Flanges are used to connect 2 pipes or to end a pipe. They can be made up of different materials depending upon the application that they are intended to be used in. Monel 400 Flanges is one such type of flange that is made up of monel 400 grade that is an excellent high performance alloy used in high pressure application. Monel Alloy Flanges offer resistance to alkali and acidic environments. Monel 400 Flanges Manufacturer In India recommends these flanges due to their high thermal conductivity and good ductility. Monel 400 Pipe Flangesare said to exhibit good performance in temperature ranging from sub zero to 1000 degrees F. cold working process is used to harden the ASTM B564 UNS N04400 Pipe Flange.
Monel 400 Socket Weld Flange has good weldability and moderate resistance to the corrosive environment. Nickel 400 Spectacle Blind Flange used to terminate a tube or a pipe is resistant to seawater and steam at elevated temperatures. DIN 2.4360 Swrf Flange is also resistant to caustic solution and salts. ASME SB564 N04400 Long Weld Neck Flangeis used to provide a tight seal to the pipe without welding it. Monel Pipe Flange is widely used in oil refineries as they reduce the failure experience by other metal and alloy flanges in the marine environment. Monel Blind Flange offers enhanced reliability even in severe conditions. Monel Flange Pressure Rating is high indicating that they can be used in high pressure environments.
Nickel Alloy 400 Forged Flanges display high tensile strength that makes it one of the best suited options for marine engineering, cabling, chemical processing, and piping. Class 150 Monel 400 Rtj Flange is used in temperatures upto 1000 degrees F and can be used in brackish water. Monel 400 Blind Flange also avoids stress corrosion cracking. Electric slang refining process double melts these Wnr 2.4360 Reducing Flange which improves the performance of these flanges. Uns N04400 Orifice Flangeis not required to be passed through post weld heat treatment. However, it is important to clean these Alloy 400 Slip-on Flange after the welding process is completed.
Specification: ASTM B564/ ASME SB564, ASTM B865/ ASME SB865, ASTM B366/ ASME SB366
Grade: Monel 400 (UNS N04400, Alloy 400, 2.4360), Monel K500 (UNS N05500, Alloy K500, 2.4375)
Connect Type/ Flange Face Type: Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Size Range: 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Facings: Raised Face, RTJ Flanges etc.
To ANSI, DIN, EN, JIS, etc. or according to drawing
Monel Welding Neck Flanges/ WNRF
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Plate Flanges
AS A150, AS A300, TABLE D,E,F,H, DIN, ND-6,10, 16, 25, 40
Monel Slip On Flanges/ SORF
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Blind Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Threaded Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Socket Weld Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Orifice Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Blank Flange
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Blank Flange Rotatable Monel 400
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Welding Flange Rotatable
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Flange with Tube
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Reducing Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel CF (ConFlat) Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Flange Bolted Weld-On
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Square /Exhuast Flange
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Lap Joint Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Girth Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Spectacle Blind Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Anchor Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Screw Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Ring Joint Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Swivel Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel ANSI 150 Flanges
Flat Face, Raised Face, Tongue, Groove, Female, Male, RJ Face
Monel Long WN Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Spade Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Spacer Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Monel Figure 8 Flanges
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Slip-On Flanges in Mumbai, India
Monel Socket Weld Flange is similar to a Monel Flanges except it has a bore and a counter bore dimension. The counter bore is slightly lager than the outer diameter of the matching pipe, allowing the pipe to be inserted into the flange similar to a Monel slip-on flange. Buy Monel Slip-On Flanges, Monel SORF Flange, Monel Slip-On Flanges at Best Price in India.
Monel Slip-On Flanges Standard
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Threaded Flanges in Mumbai, India
The Monel Threaded Flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and in highly explosive areas where welding create a hazard. Buy Monel Threaded Flanges, Monel Screwed Flange, Monel Threaded Flange at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Weld Neck Flanges in Mumbai, India
The Monel Weld Neck Flange is normally referred to as the "high hub" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. Buy Monel Weld Neck Flanges, Monel WNRF Flange, ASME SB 564 Monel Weld Neck Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Socket Weld Flanges in Mumbai, India
Monel Socket Weld Flange is a solid disk used to block off a pipeline or to create a stop. The Socket Weld flange is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket sealing rings machined into the mating surface. Buy Monel Socket Weld Flanges, Monel SWRF Flange, ASME SB 564 Socket Weld Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Blind Flanges in Mumbai, India
The Monel Blind Flange is a solid disk used to block off a pipeline or to create a stop. The UNS N04400 blind flange is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket sealing rings machined into the mating surface. Buy Monel Blind Flanges, Monel BLRF Flange, ASME SB 564 Blind Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Reducing Flanges in Mumbai, India
We supply reducing flanges (WN, SW, SO, Thrd) with the hubs or made from blinds (in the cases of SO or Thrd). Buy Monel Reducing Flanges, Monel reducing flanges with hubs, ASME SB 564 Reducing Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Lap Joint Flanges in Mumbai, India
The Monel Lap Joint Flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange race. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together in an assembly system. Buy Monel Lap Joint Flanges, Monel LJ Flange, ASME SB 564 Lap Joint Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Plate Flanges in Mumbai, India
We are specialised manufacturer & exporter of high quality ASME/ANSI/DIN standard Monel plate flanges in India. Buy Monel Plate Flanges, Monel Flat Flange, ASME SB 564 Plate Flanges at Best Price in India.
We are Manufacturer| Suppliers | Distributor| Stockholder| Wholesaler| Dealer| Stockist| Exporter| Importer of Monel Alloy Orifice Flanges in Mumbai, India
Monel Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Buy Monel Orifice Flanges, Monel Orifice Plate Flange, ASME SB 564 Orifice Flanges at Best Price in India.
Monel 400 Flanges
| American Series | European Series |
|---|---|
| Flat Face (FF) | Type A (Flat Face) |
| Raised Face (RF) | Type B (Raised Face) |
| Tongue (T) | Type C(Tongue) |
| Groove (G) | Type D (Groove) |
| Female (F) | Type E (Spigot) |
| Male (M) | Type F (Recess) |
| Ring Joints Face (RJ) | Type G (O-Ring Spigot) |
| - | Type H (O-Ring Groove) |
| ASME B16.5-2013 | ASME B16.47-2011 | MSS SP-44-2010 |
| EN 1092-1-2007 | EN 1759-1-2004 | ISO 7005-1-1992 |
| GB/T 9112-2010 | GB/T 9123-2010 | AS 2129-2000 |
| HG/T 20592-2009 | HG/T 20615-2009 | HG/T 20623-2009 |
| SH/T 3406-2013 | GOST- AFNOR- BS- DIN | - |
| C | MN | S | SI | NI | CU | FE |
| .30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
| Marking | Product and Designation | |||||
|---|---|---|---|---|---|---|
| Corrosion Resistant Fittings | ASME Pressure Fittings | Alloy | UNS Designation | Pipe or Tube | Plate, Sheet, strip | Bar Forging, and Forging Stock |
| CRNCᶜ | WPNCᶜ | Ni-Cu | N04400 | B165 | B127 | B164, B564 |
