Steel Tubes India
Menu
RFQ

SA 213 T11 Tube

Home|SA 213 T11 Tube

UNS K11597 T11 Boiler Tube and ASTM A213 T11 Seamless Tube supplier in Mumbai, India

T11 tube is low ferritic stainless steel of the SA 213 grade. The SA 213 T11 Tube has a composition of 1-1.50% chromium, 0.44-0.65% of molybdenum, and 0.30-0.60%of manganese. Apart from this, it has small concentrations of silicon, carbon, potassium, and sulfur in its concentration. The SA 213 Gr T11 Tubing is designed with excellent corrosion and oxidation resistance properties. The tubing possesses excellent hardness and has sizes of 6.35mm OD and 101.6mm OD. The ASTM A213 T11 Seamless Tube is designed with excellent mechanical properties. These tubes possess a tensile strength of minimum 415Mpa and yield strength of minimum 205Mpa. IBR Certified ASME SA213 T11 Seamless Tubing can be easily elongated by 30% and possess a maximum hardness of 85HRB. These tubing can be availed in beveled, plain, and threaded tubing ends. The SA213 T11 material is widely used in various chemical industries, food processing, oil and gas transportation systems, pharmaceuticals equipment, condensers, etc. We are the leading supplier of SA 213 T11 Tube. Our goal is to supply high-quality products at the most reasonable rates for all.

SA 213 T11 Tube

The A213 T11 Hot Finished Tube is rolled or drawn at high temperatures of 2000 degrees C. These tubes have excellent flanging and bending properties and are available in sizes up to 22.5 meters. T11 Steel Cold Drawn Tube is cold rolled after the hot-rolling process. In this process, tubes are enhanced with desired properties and finishes to improve their function in their respective application. The UNS K11597 T11 Boiler Tube can be produced by both hot and cold rolling procedures. These tubes are similar to the austenitic grades of 316 and 304 grade but are produced with enhanced strength and mechanical properties. The EN 10216-2 10CrMo5-5 Boiler Fin Tube is fitted with fins to increase the area in which it can transfer heat. These tubes are easy to maintain and can withstand extreme pressure and temperatures for long periods. The SA 213 T11 Heat Exchanger Tube can be surfaced finished with, Fpe, oil, varnished, concrete coating, galvanized, etc. This gives the tube extra protection in various corrosive mediums. The 1.7338 Furnace Tubes are available in pipe sizes of 1/8 OD to 5 OD. Custom diameter of these tubes are available on request. All our products can be customized including, the SA213 T11 Superheater Tubes, in different chemical compositions, shapes, and sizes as per your requirements.

The Ferritic Low Alloy Steel SA 213 T11 Round Tube sq is available in round, rectangular, hydraulic, and square shapes. The tubing of each shape has its unique function in various applications. Alloy Steel SA 213 T11 Small Bore Tube is easy to install and requires fewer connections. These tubes don’t show pressure drops as no sharp bends are present in the fitting. Apart from that, the tubes are leak-proof and easy to maintain. The Low Alloy A213 T11 Large Diameter Tube is a preferred choice in many applications. These tubes have low alloying elements but, they possess excellent strength and mechanical properties. The ASTM A213 Gr T11 IBR Tube is available in schedules and standard wire gauges of 10 Swg, 12 Swg, 14 Swg, 16 Swg, 18 Swg, 20 Swg, and 3.6 mm Thk. Our experienced workers make use of the best T11 Tube Material along with the latest technology to produce all our products. This is done following all international and national standards. The IBR Approved SA213T11 High Pressure Tube is manufactured following all standards set by the Indian Boiler Regulation. If you have any queries or want to know more about our products or the T11 Boiler Tube, contact us for more information.

Choose the right supplier to provide them with SA 213 T11 Heat Exchanger Tube and A213 T11 Hot Finished Tube at the most competitive price

Table of Content


SA 213 T11 Tube Specification Chart

ASTM A213 Gr T11 IBR Tube and SA 213 Gr T11 Tubing, Check Standard T11 Boiler Tube Material Schedules and Sizes Chart as per ANSI / ASME B36.10M

Size (Seamless) 6.35 to 101.60 mm
Standards ASTM A213, ASME SA213
Equivalent Standards ASTM A335, EN 10216-2, GOST 550-75
Equivalent Material P2, 12ChM, 12CrMo
Type Seamless
Outer Dimensions 6-2500 mm Wall Thickness:1-200mm
Wall Thickness Schedule 3mm to 15mm.
Length max 1~12m
Schedule STD, SCH40, SCH80
Form Round, Square, Rectangular, Hydraulic Etc.
Thickness 3-12mm
Tolerance Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
Craft Cold rolled and Cold drawn
Type Seamless / ERW / Welded / Fabricated
available in Form of Round, Square, Rectangular, Hydraulic Etc.
Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded

ASTM A213 T11 Seamless Tube Diameter

Hot rolled Outside Diameter, mm Tolerance, mm
Outer Diameter≤101.6 +0.4/-0.8
101.6＜Outer Diameter≤190.5 +0.4/-1.2
190.5＜Outer Diameter≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
Outer Diameter＜25.4 ±0.10
25.4≤Outer Diameter≤38.1 ±0.15
38.1＜Outer Diameter＜50.8 ±0.20
50.8≤Outer Diameter＜63.5 ±0.25
63.5≤Outer Diameter＜76.2 ±0.30
76.2≤Outer Diameter≤101.6 ±0.38
101.6＜Outer Diameter≤190.5 +0.38/-0.64
190.5＜Outer Diameter≤228.6 +0.38/-1.14

A213 T11 Hot Finished Tube Wall thickness

Buy ISMT, MSL, Jindal, Bao steel T11 Steel Cold Drawn Tube and SA213 T11 Superheater Tubes at dealer price in Mumbai
Hot rolled Outside Diameter, mm Tolerance, %
Outer Diameter≤101.6, Wall Thickness≤2.4 +40/-0
Outer Diameter≤101.6, 2.4＜Wall Thickness≤3.8 +35/-0
Outer Diameter≤101.6, 3.8＜Wall Thickness≤4.6 +33/-0
Outer Diameter≤101.6, Wall Thickness>4.6 +28/-0
Outer Diameter>101.6, 2.4＜Wall Thickness≤3.8 +35/-0
Outer Diameter>101.6, 3.8＜Wall Thickness≤4.6 +33/-0
Outer Diameter>101.6, Wall Thickness>4.6 +28/-0
Cold Drawn Outside Diameter, mm Tolerance, %
Outer Diameter≤38.1 +20/-0
Outer Diameter>38.1 +22/-0

SA213 T11 Superheater Tubes Chemical Composition

C Mn P S Si Cr Mo
0.15 Maximum 0.30 To 0.60 0.025 Maximum 0.025 Maximum 0.25 To 1.00 8.0 To 10.0 0.90 To 1.10

T11 Steel Cold Drawn Tube Mechanical Properties

View IBR Certified Low Alloy A213 T11 Large Diameter Tube and SA213 T11 material Equivalents, Temperature Range and Density
Tensile Strength Yield Strength Elongation Hardness
415 min 205 min 30 min 179 max

