SA 213 T9 Tube and ASTM A213 T9 Seamless/ Boiler Tubes supplier

ASTM A213 T9 Heat Exchanger Tube and ASME SA 213 T9 Hot Finished Tube supplier in Mumbai

SA 213 is a seamless austenitic alloy, which is used in high-temperature and pressure systems. The SA 213 T9 Tube is produced with excellent chemical composition of carbon, manganese, chromium, molybdenum, potassium, sulfur, and silicon. These tubes possess a good hardness of 89 Rockwell. The T9 Tube Material, which is used to produce most products in the T9 grade, are highly resistant to corrosion and oxidation. These tubes possess excellent tear and fatigue resistance properties. The ASTM A213 T9 Seamless Tube is very strong as it is manufactured using a billet and is singular in nature. These tubes are designed with a tensile strength of 415Mpa and possess yield strength of 205Mpa. The ASTM A213 Gr T9 IBR Tube is manufactured following all dimensions, pressures, grades, and standards, which are set by the Indian Boiler Regulation. The SA 213 Gr T9 Tubing is widely used in water supply, shipbuilding, metallurgy, construction, chemical industries, power plants, gas, oil refineries, etc. We are the leading stockist of the SA 213 T9 Tube in India. We keep stock of top-quality products, which are available at reasonable rates.

The A213 T9 Hot Finished Tube is produced after rolling at extreme temperatures. These pipes are available in sizes up to 22.5 meters, which can be customized on request. The SA 213 T9 Heat Exchanger Tube is designed with good strength and enhanced thermal capacities. These tubes can be availed in standard plain, beveled, and threaded tubing ends. With a wall thickness of 3mm-15mm, the T9 Boiler Tube is used to produce steam by heating water in industrial boilers. These tubes are coated or annealed to give them extra protection against oxidation and corrosion. SA213 T9 Superheater Tubes have excellent tolerances against extreme pressure and temperatures. They can withstand temperatures up to 260 degrees C and pressures up to 30 bar. The T9 Steel Cold Drawn Tube is produced after the hot-rolling process. These tubes possess enhanced tolerances compared to the hot-drawn pipes. They are available in sizes up to 25 meters. Our experienced workers make use of the best SA213 T9 material and the latest technology while producing all our products.

Low Alloy A213 T9 Large Diameter Tube is designed with 1-5% alloying elements. These low alloys give it exceptional strength and mechanical properties. The Alloy Steel SA 213 T9 Small Bore Tube is either 2 inches or less in size. These tubes are generally used in relief lines and sewage treatment lines, which are difficult to access. The IBR Certified ASME SA213 T9 Seamless Tubing can be easily elongated by a minimum of 30% and still have excellent workability. They are available in sizes of 6.35mm OD and 101.60mm OD. IBR Approved SA213T9 High Pressure Tube is available in schedules of STD, SCH 40, and SCH 80. These tubes are available in round, hydraulic, rectangular, and square shapes. All our products including, the Ferritic Low Alloy Steel SA 213 T9 Round Tube, can be customized in different shapes and sizes to meet the requirements of all our clients. If you have any queries or want to know about the UNS S50400 T9 Boiler Tube, contact us.

Broad range of ANSI/ ASME B36.10M UNS S50400 T9 Boiler Tube and ASTM A213 T9 Seamless Tube in various sizes and schedule

Table of Content

SA 213 T9 Tube Specification list
ASTM A213 T9 Seamless Tube Diameter
UNS S50400 T9 Boiler Tube Wall thickness
A213 T9 Hot Finished Tube Weight
SA 213 Gr T9 Tubing Size Chart
T9 Steel Cold Drawn Tube Chemical Composition
ASTM A213 Gr T9 IBR Tube Mechanical Properties

SA 213 T9 Tube Specification list

Huge inventory of T9 Steel Cold Drawn Tube, T9 Tube Material and SA 213 Gr T9 Tubing in Mumbai

Size (Seamless)	6.35 to 101.60 mm
Standards	ASTM A213, ASME SA213
Equivalent Standards	ASTM A335, EN 10216-2, GOST 550-75
Equivalent Material	P2, 12ChM, 12CrMo
Type	Seamless
Outer Dimensions	6-2500 mm Wall Thickness:1-200mm
Wall Thickness	Schedule 3mm to 15mm.
Length	max 1~12m
Schedule	STD, SCH40, SCH80
Form	Round, Square, Rectangular, Hydraulic Etc.
Thickness	3-12mm
Tolerance	Cold drawn pipe: +/-0.1mm Cold rolled pipe: +/-0.05mm
Craft	Cold rolled and Cold drawn
Type	Seamless / ERW / Welded / Fabricated
available in Form of	Round, Square, Rectangular, Hydraulic Etc.
Length	Single Random, Double Random & Cut Length.
End	Plain End, Beveled End, Treaded

ASTM A213 T9 Seamless Tube Diameter

Hot rolled	Outside Diameter, mm	Tolerance, mm
	Outer Diameter≤101.6	+0.4/-0.8
	101.6＜Outer Diameter≤190.5	+0.4/-1.2
	190.5＜Outer Diameter≤228.6	+0.4/-1.6
Cold Drawn	Outside Diameter, mm	Tolerance, mm
	Outer Diameter＜25.4	±0.10
	25.4≤Outer Diameter≤38.1	±0.15
	38.1＜Outer Diameter＜50.8	±0.20
	50.8≤Outer Diameter＜63.5	±0.25
	63.5≤Outer Diameter＜76.2	±0.30
	76.2≤Outer Diameter≤101.6	±0.38
	101.6＜Outer Diameter≤190.5	+0.38/-0.64
	190.5＜Outer Diameter≤228.6	+0.38/-1.14

