Inconel 625

Nickel Alloy 625 material supplier in India

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum. The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments. These alloys possess superior ductility and excellent formability. They can be welded easily and resist post-weld carburization or graining. The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness. They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi. Apart from this, they can be easily elongated by 30% and still possess excellent workability. These alloys are widely used in chemical processing, pollution control, evaporator, nuclear reactors, marine industries, and so on. We are the leading Inconel 625 suppliers in India. We thrive to supply high-quality products throughout the country at the most reasonable prices. 

Inconel 625

The Inconel Alloy 625 is immune against chloride stress cracking. These alloys can suffice in high pressures and extreme temperatures. They can be either cold or hot rolled in different shapes to suit various applications. The Inconel 625 Price per kg in India is available between Rs 3000 to Rs 3300. The pricing range depends on the thickness, size of the material of your choosing. The Inconel 625 Price is validated by the fact that our products are very easy to maintain and have a long service life. Visit our outlets to get a complete quote on the pricing of this grade as well as our other products.

We are the Alloy 625 suppliers who can customize all our products in different chemical make-up, shapes, and sizes as per your requirements. All our products are manufactured under the strict guidance of our experienced workers. They make use of the best raw material and cutting-edge technology to produce the best products in the market. If you have any queries or want to know in detail about our products or their pricing, contact us for more information.

Check Inconel Alloy 625 Products Price per kg in Mumbai


Available Inconel 625 Products And Specifications

View Inconel 625 Equivalent, Melting Point, Chemical Composition, Mechanical Properties and Hardness

Rod, Bar, Wire and Forging Stock - ASTM B 446/ASME SB 446 (Rod & Bar), ASTM B 564/ASME SB 564 (Forgings), SAE/AMS 5666 (Bar, Forgings, & Rings), SAE/AMS 5837 (Wire), ISO 9723 (Rod & Bar), ISO 9724 (Wire), ISO 9725 (Forgings), VdTÜV 499 (Rod & Bar), BS 3076NA21 (Rod & Bar), EN 10095 (Rod, Bar, & Sections), DIN 17752 (Rod & Bar), ASME Code Case 1935 (Rod, Bar, & Forgings), DIN 17754 (forgings), DIN 17753 (Wire).

Plate, Sheet and Strip - ASTM B 443/ASTM SB 443 (Plate, Sheet & Strip), SAE/AMS 5599 & 5869 & MAM 5599 (Plate, Sheet & Strip), ISO 6208 (Plate, Sheet & Strip), VdTÜV 499 (Plate, Sheet & Strip), BS 3072NA21 (Plate & Sheet), EN 10095 (Plate, Sheet & Strip), DIN 17750 (Plate, Sheet & Strip), ASME Code Case 1935.

Pipe & Tube - ASTM B 444/B 829 & ASME SB 444/SB 829 (Seamless Pipe & Tube), ASTM B704/B 751 & ASME SB 704/SB 751 (Welded Tube), ASTM B705/B 775 & ASME SB 705/SB 775 (Welded Pipe), ISO 6207 (Tube), SAE/AMS 5581 (Seamless & Welded Tube), VdTÜV 499 (Tube), BS 3074NA21 (Seamless Pipe & Tube), DIN 17751 (Tube), ASME Code Case 1935.

Other Product Forms - ASTM B 366/ASME SB 366 (Fittings), ISO 4955A (Heat Resisting Steels & Alloys), DIN 17744 (Chemical composition of all product forms). UNS N06625, AMS 5599, AMS 5666, ASTM B 443 Gr 1, ASTM B 446, ASME SB 443 Gr 1, EN 2.4856, EN 10204, EMS95377, PWA-LCS, GE-S400/1000, RR SABRe Edition 2, DFARS Compliant.

Inconel 625 Tubing Suppliers

Inconel 625 Wire

Inconel 625 Wire

Inconel 625 Wire

Inconel 625 Common Trade Names

Material

Equivalent Material

ALLOY 625 (61 Ni/22 Cr/9 Mo)
  • Inconel Alloy 625 (® Special Metals)
  • Haynes 625 (® Haynes International)
  • Inconel 625
  • Nicrofer 6020
  • Nickelvac 625
  • Chronic 625
  • Altemp 625
  • ATI 625 (™ Allegheny Technologies)
  • 625DDQ
  • 625 LCF (® Special Metals)

ALLOY 625 Equivalent ASTM

American Society for Testing and Materials (ASTM)

  • ASTM B444 (Pipe Seamless)
  • ASTM B705 (Pipe Welded)
  • ASTM B444 (Tube Seamless)
  • ASTM B704 (Tube Welded)
  • ASTM B443 & ASTM B906 (Sheet/ Plate / Strips / Coils)
  • ASTM B446 (Bar/ Rounds)
  • ASTM B564 (Forging)
  • ASTM B366 (Fitting)
  • ASTM B446 (Wire)

ALLOY 625 Equivalent ASME

American Society of Mechanical Engineers (ASME)