UNS K11597 T11 Boiler Tube Weight

Nominal Pipe Size Pipe Outer Diameter Wall Thickness Pipe Inner Diameter Weight per Foot Standard to XXHY Schedule
Pipe # 		Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
0.147 0.546 1.09 XHY 80 .0478 .0122
0.188 0.464 1.31 160 .0528 .0088
0.294 0.252 1.72 XXHY .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
0.154 0.742 1.48 XHY 80 .0853 .0225
0.219 0.612 1.95 160 .1006 .0153
0.308 0.434 2.44 XXHY .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
0.179 0.957 2.17 XHY 80 .1606 .0374
0.250 0.815 2.85 160 .1904 .0271
0.358 0.599 3.66 XXHY .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
0.191 1.278 3.00 XHY 80 .2913 .0666
0.250 1.160 3.77 160 .3421 .0549
0.382 0.896 5.22 .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
0.200 1.500 3.63 XHY 80 .4118 .0918
0.281 1.338 4.86 160 .5079 .0730
0.400 1.100 6.41 .5977 .0494
2 2.375 0.109 2.157 2.64 10 .4205 .1898
0.154 2.067 3.66 STD 40 .5606 .1743
0.218 1.939 5.03 XHY 80 .7309 .1534
0.250 1.875 5.68 .8045 .1434
0.281 1.813 6.29 .8666 .1344
0.344 1.687 7.47 160 .9806 .1161
0.436 1.503 9.04 XXHY 1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53 10 .6870 .2833
0.203 2.469 5.80 STD. 40 1.0640 .2487
0.216 2.443 6.14 1.1169 .2435
0.250 2.375 7.02 1.2468 .2301
0.276 2.323 7.67 XHY 80 1.3386 .2202
0.375 2.125 10.02 160 1.6371 .1842
0.552 1.771 13.71 XXXHY 1.9971 .1280
3 3.50 0.120 3.260 4.34 1.0411 .4336
0.156 3.188 5.58 1.3122 .4147
0.172 3.156 6.12 1.4265 .4064
0.188 3.124 6.66 1.5342 .3984
0.216 3.068 7.58 STD. 40 1.7241 .3840
0.250 3.000 8.69 1.9372 .3672
0.281 2.938 9.67 2.1207 .3521
0.300 2.900 10.26 XHY 80 2.2253 .3431
0.438 2.624 14.34 160 2.8774 .2811
0.600 2.300 18.6 XXHY 3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98 10 1.3776 .5768
0.226 3.548 9.12 STD. 140 2.3939 .5136
0.250 3.500 10.02 2.6001 .4998
0.281 3.438 11.17 2.8562 .4821
0.318 3.364 12.52 XHY 80 3.1400 .4617
0.636 2..728 22.87 XXHY 4.8795 .3085
4 4.5 0.120 4.260 5.62 10 1.7612 .7404
0.156 4.188 7.24 2.2354 .7156
0.188 4.124 8.67 2.6296 .6942
0.203 4.094 9.32 2.8173 .6838
0.219 4.062 10.02 3.0184 .6725
0.237 4.026 10.80 STD. 40 3.2145 .6613
0.250 4.000 11.36 3.3611 .6528
0.281 3.938 12.67 60 3.7021 .6326
0.312 3.876 13.97 4.0273 .6126
0.337 3.826 15.00 XHY 80 4.2713 .5972
0.438 3.624 19.02 120 5.1790 .5361
0.531 3.438 22.53 160 5.8997 .4822
0.674 3.152 27.57 XXHY 6.7927 .4054
5 5.563 0.188 5.187 10.80 4.1161 1.0979
0.219 5.125 12.51 4.7279 1.0716
0.258 5.047 14.63 STD. 40 5.4500 1.0391
0.281 5.001 15.87 5.8644 1.0204
0.312 4.939 17.51 6.4074 .99647
0.344 4.875 19.19 6.9358 .9696
0.375 4.813 20.80 XHY 80 7.4300 .9449
0.500 4.563 27.06 120 9.2534 .8495
0.625 4.313 32.99 160 10.7976 .7590
0.750 4.063 38.59 XXHY 12.0954 .6734
6 6.625 0.109 6.407 7.59 5 3.5769 1.6748
0.134 6.357 9.30 10 4.3475 1.6488
0.156 6.313 10.79 5.0107 1.6260
0.188 6.249 12.94 5.9351 1.5937
0.203 6.219 13.94 6.3804 1.5780
0.219 6.187 15.00 6.8261 1.5620
0.250 6.125 17.04 7.6905 1.5306
0.280 6.065 18.99 STD. 40 8.4958 1.5008
0.312 6.001 21.06 9.3416 1.4688
0.344 5.937 23.10 10.111 1.4391
0.375 5.875 25.05 10.893 1.4082
0.432 5.761 28.60 XHY 80 12.224 1.3541
0.500 5.625 32.74 13.711 1.2909
0.562 5.501 36.43 120 14.9806 1.2346
0.625 5.375 40.09 16.1821 1.1787
0.719 5.187 45.39 160 17.8243 1.0977
0.864 4.897 53.21 XXHY 20.025 .9784
1.000 4.625 60.13 21.7719 .8727
1.125 4.375 66.14 23.1237 .7809

