Pipe Bend

Carbon Steel ASTM A234 WPB Elbow and Hot Induction Bends manufacturer in India

Piping systems transport fluids and gases across various systems. A Pipe Bend is used to change the direction of flow within the system. These bends help in transmission of these fluids and gases across long distances. They have a minimum bending radius of about 1.5 times the pipe radius. A hot induction bend follows a controlled bending process wherein pipes are bend using a high frequency induced power. The bending radius in these bends is between 3D to 10D, and the angles range up to 180°. In the miter bend, pipe ends are cut at an angle and joined together. These bends are available by either joining 2 pipes of 45° together or 3 pipes of 22.5° together giving, them a 90° bend. SS Mitered Pipe Bend is designed with high corrosion and oxidation resistance properties. These bends can be easily cleaned and possess a long service life. The ASME B16.49 Pipe Bend is used for various applications in shipbuilding, commercial vehicles, industrial systems, transportation of fluids and gases, architecture, automotive industries, and so on. We are the leading Hot Induction Bend manufacturer. Our vision is aimed at producing high-quality products, which are available at feasible rates.

Pipe Bend

The ASTM A860 WPHY42 Seamless Bend possesses superior strength and excellent mechanical properties. These bends are produced without the requirements of any seams or welds. The ASTM A234 WPB U Bend is used in various plumbing systems. These bends contain water and prevent sewer gases from passing through the pipes and entering leaving spaces. Apart from this, they prevent clogging from taking place within the system. In the ASTM A403 WP304 Long Radius Bend, the radius of curvature is more than 1.5 times the nominal size. These bends allow less friction resistance between fluids and show lower pressure drops. The Stainless Steel Short Radius Bends are preferred in applications where there is less space available. These low-cost bends have a radius of curvature, which, is 1.0 times the nominal size of the pipe. We are the pipe bend manufacturer who can customize all our products as per your requirements in different shapes and sizes.

The Carbon Steel 3D Pipe Bend allows the bending of pipes without any collapsing or crippling of the existing pipe. These bends possess a good concentration of carbon which gives them enhanced strength and excellent properties. API 5L 5D Pipe Bend is designed with a smooth finish. They have high working efficiency and can bend in various angles and radiuses. The Stainless Steel Return Bend is used to change the direction of flow by 180 degrees. These bends are preferred in connecting parallel pipes together to avoid sedimentation or blockage due to some elements. The Carbon Steel J Bend is known for its excellent performance and structure in various systems. These bends are fabricated in a J shape and are mostly used in draining water from piping systems. An Alloy Steel Flange Bend is available in different schedules ranging from SCH 5 to SCH 160. These bends are coated, galvanized, phosphated, etc. The main difference between a pipe bend and the ASTM A106B Elbow is that the elbow is shorter than a bend. Apart from this, elbows are mostly designed with either a 45 or 90 degrees radius. If you have any questions about our products, contact us for more information.

Manufacturer and supplier of ASTM A403 WP304 3D/ 5D Bend and Stainless Steel Return Bend in Mumbai as per ASME B16.9/ ISO 15590-1


Hot Induction Bend Specification

ASTM A106B SR Elbow, A420 WPL6 Long Radius Elbow and A860 WPHY42 Miter Bend manufacturer in Mumbai, check sizes and bending radius

Computerized systems to design Hot Induction Bend:
Computerized systems and advanced programs allow our technical department to design and optimize the Hot Induction Bend & other special fittings and flanges respecting all customer' specifications and applications.

Hot Induction Bend Design in accordance with recognized Rules.
Calculation in complete accordance with ASME, DIN, EN and STOOMWEZEN rules.

Pipe Bend Grades available

Manufacturer of API 5L Grade B Pipe Bend in all radius such as 3D 4D, 5D, 1.5D, 2D, 6D, 7D, 8D, 9D, 10D in LR/ Short Radius in Mumbai

Nickel Alloy Hot Induction Bend

ASTM / ASME SB 336 UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)

Copper Alloy Steel Hot Induction Bend

ASTM / ASME SB 111 UNS NO.C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 , C 71500
ASTM / ASME SB 466 UNS NO.C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)

Stainless Steel Hot Induction Bend

ASTM / ASME SA 403 GR WP "S" / "W" / " WX" 304 , 304L, 304H, 304N, 304LN, 309, 310H, 316, 316H, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel Hot Induction Bend

ASTM / ASME SA 815 UNS NO.S 31803, S 32205, S 32550, S 32750, S 32760

Carbon Steel Hot Induction Bend

ASTM / ASME A 234 WPB, WPC
ASTM / ASME A 860 WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70

Alloy Steel Hot Induction Bend

ASTM / ASME A 234 WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91

Types : Forged Elbow, Forged Tee, Forged Reducer, Forged Return Bends, Forged Stub-Ends, Forged Cap, Forged Collar, Forged Cross, Forged Insert etc.
Hot Induction Bend Size : 1/2” NB TO 24” NB.

