SA 213 T2 Tube

ASTM A213 T2 Seamless Tube and SA213 T2 material supplier in Mumbai

The T2 tubes of the SA 213 grade are produced following ASTM and ASME standards. The SA 213 T2 Tube has a chemical make-up of chromium, molybdenum, silicon, sulfur, phosphorous, manganese, and carbon. These tubes belong to ferritic alloy, which is highly resistant against all forms of corrosion and oxidation. The SA213 T2 material has good formation properties and is easy to flange and bend. The material used in these tubes has less elasticity but is extremely strong and durable. The Ferritic Low Alloy Steel SA 213 T2 Round Tube is widely used in power generation, heat exchangers, condensers, nuclear reactors, boilers, and other elevated pressure and temperature systems. We are the top SA 213 T2 Tube manufacturers and suppliers in India. Our goal is to produce and supply high-quality products at the most feasible rates.

SA 213 T2 Tube

The ASTM A213 T2 Seamless Tube is produced from a single piece of steel. These tubes possess a tensile strength of a minimum 60Ksi and yield strength of a minimum 30Ksi. They possess an outer diameter of 6.35mm to 101.60mm. The IBR Certified ASME SA213 T2 Seamless Tubing is manufactured following strict standards set by the Indian Boiler Regulation. They are available in thickness of 3mm-12mm, which can be custom designed on request. The A213 T2 Hot Finished Tube is produced after working the tubes at 2000 degrees C. These tubes are extremely strong. They are available with an outside diameter between 101.6mm-228.6mm. The UNS K11547 T2 Boiler Tube can be available in hot-rolled condition up to sizes of 22.5 meters. These tubes are provided with a special coating and treatment to protect against corrosion and deterioration. The SA 213 T2 Heat Exchanger Tube is designed to withstand extreme temperatures of up to 260 degrees C. They can also withstand extreme pressures of nearly 30bar. The SA213 T2 Superheater Tubes are extremely strong and don’t deform easily under any pressures or elevated temperatures. These tubes play an important role in increasing the temperatures of saturated streams. The T2 Steel Cold Drawn Tube can be supplied with sizes up to 25 meters. These pipes have good tolerances of 0.1mm compared to the hot-rolled tubes. Our experienced workers manufacture all our producing using the latest technology and best T2 Tube Material whilst producing all our products.

 

The Low Alloy A213 T2 Large Diameter Tube is designed with considerable strength and enhanced tensile properties. These tubes can be easily availed in round, circular, rectangular, and hydraulic shapes. Alloy Steel SA 213 T2 Small Bore Tube ranges from 3/4mm to 2mm in outer diameter. These tubes don’t require heat or welds to be installed. They are a preferred choice in hazardous areas and compact spaces. IBR Approved SA213T2 High Pressure Tube can be easily elongated by 30%. These high-pressure tubes are designed with a maximum hardness of 85 Rockwell. The ASTM A213 Gr T2 IBR Tube is available in schedules and standard wire gauges of 10 Swg, 12 Swg, 14 Swg, 16 Swg, 18 Swg, 20 Swg, 3.6 mm Thk. The SA 213 Gr T2 Tubing can be easily customized in different shapes and sizes to meet all the requirements of our clients. If you have any questions or want to know more about our products or the T2 Boiler Tube, contact us.

A leading supplier of industrial UNS K11547 T2 Boiler Tube, we offer a wide range of cost effective A213 T2 Hot Finished Tube & SA 213 T2 Heat Exchanger Tube in various sizes


ASTM A213 T2 Seamless Tube Specification

View IBR Certified ASME B36.10M standard SA 213 Gr T2 Boiler Tubing and ASME SA213 T2 Seamless Tubing sizes chart and length in meter


Size (Seamless) 6.35 to 101.60 mm
Standards ASTM A213, ASME SA213
Equivalent Standards ASTM A335, EN 10216-2, GOST 550-75
Material T2, K11547
Equivalent Material P2, 12ChM, 12CrMo
Type Seamless
Outer Dimensions 6-2500 mm Wall Thickness:1-200mm
Wall Thickness Schedule 3mm to 15mm.
Length max 1~12m
Schedule STD, SCH40, SCH80
Form Round, Square, Rectangular, Hydraulic Etc.
Thickness 3-12mm
Tolerance Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
Craft Cold rolled and Cold drawn
Type Seamless / ERW / Welded / Fabricated
available in Form of Round, Square, Rectangular, Hydraulic Etc.
Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded

UNS K11547 T2 Boiler Tube Diameter

Compare our quality and price with other T2 Tube Material and SA213 T2 Superheater Tubes suppliers & stockist in India
Hot rolled Outside Diameter, mm Tolerance, mm
Outer Diameter≤101.6 +0.4/-0.8
101.6<Outer Diameter≤190.5 +0.4/-1.2
190.5<Outer Diameter≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
Outer Diameter<25.4 ±0.10
25.4≤Outer Diameter≤38.1 ±0.15
38.1<Outer Diameter<50.8 ±0.20
50.8≤Outer Diameter<63.5 ±0.25
63.5≤Outer Diameter<76.2 ±0.30
76.2≤Outer Diameter≤101.6 ±0.38
101.6<Outer Diameter≤190.5 +0.38/-0.64
190.5<Outer Diameter≤228.6 +0.38/-1.14

A213 T2 Hot Finished Tube Wall thickness

Hot rolled Outside Diameter, mm Tolerance, %
Outer Diameter≤101.6, Wall Thickness≤2.4 +40/-0
Outer Diameter≤101.6, 2.4<Wall Thickness≤3.8 +35/-0
Outer Diameter≤101.6, 3.8<Wall Thickness≤4.6 +33/-0
Outer Diameter≤101.6, Wall Thickness>4.6 +28/-0
Outer Diameter>101.6, 2.4<Wall Thickness≤3.8 +35/-0
Outer Diameter>101.6, 3.8<Wall Thickness≤4.6 +33/-0
Outer Diameter>101.6, Wall Thickness>4.6 +28/-0
Cold Drawn Outside Diameter, mm Tolerance, %
Outer Diameter≤38.1 +20/-0
Outer Diameter>38.1 +22/-0