SA213 T11 Superheater Tubes Size Chart

IBR certified heavy wall thickness Ferritic Low Alloy Steel 1.7338 Furnace Tubes and SA213T11 High Pressure Tube according to American National Standards Institute (ANSI)​
Size Thickness ID Lbs per Foot Price(£)
3/16
0.028 0.132 0.048
7/16
0.028 0.382 0.123 15.12
1/4
0.028 0.194 0.067 8.15
0.035 0.18 0.08 4.52
0.049 0.152 0.105 7.09
0.058 0.134 0.119 16.94
0.065 0.12 0.128 10.73
5/16
0.028 0.257 0.085 9.72
0.035 0.243 0.104 6.71
0.049 0.215 0.138 8.71
0.058 0.197 0.158 8.15
0.065 0.183 0.172 9.90
0.095 0.123 0.221 8.71
3/8
0.028 0.319 0.104 6.59
0.035 0.305 0.127 5.45
0.049 0.277 0.171 5.65
0.058 0.259 0.196 5.45
0.065 0.245 0.215 5.27
0.083 0.209 0.259 9.41
0.095 0.185 0.284 7.51
7/16
0.035 0.368 0.151 5.58
0.049 0.34 0.204 7.15
0.065 0.308 0.259 6.59
0.095 0.248 0.348 9.41
0.12 0.198 0.408 9.47
1/2
0.028 0.444 0.141 6.01
0.035 0.43 0.174 4.82
0.049 0.402 0.236 5.45
0.058 0.384 0.274 4.39
0.065 0.37 0.302 6.84
0.083 0.334 0.37 6.14
0.095 0.31 0.411 9.41
0.12 0.26 0.487 7.49
9/16
0.035 0.493 0.197 10.35
0.049 0.465 0.269 7.02
0.065 0.433 0.346 11.61
0.12 0.323 0.568 11.23
5/8
0.028 0.569 0.179 6.71
0.035 0.555 0.221 5.45
0.049 0.527 0.301 4.95
0.058 0.509 0.351 5.00
0.065 0.495 0.389 8.53
0.095 0.435 0.538 9.90
0.12 0.385 0.647 6.71
0.156 0.313 0.781 12.40
3/4
0.028 0.694 0.216 7.22
0.035 0.68 0.267 4.57
0.049 0.652 0.367 4.19
0.058 0.634 0.429 4.19
0.065 0.62 0.476 5.45
0.095 0.56 0.665 9.41
0.12 0.51 0.807 7.47
0.156 0.438 0.99 9.41
0.188 0.374 1.128 13.23
7/8
0.035 0.805 0.314 4.90
0.049 0.777 0.432 5.96
0.058 0.759 0.506 5.71
0.065 0.745 0.562 6.46
0.083 0.709 0.702 6.21
0.095 0.685 0.791 7.83
0.12 0.635 0.968 9.47
0.188 0.499 1.379 15.68
1
0.035 0.93 0.361 4.95
0.028 0.944 0.291 8.46
0.049 0.902 0.498 4.70
0.058 0.884 0.584 4.64
0.065 0.87 0.649 4.70
0.095 0.81 0.001 5.53
0.12 0.76 1.128 9.41
0.156 0.688 1.406 13.18
0.188 0.624 1.63 15.98
1-1/8
0.035 1.055 0.407 9.90
0.049 1.027 0.563 6.71
0.058 1.009 0.661 5.58
0.065 0.995 0.736 6.71
0.095 0.935 1.045 8.46
0.12 0.885 1.288 14.80
1-1/4
0.035 1.18 0.454 7.02
0.049 1.152 0.629 6.59
0.058 1.134 0.738 8.15
0.065 1.12 0.823 6.71
0.083 1.084 2.132 6.71
0.095 1.06 1.172 7.34
0.12 1.01 1.448 11.03
0.156 0.938 1.823 18.25
1-3/8
0.049 1.277 0.694 8.59
0.035 1.305 0.501 7.40
0.058 1.259 0.816 6.71
0.065 1.245 0.909 5.71
0.095 1.185 1.299 7.22
0.12 1.135 1.609 12.17
0.188 0.999 2.383 16.18
1-1/2
0.035 1.43 0.548 8.46
0.049 1.402 0.759 7.15
0.058 1.384 0.893 8.63
0.065 1.37 0.996 7.47
0.083 1.334 1.256 8.28
0.095 1.31 1.426 8.46
0.12 1.26 1.769 11.03
0.188 1.124 2.634 17.42
1-5/8
0.049 1.527 0.825 12.51
0.058 1.509 0.971 13.18
0.065 1.495 1.083 9.41
0.095 1.435 1.552 12.04
0.12 1.385 1.929 14.67
0.156 1.313 2.447 17.42
0.188 1.249 2.885 18.18
1-3/4
0.049 1.652 0.89 9.85
0.058 1.634 1.048 11.27
0.065 1.62 1.17 10.03
0.095 1.56 1.679 8.71
0.12 1.51 2.089 12.35
0.188 1.374 3.136 19.69
© Steel Tubes India 1994. All Rights Reserved.| Contact Us | Home
MONEL®, INCOLOY® and INCONEL® are registered Trade Marks of Special Metals Corporation. Hastelloy® - Alloy 20 - Duplex - Olets® are the registered trademarks of their respective owners.
Contact Our sales representatives in the following locations
UK | USA | Malaysia | Canada | Australia | Singapore | Philippines | UAE | Iran | Poland | Italy