Pipes are made up of various metals and alloys. They can be connected using various types of fittings. Monel 400 Pipe Fittings are one such fitting that is made up of nickel copper alloy. Monel Pipe Fittings are able to resist steam and seawater even at elevated temperatures. They also resist salts and caustic solutions. In freshwater Monel, Fittings are also said to be resistant to stress corrosion cracking. Heat and high temperature do not affect these fittings. Monel 400 Fittings also display excellent mechanical properties even at zero temperature. Hence they are said to be versatile in nature.
ASTM B366 UNS N04400 also displays excellent resistance to hydrofluoric and hydrochloric acid. Even under harsh environments, these Alloy 400 Fittings display good flexibility and durability. They are easy to disassemble and reassemble. They are also easy to clean and therefore have a low maintenance cost. UNS N04400 Elbow offers higher strength and resistance under high pressure and high temperature. These Nickel Alloy 400 Buttweld Tee also offer tighter seals in applications that work at lower pressure. They are highly ductile and malleable. They offer resistance to pitting and crevice corrosion.
Nickel 400 forged Fittings are used in hydraulic and pneumatic systems due to their excellent resistivity and strength. They also offer corrosion resistance in the marine environment. 2.4360 Eccentric/ Concentric Reducer are used in pumps, valves, and shafts. They are one of the most relied on pipes for chemical processing and hydrocarbon processing industries. Monel K500 2D/ 3D/9D Tube Bends are used in marine engineering and seawater purification. Moreover, they are also used in oil and gas processing, heat exchangers, and power generation. They also offer good formability features.
ASTM B366 UNS N04400 Monel 400 Pipe Fittings Specification: ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Equivalents: Monel 400/Alloy 400/Werkstoff 2.4360
Inconel Pipe Fittings Grade: ASTM B366 UNS N04400 Monel 400 Fittings
Type Seamless / Welded / Fabricated Monel 400 Pipe Fittings
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Monel 400 Pipe Fittings
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43. ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Threaded end-2000lb/ 3000lb/ 6000lbs Monel 400 Pipe Fittings
Socket-weld end-3000/ 6000/ 9000lbs Monel 400 Pipe Fittings
ASTM B366 UNS N04400 Monel 400 Pipe Fittings Thinckness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS
Surface Treatment Transparent oil, rust-proof black oil or hot galvanized
Special design as your drawing
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Grade: Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy 601, 2.4851), Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800)
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine,etc
ASTM B366 UNS N04400 Monel 400 Pipe Fittings Origin West Europe / Japan / Indian / USA / Korean
Test Certificates for ASTM B366 UNS N04400 Monel 400 Pipe Fittings Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report
ASTM B366 UNS N04400 Monel 400 45 degree Elbow
ASTM B366 UNS N04400 Monel 400 90 degree Elbow
ASTM B366 UNS N04400 Monel 400 180 degree Elbow
ASTM B366 UNS N04400 Monel 400 Pipe Cap
ASTM B366 UNS N04400 Monel 400 Concentric Reducer
ASTM B366 UNS N04400 Monel 400 Eccentric Reducer
ASTM B366 UNS N04400 Monel 400 Reducing Tee
ASTM B366 UNS N04400 Monel 400 Stub End
ASTM B366 UNS N04400 Monel 400 Pipe Tee
Monel Pipe Fittings
ASTM B366 UNS N04400 Monel 400 45 degree Elbow
ASTM B366 UNS N04400 Monel 400 90 degree Elbow
ASTM B366 UNS N04400 Monel 400 Pipe Cap
ASTM B366 UNS N04400 Monel 400 Pipe Cross
ASTM B366 UNS N04400 Monel 400 Full Coupling
ASTM B366 UNS N04400 Monel 400 Half Coupling
ASTM B366 UNS N04400 Monel 400 Reducing Coupling
ASTM B366 UNS N04400 Monel 400 Reducing Tee
ASTM B366 UNS N04400 Monel 400 Pipe Tee
ASTM B366 UNS N04400 Monel 400 Forged Union
ASTM B366 UNS N04400 Monel 400 Pipe Plug
ASTM B366 UNS N04400 Monel 400 Threaded Pipe Nipple
The compositional range for Monel 400 Pipe Fittings is provided in the table below.
Element |
Content |
| Ni | |
Cu |
|
Fe |
|
Mn |
Typical properties of Monel 400 Pipe Fittings are covered in the following table.