Hot Induction Bend Material

Seamless Fittings – 1/2” to 24” Welded Fittings – 1/2” to 60”
Elbow LR & SR Bend, Crosses, Stub-End, Tee, Reducer, Flange, End Cap
Long Radius Bends, Long Radius Piggable Bends, Induction Pipe Bending Bends
Long Radius Carbon Steel Bends, Long Radius High Yield Carbon Steel Bends
Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Long Radius Piggable Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Hot Induction Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
API-5L Hot Induction Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Induction Pipe Bending Bends 2D, 3D, 5D, 6D, 8D upto 22D
Induction Long Radius Pipe Bending Bends API 5L X42, X46, X52, X56, X60, X65, X70
Induction Long Radius Pipe Bending Bends API5LX-42, X-46, X-52, X-56, X-60, X-65, X-70
Long Radius Bends 30 Deg., 45 Deg., 60 Deg., 90 Deg., 180 Deg., 360 Deg. upto 60" Diameter
Long Radius Bends in API 5L X42, API 5L X46, API 5L X52, API 5L X56, API 5L Grade B
Long Radius Bends in API 5L X60, API 5L X65, API 5L X70, API 5L Grade-B
Long Radius Bends in API 5L X-42, API 5L X-46, API 5L X-52, API 5L X-56, API 5L Grade B
Long Radius Bends in API 5L X-60, API 5L X-65, API 5L X-70, API 5L Grade-B
SA-234 WPB, WPC, WP1, WP5, WP7, WP9, WP11CL7, WP12CL1, WP22, WP91
ASTM A-860 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WPHY-60, WPHY-65, WPHY-70
ASTM A-860 WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70
MSS SP75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WPHY 60, WPHY 65, WPHY 70
MSS SP75 WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70
MSS-SP-75 WPHY42, WPHY46, WPHY52, WPHY56, WHPY60, WHPY65, WPHY70
MSS-SP-75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WHPY 60, WHPY 65, WPHY 70
MSS-SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WHPY-60, WHPY-65, WPHY-70
MSS SP75 WPHY42, WPHY46, WPHY52, WPHY56, WHPY60, WHPY65, WPHY70
MSS SP75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WHPY 60, WHPY 65, WPHY 70
MSSSP75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WHPY-60, WHPY-65, WPHY-70
ASTM A-234 WPB, ASTM A234 WPC, ASTM A234 WPB Seamless, ASTM A234 WPC Seamless
ASTM A-234 WP1, WP11 CL1, WP11 CL3, WP12 CL1, WP22 CL1, WP22 CL3
ASTM A-234 WP5 CL1, WP5 CL3, WP9 CL1, WP9 CL3, WP91
ASTM A-403 WP304, 304L, 304H, 310S, 316, 316L, 316H, 321, 321H, 347, 347H, 317, 317L
ASTM A-420 WPL3, WPL6, WPL8, WPL9
ASTM A-182 F304, F304L, F304H, F310S, F316, F316L, F316H, F321, F321H, F347, F347H, F348
ASTM A-182 F1, F11, F12, F22, F5, F9, F91, F92
ASTM A-182 F-1, F-11, F-12, F-22, F-5, F-9, F-91, F-92
ASTM A-694 F-42, ASTM A694 F-46, ASTM A694 F-52, ASTM A694 F-56
ASTM A-694 F-60, ASTM A694 F-65, ASTM A694 F-70, ASTM A694 F-80
SAE / AISI Grade 1008, 1010, 1018, 1020, 1025, 1026, 1040, 1045, 1050, 4130, 4140, 4150, 4340
AISI-4130 L-80 according to API-5CT, 75KSI according to API-6A Quenched / Hardened & Tempered
SAE-4130 L-80 according to API-5CT, 75KSI according to API-6A Quenched / Hardened & Tempered
AISI-4140 L-80, P-110 according to API-5CT, API6A, NACE MR-01-75 Quenched / Hardened & Tempered
SAE-4140 L-80, P-110 according to API-5CT, API6A, NACE MR-01-75 Quenched / Hardened & Tempered
Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN 10088 F51
Duplex ASTM A182 Grade F60 / ASME SA182 Grade F60 NACE & Norsok Approved
Duplex SAF2205 SANMAC, URANUS 45N, PREN=33, PREN=34, PREN=35, PREN=36 DIN 1.4462
Duplex-2205 UNS S31803 / UNS S32205 DIN-1.4462 EN 10088-3 PREN = 33, PREN = 34, PREN = 35
Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53
Super Duplex SAF 2507 UNS S32750 DIN 1.4410 EN-10088 URANUS 47N(+) PREN=41 Minimum
Super Duplex UNS S32760 F-55 ASTM A182 F55 SA182 F-55 DIN 1.4501 UNS 32760 F55


Types of ASTM A860 WPHY42 Seamless Bend

Specialized manufacturer of Alloy Steel Flange Bend and Carbon Steel J Bend in Mumbai, view Induction Bending Process, Dimensions and price list
  • 30 Degree 3D Bend
  • 45 Degree 3D Bend
  • 60 Degree 3D Bend
  • 90 Degree 3D Bend
  • 30 Degree 4D Bend
  • 45 Degree 4D Bend
  • 60 Degree 4D Bend
  • 90 Degree 4D Bend
  • 30 Degree 5D Bend
  • 45 Degree 5D Bend
  • 60 Degree 5D Bend
  • 90 Degree 5D Bend
  • 30 Degree 6D Bend
  • 45 Degree 6D Bend
  • 60 Degree 6D Bend
  • 90 Degree 6D Bend
  • 30 Degree 8D Bend
  • 45 Degree 8D Bend
  • 60 Degree 8D Bend
  • 90 Degree 8D Bend
  • 30 degree 10D Bend
  • 45 Degree10D Bend
  • 60 Degree 10D Bend
  • 90 Degree 10D Bend
  • Stainless Steel Bend
  • Stainless Steel U Bend
  • Stainless Steel Long Radius Bend
  • Stainless Steel Piggable Bend
  • Stainless Steel Hot Bend
  • Stainless Steel 3D Bend
  • Stainless Steel 5D Bend
  • Stainless Steel J Bend
  • Stainless Steel Mitered Bend
  • Stainless Steel Customized Bend