  • ASME SB444 (Pipe Seamless)
  • ASME SB705 (Pipe Welded)
  • ASME SB444 (Tube Seamless)
  • ASME SB704 (Tube Welded)
  • ASME SB443 & ASME SB906 (Sheet/ Plate / Strips / Coils)
  • ASME SB446 (Bar/ Rounds)
  • ASME SB564 (Forging)
  • ASME SB366 (Fitting)
  • ASME SB446 (Wire)

Inconel 625 Composition

Element Percent by Weight
Carbon 0.010 maximum
Manganese 0.50 maximum
Phosphorus 0.015 maximum
Sulfur 0.015 maximum
Silicon 0.50 maximum
Chromium 20.00 - 23.00
Nickel Balance
Molybdenum 8.00 - 10.00
Columbium 3.15 - 4.15
Titanium 0.40 maximum
Aluminum 0.40 maximum
Tantalum 0.05 maximum
Iron 5.00 maximum

Inconel 625 Properties

Temperature 0.2% Yield Strength Ultimate Tensile Strength Elongation Percent
°F °C psi MPa psi MPa
1920 1065 63,000 430 136,000 940 51.5

Inconel 625 Physical Properties

  • Density: 0.303 lb/in3(8.44 g/cm3
  • Specific Gravity: 8.44
  • Melting Range: 2350 - 2460°F (1280 - 1350°C)
  • Specific Heat: 0.098 Btu/lb x °F (410 Joules/kg x °K)
  • Magnetic Permeability (75°F, 200 oersted): 1.0006

Inconel 625 Rockwell Hardness

Condition Form Ultimate
Tensile
Strength,
ksi (MPa)
Yield
Strength
at 0.2%
offset,ksi (MPa)
Elongation
in 2"
percent
Hardness,
Rockwell
Annealed at 
1925°F (1052°C),
rapid cooled
Sheet
0.014-0.063"
thick
132.0 (910) 67.9 (468) 47 B94
Annealed at 
1925°F (1052°C),
rapid cooled
Sheet,*
0.0.78-0.155"
thick
131.5 (907) 67.4 (465) 45 B97
Annealed at 
1925°F (1052°C),
rapid cooled
Plate,***
1/4"
1/2"
3/4"
1.00"
1-1/2"
1-3/4"

132.0 (910)
130.0 (896)
132.3 (912)
127.2 (877)
127.3 (878)
128.0 (883)

65.5 (452)
67.0 (462)
80.0 (552)
75.3 (519)
73.7 (508)
66.0 (455)

46
44
44
42
43
44

B94
B98
B98
B97
B97
C20

Tensile Properties And Hardness

Upon exposure to intermediate tempera- tures, some hardening takes place in alloy 625. To demonstrate this reaction, samples of annealed rod were exposed to 1200°, 1400°, and 1600°F for 2000 hours. Measurements were made to de- termine dimensional stability; the samples exposed at 1200° to 1400°F for 2000 hours contracted about 0.048%.

Inconel 625 Thermal Conductivity

Temperature Range Linear Coefficients of Thermal Expansion1 · 10-6 Thermal Conductivity 2 3
°C °F /°C /°F W/m·K Btu/(hr/ft²/in/°F)
-157 -250 - - 7.3 4.2
-129 -200 - - 7.4 4.3
-73 -100 - - 8.3 4.8
-18 0 - - 9.2 5.3
21 70 - - 9.9 5.7
38 100 - - 10.0 5.8
93 200 12.8 7.1 10.7 6.3
204 400 13.1 7.3 12.6 7.3
316 600 13.3 7.4 14.2 8.2
427 800 13.7 7.6 15.7 9.1
538 1000 14.0 7.8 17.5 10.1
649 1200 14.8 8.2 19.0 11.0
760 1400 15.3 8.5 20.8 12.0
871 1600 15.8 8.8 22.8 13.2
927 1700 16.2 9.0 - -
982 1800 - - 25.3 14.6

Inconel 625 Electrical Resistivity

Temperature microhm-cm
°C °F
21 70 128.9
38 100 129.6
93 200 131.9
204 400 133.9
316 600 134.9
427 800 135.9
538 1000 137.9
649 1200 137.9
760 1400 136.9
871 1600 135.9
982 1800 134.9
1093 2000 133.9

Inconel 625 Machining

CAPACITY - Machine should be rigid and overpowered as much as possible.
RIGIDITY - Work piece and tool should be held rigid. Minimize tool overhang.
TOOL SHARPNESS - Make sure tools are sharp at all times. Change to sharpened tools at regular intervals rather than out of necessity. A 0.015 inch wear land is considered a dull tool.
TOOLS - Use positive rake angle tools for most machining operations. Negative rake angle tools can be considered for intermittent cuts and heavy stock removal. Carbide-tipped tools are suggested for most applications. High speed tools can be used, with lower production rates, and are often recommended for intermittent cuts.
POSITIVE CUTS - Use heavy, constant, feeds to maintain positive cutting action. If feed slows and the tool dwells in the cut, work hardening occurs, tool life deteriorates and close tolerances are impossible.
LUBRICATION - lubricants are desirable, soluble oils are recommended especially when using carbide tooling.

