – 2529 |
| ELEMENT | HASTELLOY C 22 |
|---|---|
| NI | 50.015 min* |
| MO | 12.50 – 14.50 |
| CR | 20.00 – 22.50 |
| FE | 2.00 – 6.00 |
| W | 2.50 – 3.50 |
| CO | 2.50 max |
| C | 0.015 max |
| SI | 0.08 max |
| MN | 0.50 max |
| V | 0.35 max |
| P | 0.02 max |
| S | 0.02 max |
| CONDITION | TENSILE STRENGTH | YEILD STRENGTH | ELOGNATION |
|---|---|---|---|
| ANNEALED | 100 (690) | 45 (310) | 45 |
| Marking | Product and Designation | |||||
|---|---|---|---|---|---|---|
| Corrosion Resistant Fittings | ASME Pressure Fittings | Alloy | UNS Designation | Pipe or Tube | Plate, Sheet, strip | Bar Forging, and Forging Stock |
CRHC 22 |
WPHC 22 |
Low C-Ni-Mo-Cr |
N06022 |
B619, B622, B626 |
B575 |
B574, B564,B462, B 472 |