Property |
Metric |
Imperial |
Density |
8.8 g/cm3 |
0.318lb/in3 |
Melting point |
1350°C |
2460°F |
Co-Efficient of Expansion |
13.9µm/m.°C |
7.7x10-6 in/in.°F |
Modulus of rigidity |
||
Modulus of elasticity |
105-120 kN/mm2 |
15230-17405 ksi |
Condition of Supply |
Heat Treatment (After Forming) |
|||
Annealed/Spring Temper |
Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool. |
|||
Condition |
Approx Tensile Strength |
Approx Service Temp. |
||
Annealed |
400 - 600 N/mm2 |
58 - 87 ksi |
-200 to +230°C |
-330 to +445°F |
Spring Temper |
850 - 1050 N/mm2 |
123 - 152 ksi |
-200 to +230°C |
-330 to +445°F |
Monel 400 Pipe Fittings is covered by the following standard:
Equivalent materials to Monel 400 Pipe Fittings are:
Monel 400 Pipe Fittings typically finds application in:
| ASTM B366 /ASME SB366 | UNS N02200/WPN /CRN | UNS N02201/WPNL /CRNL | UNS N04400/WPNC /CRNC |
| UNS N06022/WPHC22 /CR HC22 | UNS N06025/WPV602 /CRV602 | UNS N06030/WPHG30 /CR HG30 | |
| UNS N06200/WHC2000 /CR HC2000 | UNS N06230/WPH230 /CRH230 | UNS N06455/WPHC4 /CR HC 4 | |
| UNS N06625/WPNCMC /CRNCMC | UNS N06985/WPHG3 /CR HG3 | UNS N08020/WP20CB /CR20CB | |
| UNS N08120/WPH120 /CRH120 | UNS N08330/WP330 /CR330 | UNS N08367/WP6XN /CR6XN | |
| UNS N08811/WPNIC11 /CRNIC11 | UNS N08825/WPNICMC /CRNICMC | UNS N08925/WP1925 /CR1925 | |
| UNS N10003/WPHN /CR HN | UNS N10276/WPHC276 /CR HC 276 | UNS N10629/WPVB4 /CRVB4 | |
| UNS N12160/WPH160 /CRH160 | UNS R20033/WP3033 /CR3033 | UNS R30556/WPH556 /CRH556 | |
| UNS N06002/WPHX /CR HX | UNS N06007/WPHG /CR HG | UNS N06045/WPV45TM /CRV45TM | |
| UNS N06600/WPNCI /CRNCI | UNS N06059/WP5923 /CR5923 | UNS N06603/WP603GT /CR603GT | |
| UNS N08904/WP904L /CR904L | UNS N08031/WP3127 /CR3127 | UNS N08800/WPNIC /CRNIC | |
| UNS N08926/WP1925N /CR1925N | UNS N08810/WPNIC10 /CRNIC10 | UNS N10001/WPHB /CR HB | |
| UNS N10665/WPHB-2 /CR HB2 | UNS N10675/WPHB-3 /CR HB3 |
Class |
Construction |
Non-destructive Examination |
|---|---|---|
S |
Seamless |
None |
W |
Welded |
Radiography or Ultrasonic |
WX |
Welded |
Radiography |
WU |
Welded |
Ultrasonic |
| Trade Name | UNS # |
|---|---|
| Monel® 400 | N04400 |
ASTM A182 – ASME SA182 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 – Factory-Made Wrought Buttwelding Fittings
ASME B16.11 – Socket Welding and Threaded Forged Fittings
MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
MSS SP-95 – Swage(d) Nipples and Bull Plugs
BS3799 – Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry
Origin & Mills: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin, Indian Mills, Japanese Mills, Korean Mills, European MIlls, US Mills, Russian Mills, Ukraine MIlls
| Products | Size | |
|---|---|---|
| Monel 400 90° Elbows | Alloy 400 Couplings | Sizes 1/8" -4" Pressure Ratings - 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Monel 45° Elbows | ASTM B366 UNS N04400 Reducers | |
| Nickel Alloy 400 Street Elbows | UNS N04400 Inserts | |
| Nickel 400 Tees | Monel Alloy 400 Caps | |
| DIN 2.4360 Crosses | Monel 400 Unions | |
| ASTM B366 UNS N04400 Pressure Class | 3000LBS, 6000LBS, 9000LBS |
| Nickel Alloy 400 Socket Weld Pipe Fittings | Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert |
| Dimension Specifications | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | 1/8"~4" (DN6~DN100) |
| Nickel 400 Pressure Class | 3000LBS, 6000LBS, 9000LBS |
| Monel Alloy 400 Threaded Pipe Fittings Products | Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Street Elbow, Coupling, Half Coupling, Reducing Coupling, Cap, Hex Head Bushing, Hex Head Plug, Square Head Plug, Round Head Plug, Bull Plug, Boss, Outlet, Hex Nipple, Swage Nipple |
| Dimension Specifications | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | 1/8"~4" (DN6~DN100) |
| Marking | Product and Designation | |||||
|---|---|---|---|---|---|---|
| Corrosion Resistant Fittings | ASME Pressure Fittings | Alloy | UNS Designation | Pipe or Tube | Plate, Sheet, strip | Bar Forging, and Forging Stock |
| CRNCᶜ | WPNCᶜ | Ni-Cu | N04400 | B165 | B127 | B164, B564 |
