The Inconel 718 can be described as a nickel-chromium alloy containing molybdenum, columbium, iron, and a very small amount of titanium and aluminum. The Inconel 718 Round Bar is high in strength, and they exhibit significant yields too. The Inconel 718 Round Bar is also known for its creep-rupture properties up to 704 degrees C and possesses high ductility too. Other characteristics of the Inconel 718 Rod will include good weldability and formability. It also shows higher cryogenic allowances compared to other nickel-based superalloys. The Inconel 718 Round Bar Stock comes with precipitation hardening, which helps in annealing and welding without the material occurring spontaneous hardenability during the heating or cooling processes.
We are one of India's top Inconel 718 Round Bar Suppliers supplying these non-magnetic and corrosion-resistant tubes to different parts of the world. The Inconel 718 material is shocked by heat-treating so that high strength and maximum Inconel 718 Round Bar Hardness can be achieved. We offer full customization of these products. To know about the exact Inconel 718 Bar Price, kindly call and explain the requirements.
We have a vast Inconel 718 Round Bar Stock which is also known for its oxidation resistance properties. Due to its excellent mechanical characteristics, the Inconel 718 Round Bar for Sale is purchased by various industries like airframe components, jet engines, etc. We produce Inconel 718 Hex Bar by all international standards, and there are a few sizes available in our inventory. But we offer easy customization according to the requirements, so there is nothing to worry about.
The Inconel 718 Flat Bar indeed has a good combination of physical and chemical properties- along with good weldability; it is also resistant to post-weld cracking. The Inconel 718 Square Bar can easily be welded in either annealed or aged conditions; however, doing it in aged conditions will form a softened heat-affected zone. Machining the UNS N07718 Bar in age-hardened condition will improve its chip action and give a better finish. Whereas machining the 2.4668 Inconel 718 Bar in annealed conditions will slightly increase the tool life of the product. The Alloy 718 Round Bar can be found in space crafts, rocket motors, aerospace components, etc. The Alloy 718 Bar also possesses great creep rupture strength at an increased temperature of up to 700 degrees C.
The 718 Inconel Round Bar can also be hot worked in a furnace, and its maximum temperature can go up to 1121 degrees C. The hot-cold working procedure on the 718 Inconel Bar within a temperature range of 927-1010 degrees C will improve the forging strength, given the service temperature is within 593 degrees C.
Purchasing AMS 5662 Inconel 718 from us, clients can be sure about the quality of the products. Our AMS 5663 Bar is tested several times by us and thor-parties to ensure its safety and quality. We use the best raw material and latest technologies for manufacturing the ASTM B637 UNS N07718 products to be legitimate and have dimensional accuracy.
We have been trading AMS 5662 Bar and Forgings for many years now. Our customers are based in the country and worldwide. Whenever they need AMS 5663 Bar and Forgings at the best prices, they contact us directly. Along with maintaining the quality of AMS 5664 Bar and Forgings, we also provide you with the best services. To save the ASTM B637 Bar from damages during transportation. We pack each of them in separate wooden boxes. We offer fast doorstep deliveries for your convenience.
Inconel 718 Material Specification: ASTM B637/ ASME SB637 Inco 718 Round Bar
Grade: Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy 601, 2.4851), ASTM B637 Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800, 1.4876)
Form: Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc.
