Monel belongs to a group of nickel alloys. The Monel 400 Tube is produced with high concentrations of copper and chromium in their chemical composition. These tubes are designed to suffice in corrosion stress-induced environments. They don’t easily dissociate or deform under any temperatures. The SB 163 N04400 grade is designed with superior strength and excellent mechanical properties. They possess a minimum tensile strength of 550Mpa and a minimum yield strength of 240Mpa. The products from this grade can be easily elongated by 40%. The Monel Alloy 400 High Pressure Tube is designed with a density of 8.8 g/cm3. These tubes can withstand pressures up to 7000 PSIG. Apart from this, these tubes possess superior resistances in alkaline and neutral salts. The Monel Alloy 400 Tubing is highly versatile and widely used in marine ecosystems, chemical processing, hydrocarbon equipment, fasteners, shafts, etc. We are the leading Monel 400 Tubing Suppliers in India. We thrive to supply top-quality products across all our outlets in the country.
The Monel 400 Seamless Tube is made with a single piece of sheet metal without the requirements of welds or seams. These tubes are very strong as a result are a little expensive. They are available in sizes between 3.35mm OD to 101.6mm OD. The Monel 400 Welded Tube is manufactured by welding pieces of sheet or coil together. These tubes are cost-effective but very reliable. They are available in standard sizes between 6.35mm OD to 152mm OD which, can be customized on request. The 2.4360 Alloy 400 Coiled Tubing can be machined and fabricated easily. This tubing exhibits resistance against pitting and crevice corrosion. They can be polished, annealed, and galvanized to give them better resistance and tolerance. The tubes from this grade can be drawn in different shapes. The Werkstoff 2.4360 Monel 400 Round Tube has good ductility and thermal conductivity in different environments. They can be availed in different schedules. Our renowned workers make use of the best raw materials and cutting-edge technology while producing products of the ASTM B165 UNS N04400 grade.
The Alloy 400 Boiler Tube is designed to withstand high pressures and temperatures in industrial boilers. These tubes can be easily cold-rolled after the hot-rolling procedures to improve their hardness and tolerances. In the Alloy 400, Heat Exchanger Tube fluids and gases are passed within the system. The tubes don’t deform or dissociate under severe cyclic or thermal conditions. These tubes are easy to maintain and have a long service life. The Sb-163 Condenser Tube Material is designed to condense process fluid before it gets into the system. This material is widely used in boilers, refrigerators, and chillers. The tubes from this material can have plain, beveled, and treaded tubing ends. All our products including, the Alloy 400 Tube, can be custom designed in different shapes and sizes as per the requirements of our clients. If you have any queries or want to know more about our products, contact us to know more.
Product Name: ASTM B163 UNS N04400 Monel 400 Seamless Tubes
Finish: Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Straight lengths: Maximum 65 ft (20 m)
Forms: Straight or ‘U’ bent Tubes
Surface Finish:
16 micro inch Ra (ID 0.4 micron Ra) (as drawn)
4 micro inch Ra (ID 0.1 micron Ra) (electropolished)
We can also cut, thread, and groove ASTM B163 UNS N04400 Monel 400 Seamless Tubes to meet your specifications.
NICKEL ALLOYS/ NIMONICS: AMS 5580 Alloy 600 AMS 5581 Alloy 625 AMS 5582 Alloy X750 AMS 5589 Alloy 718 BSHR 403 HTA75 (Alloy 75) BSHR 404 Alloy 263 MSRR 6513 FV607 MSRR 7006 Alloy 75 MSRR7037 Alloy C263
Alloy 400 Tubing, ASTM B163 UNS N04400 Tubing, B163 UNS N04400 Tubing suppliers in IndiaAvailable ASTM B163 UNS N04400 Monel 400 Tubing product forms
Typical manufacturing specifications
Standards: ASTM / ASME SB 163 / 165
Grades:
Monel 400 (UNS No. N04400)
Monel 500 (UNS No. N05500)
Range: 1 mm OD upt o 254 mm OD in 0.2 TO 20 mm thickness.