Inconel 625 Density

  • Density: 0.303 lb/in3 (8.44 g/cm3

Inconel 625 Ductility And Toughness

INCONEL alloy 625 retains its excellent ductility and toughness at low temperature.

Alloy 625 Features & Benefits

  • Heat and cold resistance
  • Chloride stress resistance
  • Corrosion cracking resistance
  • Salt, fresh water and alkaline chemical resistance
  • Stability during welding
  • Scaling and oxidization resistance

Common Applications Of Nickel Alloy 625

  • Jet engine components
  • Heat exchanger
  • Chemical processing equipment

Inconel 625 ASME Boiler And Pressure Vessel Code

INCONEL alloy 625 is an approved material of construction under the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME). Allowable design stresses for Grade 1 material for Section VIII, Division 1 construction up to 1200°F, for Section III, Class 2 and 3 construction up to 800 °F, and for Grade 2 material for Section VIII, Division 1 construction up to 1600°F of ASME Section II, Part D. Allowable stresses and rules for Section 1 construction with Grade 1 material up to 1100°F are found in ASME Code Case 1935.

Inconel 625 Microstructure

INCONEL alloy 625 is a solid-solution matrixstiffened face-centered-cubic alloy. The alloy may contain carbides, which are inherent in this type of alloy.

Inconel 625 Corrosion Resistance

The high alloy content of INCONEL alloy 625 enables it to withstand a wide variety of severe corrosive environments. In mild environments such as the atmosphere, fresh and sea water, neutral salts, and alkaline media there is almost no attack. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments. The high molybdenum content also makes this alloy very resistant to pitting and crevice corrosion, and niobium acts to stabilize the alloy against sensitization during welding, thereby preventing subsequent intergranular cracking. Also, the high nickel content provides freedom from chloride ion stresscorrosion cracking.

Inconel 625 Price In UK

Inconel 625 0.4mm (0.01575'') Thick Sheet - £50.00
Inconel Alloy 625 0.5mm (0.01969'') Thick Sheet - £54.00
Alloy 625 0.6mm (0.02362'') Thick Sheet - £61.00
Inconel 625 0.7mm (0.02756'') Thick Sheet - £64.00
Inconel Alloy 625 0.8mm (0.0315'') Thick Sheet - £71.00
Alloy 625 0.9mm (0.03543'') Thick Sheet - £81.00
Inconel 625 1.0mm (0.03937'') Thick Sheet - £70.00
Inconel Alloy 625 1.2mm (0.04724'') Thick Sheet - £80.00
Alloy 625 1.6mm (0.06299'') Thick Sheet - £101.00
Inconel 625 2.0mm (0.07874'') Thick Sheet - £35.00
Inconel Alloy 625 3.0mm (0.1181'') Thick Sheet - £43.00
Alloy 625 4.0mm (0.1575'') Thick Sheet - £50.00
Inconel Alloy 625 5.0mm (0.1969'') Thick Sheet - £55.00

Inconel 625 Price In India

Inconel 625 0.4mm (0.01575'') Thick Sheet - £45.00
Inconel Alloy 625 0.5mm (0.01969'') Thick Sheet - £50.00
Alloy 625 0.6mm (0.02362'') Thick Sheet - £60.00
Inconel 625 0.7mm (0.02756'') Thick Sheet - £63.00
Inconel Alloy 625 0.8mm (0.0315'') Thick Sheet - £70.00
Alloy 625 0.9mm (0.03543'') Thick Sheet - £80.00
Inconel 625 1.0mm (0.03937'') Thick Sheet - £69.00
Inconel Alloy 625 1.2mm (0.04724'') Thick Sheet - £79.00
Alloy 625 1.6mm (0.06299'') Thick Sheet - £100.00
Inconel 625 2.0mm (0.07874'') Thick Sheet - £34.00
Inconel Alloy 625 3.0mm (0.1181'') Thick Sheet - £42.00
Alloy 625 4.0mm (0.1575'') Thick Sheet - £48.00
Inconel Alloy 625 5.0mm (0.1969'') Thick Sheet - £54.00

Inconel 625 Price In China

Inconel Alloy 625 0.4mm (0.01575'') Thick Sheet - £47.00
Alloy 625 0.5mm (0.01969'') Thick Sheet - £40.00
Inconel 625 0.6mm (0.02362'') Thick Sheet - £50.00
Inconel Alloy 625 0.7mm (0.02756'') Thick Sheet - £60.00
Alloy 625 0.8mm (0.0315'') Thick Sheet - £75.00
Inconel Alloy 625 0.9mm (0.03543'') Thick Sheet - £48.00
Inconel 625 1.0mm (0.03937'') Thick Sheet - £69.00
Inconel Alloy 625 1.2mm (0.04724'') Thick Sheet - £79.00
Alloy 625 1.6mm (0.06299'') Thick Sheet - £104.00
Inconel 625 2.0mm (0.07874'') Thick Sheet - £34.00
Inconel Alloy 625 3.0mm (0.1181'') Thick Sheet - £42.00
Alloy 625 4.0mm (0.1575'') Thick Sheet - £48.00
Inconel 625 5.0mm (0.1969'') Thick Sheet - £55.00