Size Range: 15NB to 150NB In manufacturing process: Cold drawn/ Extruded
Length: 100 mm To 3000 mm Long & Above
Diameter (Size) : Metric M6 to M48, Inches - 1/4’’ to 2’’
Tolerance : H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients’ requirements
Finish : Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished
Condition : Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Threading
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
ASTM B637 UNS N07718 Round Bar
Inconel 718 Round Bar, Alloy 718 Round Bar
ASTM B637 UNS N07718 Flat Bar
Inconel 718 Flat Bar, Alloy 718 Flat Bar
ASTM B637 UNS N07718 Square Bar
Inconel 718 Square Bar, Alloy 718 Square Bar
ASTM B637 UNS N07718 Round Corner Square Bar
Inconel 718 Round Corner Square Bar, Alloy 718 Round Corner Square Bar
ASTM B637 UNS N07718 PSQ Bar (PUMP SHAFT QUALITY BAR)
Inconel 718 PSQ Bar (PUMP SHAFT QUALITY BAR), Alloy 718 PSQ Bar
ASTM B637 UNS N07718 Hexagonal Bar / Hexagon Bar
Inconel 718 Hexagon Bar, Alloy 718 Hexagon Bar
ASTM B637 UNS N07718 Flat Block Bar
Inconel 718 Flat Block Bar, Alloy 718 Flat Block Bar
ASTM B637 UNS N07718 Rectangular Bar
Inconel 718 Rectangular Bar, Alloy 718 Rectangular Bar
ASTM B637 UNS N07718 Hollow Ring Bar
Inconel 718 Hollow Ring Bar, Alloy 718 Hollow Ring Bar
ASTM B637 UNS N07718 Bright Round Bar
Inconel 718 Bright Round Bar, Alloy 718 Bright Round Bar
ASTM B637 UNS N07718 Forged Round Bar
Inconel 718 Forged Round Bar, Alloy 718 Forged Round Bar
ASTM B637 UNS N07718 Cold Drawn Bar
Inconel 718 Cold Drawn Bar, Alloy 718 Cold Drawn Bar
ASTM B637 UNS N07718 Hollow Bar
Inconel 718 Hollow Bar, Alloy 718 Hollow Bar
ASTM B637 UNS N07718 Circular Bar
Inconel 718 Circular Bar, Alloy 718 Circular Bar
ASTM B637 UNS N07718 Threaded Bar
Inconel 718 Threaded Bar, Alloy 718 Threaded Bar
ASTM B637 UNS N07718 Angle Bar
Inconel 718 Angle Bar, Alloy 718 Angle Bar
ASTM B637 UNS N07718 Forged Bar
Inconel 718 Forged Bar, Alloy 718 Forged Bar
ASTM B637 UNS N07718 Triangle Bar
Inconel 718 Triangle Bar, Alloy 718 Triangle Bar
ASTM B637 UNS N07718 Welding Rod
Inconel 718 Welding Rod, Alloy 718 Welding Rod
ASTM B637 UNS N07718 Threaded Rod
Inconel 718 Threaded Rod, Alloy 718 Threaded Rod
ASTM B637 UNS N07718 Filler Rod
Inconel 718 Filler Rod, Alloy 718 Filler Rod
Inconel 718 Forged Round Bars Capabilities: The maximum length for forged round bars and hex bars is 420 inches, in the ASTM B637 Inconel 718 Bars with a maximum weight of 20,000 pounds, 220 inches.
Inconel 718 Flat Bars Capabilities: The maximum length for ASTM B637 Alloy 718 flat bars is 220 inches in the ASTM B637 Inconel 718 Bars with a maximum weight of 15,000 pounds.
Inconel 718 Square Bars Capabilities: The maximum length for ASTM B637 Alloy 718 square bars is 220 inches in the ASTM B637 Inconel 718 Bars with a maximum weight of 15,000 pounds
Standard: ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5,DIN 17440,GB/T 1220
Inconel 718 Rod
| Inconel® Alloy 718 | |
|---|---|
| Ni | 50 – 55 |
| Fe | Bal |
| Cr | 17 – 21 |
| Cu | 0.3 max |
| Mn | 0.35 max |
| P | 0.015 max |
| S | 0.015 max |
| Si | 0.35 max |
| Ti | 0.65 – 1.15 |
| Al | 0.2 – 0.8 |
| Co | 1.0 max |
| B | 0.006 max |
| Density | 8.2 g/cm3 |
|---|---|
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 70,000 , MPa – 482 |
| Elongation | 45 % |
| API 6A 718 2004 | API 6A 718 2009 | Draft API 6A 718 |