Type: Seamless, ERW, Welded, CDW
Form: Round, Square, Rectangular, Coil, ‘U’ Shap
Others: Hydraulic Tube, Horn Tube, Capillary Tube, Boiler Tube, Precision Tube, IBR Tube
Length: Single Random, Double Random & Cut Length
End: Plain End, Beveled End, Threaded
Trade Name & size:
Alloy 400 Tubes SuppliersCondition: Hard (Y) / Soft (M)
Dimension: OD*Thk*L (10-219)*(0.5-10)*(1000-15000) mm
Thickness Range: 0.5 mm-60 mm
Monel 400 alloy has a very good corrosion resistance in fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. And it has better corrosion resistance than copper in the sea water. Acid medium: Monel 400 are corrosion resistant in concentration of less than 85% of sulfuric acid. Monel 400 is one of the very few and most important material in resistant to hydrofluoric acid.
Water erosion: in most cases of water erosion, Monel 400 alloy not only excellent corrosion resistance and pitting corrosion, stress corrosion, also rarely found, the corrosion rate less than 0.025mm/a.
High temperature corrosion: Monel 400 continuous work in the highest air temperature is generally about 600 ℃, in high temperature steam, the corrosion rate less than 0.026mm/a. Ammonia: As Monel 400 alloy have high content of nickel, it can be resistant to anhydrous ammonia below 585 ℃ under the conditions of corrosion and ammonification.
Steel Tubes India is the only company in India who awarded by Indian Government for Export Excellence for 6 consecutive Years.
ASTM B163 UNS N04400 Monel 400 Pipe Trade Name & Size:
Alloy 400 Seamless Tubess suppliersOrigin Standard: American Standard, Russia Standard, Janpanese Standard, European Standard
SHORTEST Possible Delivery: Shutdown / Emergency/ Project Rush Demands
Certification: ISO EN 10204 3.1/ 3.1B/ 3.2, PED, DNV, TUV.
End: Plain End, Beveled End, Threaded
Manufacturers:
Steel Tubes India is first company in India who awarded by Indian Government for Export Excellence for 6 consecutive Years.
ASTM B163 UNS N04400 Monel 400 Seamless pipe Trade Name & Size:
Alloy 400 Seamless pipe suppliersClients reference list: ISC (Japan), ISC (Iran), BHEL (India), Media air-conditioning, SUMSUNG (Korea), GNG Co., Ltd. (Korea), and ZAN (Japan). GE (USA) etc.
Technical requirements * according to:
ASTM B161/ ASME SB161
ASTM B165/ ASME SB165
ASTM B163/ ASME SB163
ASTM B167/ ASME SB167
ASTM B444, AMS 5581
ASTM B622, ASTM B729,
ASTM B677, ASTM B722
ASTM B163 UNS N04400 Monel 400 Seamless Tubes Trade Name & Size:
Alloy 400 Seamless Tubess suppliersInspection and testing terms: Ultrasonic testing, electric non-destructive testing, flaring testing, hydrostatic testing, flattening testing, visual surface inspection, dimensional inspection, tensile properties inspection and chemical elements analysis, Bend test,Hydrostatic, Eddy Current, Heat Treatment, Hardness, Flaring test, I.C.test
Marking: All Monel 400 tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
ASTM B163 UNS N04400 Monel 400 Welded pipe Trade Name & Size:
Alloy 400 Welded pipe suppliersASTM B163 UNS N04400 Monel 400 Welded tube Trade Name & Size:
Alloy 400 Welded Tubes SuppliersAlloy Material:
Nickel : Nickel 200,201
Ni-cu alloy : alloy 400
Ni-Cr-Fe alloy: alloy 600, 690, 020,028
Ni-Cr-Mo alloy: alloy 625, C-4, C-22, C-2000, G-30, G-35
Ni-Fe-Cr alloy: alloy 800, 800H, 800HT, 825
Ni-Mo alloy: alloy B-2, B-3
Ni-Mo-Cr alloy: alloy C-276
ASTM B163 UNS N04400 Monel 400 Protection tube Trade Name & Size:
Alloy 400 Protection Tubes SuppliersASTM B163 UNS N04400 Monel 400 Cold Drawn Seamless pipe Trade Name & Size:
Alloy 400 Cold Drawn Seamless pipe suppliersASTM B163 UNS N04400 Monel 400 Cold Drawn Seamless tube Trade Name & Size:
Alloy 400 Cold Drawn Seamless Tubes suppliersASTM B163 UNS N04400 Monel 400 Extruded Seamless Pipe Trade Name & Size:
Alloy 400 Extruded Seamless Pipe suppliersASTM B163 UNS N04400 Monel 400 Extruded Seamless Tube Trade Name & Size:
Alloy 400 Extruded Seamless Tubes suppliersASTM B163 UNS N04400 Monel 400 Round Tube Trade Name & Size:
Alloy 400 Round Tubes SuppliersASTM B163 UNS N04400 Monel 400 Square Tube Trade Name & Size:
Alloy 400 Square Tubes SuppliersASTM B163 UNS N04400 Monel 400 Coiled Tubing Trade Name & Size:
Alloy 400 Coiled Tubing suppliersASTM B163 UNS N04400 Monel 400 Rectangular Tube Trade Name & Size:
Alloy 400 Rectangular Tubes SuppliersASTM B163 UNS N04400 Monel 400 Tubing bends Trade Name & Size:
Alloy 400 Tubing bends suppliersASTM B163 UNS N04400 Monel 400 High temperature alloy tubing Trade Name & Size:
Alloy 400 High temperature alloy tubing suppliersASTM B163 UNS N04400 Monel 400 Tubería Trade Name & Size:
Alloy 400 Tubería suppliersASTM B163 UNS N04400 Monel 400 Tubo Trade Name & Size:
Alloy 400 Tubo suppliersASTM B163 UNS N04400 Monel 400 Precision tube Trade Name & Size:
Alloy 400 Precision Tubes SuppliersASTM B163 UNS N04400 Monel 400 Capillary tube Trade Name & Size:
Alloy 400 Capillary Tubes SuppliersASTM B163 UNS N04400 Monel 400 Hot finished seamless tubing (HFS) Trade Name & Size:
Alloy 400 Hot finished seamless tubing (HFS) suppliersASTM B163 UNS N04400 Monel 400 Cold drawn seamless tubing (CDS) Trade Name & Size:
Alloy 400 Cold drawn seamless tubing (CDS) suppliersASTM B163 UNS N04400 Monel 400 Electric resistance welded (ERW) Trade Name & Size:
Alloy 400 Electric resistance welded (ERW) suppliersASTM B163 UNS N04400 Monel 400 Drawn over mandrel (DOM) Trade Name & Size:
Alloy 400 Drawn over mandrel (DOM) suppliersASTM B163 UNS N04400 Monel 400 Heat Exchanger Tube Trade Name & Size:
Alloy 400 Heat Exchanger Tubes SuppliersASTM B163 UNS N04400 Monel 400 Finned Tube Trade Name & Size:
Alloy 400 Finned Tubes SuppliersTest: Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Equipment: Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
ASTM B163 UNS N04400 Monel 400 Seamless Tubes Origin: West Europe / Japanese / Indian / USA / Korean / American / European
Test Certificates for ASTM B163 UNS N04400 Monel 400 Seamless Tubes: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report
Monel 400 Tube
Monel 400 Welded Tube
| Element | Content |
| Ni | |
| Cu | |
| Fe | |
| Mn |
| Property | Metric | Imperial |
| Density | 8.8 g/cm3 | 0.318lb/in3 |
| Melting point | 1350°C | 2460°F |
| Co-Efficient of Expansion | 13.9µm/m.°C (20-100°C) |
7.7x10-6 in/in.°F (70-212°F) |
| Modulus of rigidity | ||
| Modulus of elasticity | 105-120 kN/mm2 | 15230-17405 ksi |
| Condition of Supply | Heat Treatment (After Forming) | |||
| Annealed/Spring Temper | Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool. | |||
| Condition | Approx Tensile Strength | Approx Service Temp. | ||
| Annealed | 400 - 600 N/mm2 | 58 - 87 ksi | -200 to +230°C | -330 to +445°F |
| Spring Temper | 850 - 1050 N/mm2 | 123 - 152 ksi | -200 to +230°C | -330 to +445°F |
Monel Tube
| OUT DIAMETER | WALL THICKNESS | LENGTH | ||
|---|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters | |
| Seamless (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters | |
| Welded (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters | |
| Marking | Product and Designation | |||||
|---|---|---|---|---|---|---|
| Corrosion Resistant Fittings | ASME Pressure Fittings | Alloy | UNS Designation | Pipe or Tube | Plate, Sheet, strip | Bar Forging, and Forging Stock |
| CRNCᶜ | WPNCᶜ | Ni-Cu | N04400 | B165 | B127 | B164, B564 |