SA 213 Gr T2 Tubing Weight

Looking for Low Alloy Steel A213 T2 Round Tube suppliers for boilers? Stockist of A213 T2 Large Diameter Tube and SA213T2 High Pressure Tube in all standard and custom cuts
Nominal Pipe Size Pipe Outer Diameter Wall Thickness Pipe Inner Diameter Weight per Foot Standard to XXHY Schedule
Pipe #
Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
0.147 0.546 1.09 XHY 80 .0478 .0122
0.188 0.464 1.31 160 .0528 .0088
0.294 0.252 1.72 XXHY .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
0.154 0.742 1.48 XHY 80 .0853 .0225
0.219 0.612 1.95 160 .1006 .0153
0.308 0.434 2.44 XXHY .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
0.179 0.957 2.17 XHY 80 .1606 .0374
0.250 0.815 2.85 160 .1904 .0271
0.358 0.599 3.66 XXHY .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
0.191 1.278 3.00 XHY 80 .2913 .0666
0.250 1.160 3.77 160 .3421 .0549
0.382 0.896 5.22 .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
0.200 1.500 3.63 XHY 80 .4118 .0918
0.281 1.338 4.86 160 .5079 .0730
0.400 1.100 6.41 .5977 .0494
2 2.375 0.109 2.157 2.64 10 .4205 .1898
0.154 2.067 3.66 STD 40 .5606 .1743
0.218 1.939 5.03 XHY 80 .7309 .1534
0.250 1.875 5.68 .8045 .1434
0.281 1.813 6.29 .8666 .1344
0.344 1.687 7.47 160 .9806 .1161
0.436 1.503 9.04 XXHY 1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53 10 .6870 .2833
0.203 2.469 5.80 STD. 40 1.0640 .2487
0.216 2.443 6.14 1.1169 .2435
0.250 2.375 7.02 1.2468 .2301
0.276 2.323 7.67 XHY 80 1.3386 .2202
0.375 2.125 10.02 160 1.6371 .1842
0.552 1.771 13.71 XXXHY 1.9971 .1280
3 3.50 0.120 3.260 4.34 1.0411 .4336
0.156 3.188 5.58 1.3122 .4147
0.172 3.156 6.12 1.4265 .4064
0.188 3.124 6.66 1.5342 .3984
0.216 3.068 7.58 STD. 40 1.7241 .3840
0.250 3.000 8.69 1.9372 .3672
0.281 2.938 9.67 2.1207 .3521
0.300 2.900 10.26 XHY 80 2.2253 .3431
0.438 2.624 14.34 160 2.8774 .2811
0.600 2.300 18.6 XXHY 3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98 10 1.3776 .5768
0.226 3.548 9.12 STD. 140 2.3939 .5136
0.250 3.500 10.02 2.6001 .4998
0.281 3.438 11.17 2.8562 .4821
0.318 3.364 12.52 XHY 80 3.1400 .4617
0.636 2..728 22.87 XXHY 4.8795 .3085
4 4.5 0.120 4.260 5.62 10 1.7612 .7404
0.156 4.188 7.24 2.2354 .7156
0.188 4.124 8.67 2.6296 .6942
0.203 4.094 9.32 2.8173 .6838
0.219 4.062 10.02 3.0184 .6725
0.237 4.026 10.80 STD. 40 3.2145 .6613
0.250 4.000 11.36 3.3611 .6528
0.281 3.938 12.67 60 3.7021 .6326
0.312 3.876 13.97 4.0273 .6126
0.337 3.826 15.00 XHY 80 4.2713 .5972
0.438 3.624 19.02 120 5.1790 .5361
0.531 3.438 22.53 160 5.8997 .4822
0.674 3.152 27.57 XXHY 6.7927 .4054
5 5.563 0.188 5.187 10.80 4.1161 1.0979
0.219 5.125 12.51 4.7279 1.0716
0.258 5.047 14.63 STD. 40 5.4500 1.0391
0.281 5.001 15.87 5.8644 1.0204
0.312 4.939 17.51 6.4074 .99647
0.344 4.875 19.19 6.9358 .9696
0.375 4.813 20.80 XHY 80 7.4300 .9449
0.500 4.563 27.06 120 9.2534 .8495
0.625 4.313 32.99 160 10.7976 .7590
0.750 4.063 38.59 XXHY 12.0954 .6734
6 6.625 0.109 6.407 7.59 5 3.5769 1.6748
0.134 6.357 9.30 10 4.3475 1.6488
0.156 6.313 10.79 5.0107 1.6260
0.188 6.249 12.94 5.9351 1.5937
0.203 6.219 13.94 6.3804 1.5780
0.219 6.187 15.00 6.8261 1.5620
0.250 6.125 17.04 7.6905 1.5306
0.280 6.065 18.99 STD. 40 8.4958 1.5008
0.312 6.001 21.06 9.3416 1.4688
0.344 5.937 23.10 10.111 1.4391
0.375 5.875 25.05 10.893 1.4082
0.432 5.761 28.60 XHY 80 12.224 1.3541
0.500 5.625 32.74 13.711 1.2909
0.562 5.501 36.43 120 14.9806 1.2346
0.625 5.375 40.09 16.1821 1.1787
0.719 5.187 45.39 160 17.8243 1.0977
0.864 4.897 53.21 XXHY 20.025 .9784
1.000 4.625 60.13 21.7719 .8727
1.125 4.375 66.14 23.1237 .7809