|---|---|---|
| Chemistry requirements – please see our Alloy 718 data sheet | ||
| Measured of a remelt ingot per ASTM E354 / ASTM E1473 | No change | Not changed chemistry but added that for 716, 725; 925; 935 and 945 |
| Melt production: | ||
| Either: | ||
| Option a: Electric Furnace (EF) followed by one of Argon Decarburisation (AOD) or Vacuum Oxygen Decarburisation (VOD); and if required one or more Vacuum Arc Remelting (VAR) Or option b: Vacuum Induction Melting (VIM) followed by one or more as appropriate of Electroslag Remelting (ESR) or Electroflux Remelting (EFR) or Vacuum Arc Remelting (VAR) | Not changed melt process but added that for 716, 725; 925; 935 and 945 | |
| Reduction ratio: 3.75:1 minimum | Reduction ratio: 4:1 minimum | No change |
| Heat Treatment | ||
| Equipment qualified & calibrated to API 6A Must maintain copies of heat treatment charts for 5 years minimum. | Adds AMS 2750 as a a calibration standard reference. Instrumentation needs to be calibrated at least every 3 months and surveyed no less than once per year | |
| Temperature monitoring – to use either contact surface thermocouple or heat sink as per API 6A or ISO 10423 | No change | No change |
| Soln Anneal – 1021-1052 C for 1-2.5 hrs, cool in air, water, polymer or oil. | No change | No change |
| Age harden: 774-802C, for 6-8 hours; air cool. | No change | Same for 718 120k, 718 140k changed to 760-802 C for 6-8 hours & cool in air, inert gas, water, polymer or oil. |
| Complete re-heat treatment is permitted, or re-ageing without re- solution annealing provided cumulative ageing time is less than maximum allowed | No change | No change |
| Nickel Alloy 718 / Inconel 718 Cold R - Round *CG - Centerless Ground |
.260 CG .270 CG .290 CG .3225 CG .352 CG .385 CG 25/64 / (.390) CG .4475 CG 31/64 / (.484) CG .510 CG .525 CG |
.5725 CG .587 CG .635 CG .649 CG .760 CG 49/64 / (.765) CG .775 CG .790 CG .885 CG .900 CG 1.010 CG |
1.022 CG 1.135 CG 1.147 CG 1.260 CG 1.270 CG 1.390 / 1-25/64 CG 1.510 CG 1-3/4 CG 1-7/8 CG 2 CG |
| Nickel Alloy 718 / Inconel 718 Sol Trt - Flat *HR & P - Hot Rolled and Pickled |
1/2 X 1 HR&P 1/2 X 1-1/2 HR&P 1/2 X 2 HR&P |
3/4 X 1-1/2 HR&P 3/4 X 2 HR&P 3/4 X 4 HR&P |
1 X 2 HR&P 1 X 3 HR&P 1 X 4 HR&P |
| Nickel Alloy 718 / Inconel 718 Sol Trt - Round *HR & RT - Hot Rolled Rough Turned CG - Centerless Ground |
3/16 CG 13/64 /(.203) CG 15/64 / (.234) CG 1/4 CG .260 CG 17/64 / (.265) CG 9/32 CG 19/64 / (.296) CG 5/16 CG .3225 CG 21/64 / (.328) CG 11/32 CG 23/64 / (.359) CG 3/8 CG .385 CG 25/64 / (.390) CG 13/32 CG 27/64 / (.422) CG 7/16 CG .4475 CG 29/64 / (.453) CG 15/32 CG 31/64 / (.484) CG 1/2 CG .510 CG 33/64 / (.515) CG 17/32 CG 35/64 / (547) CG 9/16 CG .5725 CG 37/64 / (.578) CG |
19/32 CG 5/8 CG .635 CG 41/64 / (640) CG 21/32 CG 43/64 / (.672) CG 11/16 CG 45/64 / (.703) CG 23/32 CG 47/64 / (.734) CG 3/4 CG .760 CG 49/64 / (.765) CG 25/32 CG 13/16 CG 7/8 CG .885 CG 15/16 CG 1 CG 1.010 CG 1-1/16 CG 1-1/8 CG 1.135 CG 1-3/16 CG 1-1/4 CG 1-5/16 CG 1-3/8 CG 1-7/16 CG 1-1/2 CG 1-9/16 CG 1-5/8 CG |
1-11/16 CG 1-3/4 CG 1-13/16 CG 1-7/8 CG 2 CG 2-1/16 CG 2-1/8 CG 2-1/4 CG 2-3/8 CG 2-1/2 CG 2-5/8 CG 2-3/4 CG 3 CG 3-1/4 HR RT 3-1/2 HR RT 3-3/4 HR RT 3-7/8 HR RT 4 HR RT 4-1/4 HR RT 4-1/2 HR RT 4-3/4 HR RT 5 HR RT 5-1/2 HR RT 6 HR RT 7 HR RT 8 HR RT 9 HR RT 10 HR RT 11 HR RT 12 HR RT |