SA213 T2 Superheater Tubes Size Chart

Size Thickness ID Lbs per Foot Price(£)
3/16
0.028 0.132 0.048
7/16
0.028 0.382 0.123 15.12
1/4
0.028 0.194 0.067 8.15
0.035 0.18 0.08 4.52
0.049 0.152 0.105 7.09
0.058 0.134 0.119 16.94
0.065 0.12 0.128 10.73
5/16
0.028 0.257 0.085 9.72
0.035 0.243 0.104 6.71
0.049 0.215 0.138 8.71
0.058 0.197 0.158 8.15
0.065 0.183 0.172 9.90
0.095 0.123 0.221 8.71
3/8
0.028 0.319 0.104 6.59
0.035 0.305 0.127 5.45
0.049 0.277 0.171 5.65
0.058 0.259 0.196 5.45
0.065 0.245 0.215 5.27
0.083 0.209 0.259 9.41
0.095 0.185 0.284 7.51
7/16
0.035 0.368 0.151 5.58
0.049 0.34 0.204 7.15
0.065 0.308 0.259 6.59
0.095 0.248 0.348 9.41
0.12 0.198 0.408 9.47
1/2
0.028 0.444 0.141 6.01
0.035 0.43 0.174 4.82
0.049 0.402 0.236 5.45
0.058 0.384 0.274 4.39
0.065 0.37 0.302 6.84
0.083 0.334 0.37 6.14
0.095 0.31 0.411 9.41
0.12 0.26 0.487 7.49
9/16
0.035 0.493 0.197 10.35
0.049 0.465 0.269 7.02
0.065 0.433 0.346 11.61
0.12 0.323 0.568 11.23
5/8
0.028 0.569 0.179 6.71
0.035 0.555 0.221 5.45
0.049 0.527 0.301 4.95
0.058 0.509 0.351 5.00
0.065 0.495 0.389 8.53
0.095 0.435 0.538 9.90
0.12 0.385 0.647 6.71
0.156 0.313 0.781 12.40
3/4
0.028 0.694 0.216 7.22
0.035 0.68 0.267 4.57
0.049 0.652 0.367 4.19
0.058 0.634 0.429 4.19
0.065 0.62 0.476 5.45
0.095 0.56 0.665 9.41
0.12 0.51 0.807 7.47
0.156 0.438 0.99 9.41
0.188 0.374 1.128 13.23
7/8
0.035 0.805 0.314 4.90
0.049 0.777 0.432 5.96
0.058 0.759 0.506 5.71
0.065 0.745 0.562 6.46
0.083 0.709 0.702 6.21
0.095 0.685 0.791 7.83
0.12 0.635 0.968 9.47
0.188 0.499 1.379 15.68
1
0.035 0.93 0.361 4.95
0.028 0.944 0.291 8.46
0.049 0.902 0.498 4.70
0.058 0.884 0.584 4.64
0.065 0.87 0.649 4.70
0.095 0.81 0.001 5.53
0.12 0.76 1.128 9.41
0.156 0.688 1.406 13.18
0.188 0.624 1.63 15.98
1-1/8
0.035 1.055 0.407 9.90
0.049 1.027 0.563 6.71
0.058 1.009 0.661 5.58
0.065 0.995 0.736 6.71
0.095 0.935 1.045 8.46
0.12 0.885 1.288 14.80
1-1/4
0.035 1.18 0.454 7.02
0.049 1.152 0.629 6.59
0.058 1.134 0.738 8.15
0.065 1.12 0.823 6.71
0.083 1.084 2.132 6.71
0.095 1.06 1.172 7.34
0.12 1.01 1.448 11.03
0.156 0.938 1.823 18.25
1-3/8
0.049 1.277 0.694 8.59
0.035 1.305 0.501 7.40
0.058 1.259 0.816 6.71
0.065 1.245 0.909 5.71
0.095 1.185 1.299 7.22
0.12 1.135 1.609 12.17
0.188 0.999 2.383 16.18
1-1/2
0.035 1.43 0.548 8.46
0.049 1.402 0.759 7.15
0.058 1.384 0.893 8.63
0.065 1.37 0.996 7.47
0.083 1.334 1.256 8.28
0.095 1.31 1.426 8.46
0.12 1.26 1.769 11.03
0.188 1.124 2.634 17.42
1-5/8
0.049 1.527 0.825 12.51
0.058 1.509 0.971 13.18
0.065 1.495 1.083 9.41
0.095 1.435 1.552 12.04
0.12 1.385 1.929 14.67
0.156 1.313 2.447 17.42
0.188 1.249 2.885 18.18
1-3/4
0.049 1.652 0.89 9.85
0.058 1.634 1.048 11.27
0.065 1.62 1.17 10.03
0.095 1.56 1.679 8.71
0.12 1.51 2.089 12.35
0.188 1.374 3.136 19.69

Chemical Equation of A213 T2 Hot Finished Tube

C Mn P S Si Cr Mo 0.10 To 0.20 0.30 To 0.61 0.025 max 0.025 max 0.10 To 0.30 0.50 To 0.81 0.44 To 0.65

SA213 T2 Superheater Tubes Mechanical Behaviour

Tensile Strength Yield Strength Elongation Hardness
415 Minimum 205 Minimum 30 Minimum 163 maxmium