UNS S50400 T9 Boiler Tube Wall thickness

ASTM A213 Gr T9 IBR Tube and SA213 T9 Superheater Tubes exporter & supplier in India, Genuine Price of ASME SA213 T9 Reheater Tubes & Seamless Tubing in Mumbai

Hot rolled	Outside Diameter, mm	Tolerance, %
	Outer Diameter≤101.6, Wall Thickness≤2.4	+40/-0
	Outer Diameter≤101.6, 2.4＜Wall Thickness≤3.8	+35/-0
	Outer Diameter≤101.6, 3.8＜Wall Thickness≤4.6	+33/-0
	Outer Diameter≤101.6, Wall Thickness>4.6	+28/-0
	Outer Diameter>101.6, 2.4＜Wall Thickness≤3.8	+35/-0
	Outer Diameter>101.6, 3.8＜Wall Thickness≤4.6	+33/-0
	Outer Diameter>101.6, Wall Thickness>4.6	+28/-0
Cold Drawn	Outside Diameter, mm	Tolerance, %
	Outer Diameter≤38.1	+20/-0
	Outer Diameter>38.1	+22/-0

A213 T9 Hot Finished Tube Weight

Nominal Pipe Size	Pipe Outer Diameter	Wall Thickness	Pipe Inner Diameter	Weight per Foot	Standard to XXHY	Schedule Pipe #	Section Modulus	Gallon Capacity Per Linear Foot
1/2	0.84	0.109	0.622	0.85	STD	40	.0407	.0158
		0.147	0.546	1.09	XHY	80	.0478	.0122
		0.188	0.464	1.31		160	.0528	.0088
		0.294	0.252	1.72	XXHY		.0577	.0026
3/4	1.05	0.113	0.824	1.13	STD	40	.0705	.0277
		0.154	0.742	1.48	XHY	80	.0853	.0225
		0.219	0.612	1.95		160	.1006	.0153
		0.308	0.434	2.44	XXHY		.1103	.0077
1	1.315	0.133	1.049	1.68	STD	40	.1328	.0449
		0.179	0.957	2.17	XHY	80	.1606	.0374
		0.250	0.815	2.85		160	.1904	.0271
		0.358	0.599	3.66	XXHY		.2136	.0146
1 1/4	1.66	0.140	1.380	2.27	STD	40	.2346	.0777
		0.191	1.278	3.00	XHY	80	.2913	.0666
		0.250	1.160	3.77		160	.3421	.0549
		0.382	0.896	5.22			.4110	.0328
1 1/2	1.90	0.145	1.610	2.72	STD	40	.3262	.1058
		0.200	1.500	3.63	XHY	80	.4118	.0918
		0.281	1.338	4.86		160	.5079	.0730
		0.400	1.100	6.41			.5977	.0494
2	2.375	0.109	2.157	2.64		10	.4205	.1898
		0.154	2.067	3.66	STD	40	.5606	.1743
		0.218	1.939	5.03	XHY	80	.7309	.1534
		0.250	1.875	5.68			.8045	.1434
		0.281	1.813	6.29			.8666	.1344
		0.344	1.687	7.47		160	.9806	.1161
		0.436	1.503	9.04	XXHY		1.1043	.0922
2 1/2	2.875	0.120	2.635	3.53		10	.6870	.2833
		0.203	2.469	5.80	STD.	40	1.0640	.2487
		0.216	2.443	6.14			1.1169	.2435
		0.250	2.375	7.02			1.2468	.2301
		0.276	2.323	7.67	XHY	80	1.3386	.2202
		0.375	2.125	10.02		160	1.6371	.1842
		0.552	1.771	13.71	XXXHY		1.9971	.1280
3	3.50	0.120	3.260	4.34			1.0411	.4336
		0.156	3.188	5.58			1.3122	.4147
		0.172	3.156	6.12			1.4265	.4064
		0.188	3.124	6.66			1.5342	.3984
		0.216	3.068	7.58	STD.	40	1.7241	.3840
		0.250	3.000	8.69			1.9372	.3672
		0.281	2.938	9.67			2.1207	.3521
		0.300	2.900	10.26	XHY	80	2.2253	.3431
		0.438	2.624	14.34		160	2.8774	.2811
		0.600	2.300	18.6	XXHY		3.4243	.2158
3 1/2	4.0	0.120	3.760	4.98		10	1.3776	.5768
		0.226	3.548	9.12	STD.	140	2.3939	.5136
		0.250	3.500	10.02			2.6001	.4998
		0.281	3.438	11.17			2.8562	.4821
		0.318	3.364	12.52	XHY	80	3.1400	.4617
		0.636	2..728	22.87	XXHY		4.8795	.3085
4	4.5	0.120	4.260	5.62		10	1.7612	.7404
		0.156	4.188	7.24			2.2354	.7156
		0.188	4.124	8.67			2.6296	.6942
		0.203	4.094	9.32			2.8173	.6838
		0.219	4.062	10.02			3.0184	.6725
		0.237	4.026	10.80	STD.	40	3.2145	.6613
		0.250	4.000	11.36			3.3611	.6528
		0.281	3.938	12.67		60	3.7021	.6326
		0.312	3.876	13.97			4.0273	.6126
		0.337	3.826	15.00	XHY	80	4.2713	.5972
		0.438	3.624	19.02		120	5.1790	.5361
		0.531	3.438	22.53		160	5.8997	.4822
		0.674	3.152	27.57	XXHY		6.7927	.4054
5	5.563	0.188	5.187	10.80			4.1161	1.0979
		0.219	5.125	12.51			4.7279	1.0716
		0.258	5.047	14.63	STD.	40	5.4500	1.0391
		0.281	5.001	15.87			5.8644	1.0204
		0.312	4.939	17.51			6.4074	.99647
		0.344	4.875	19.19			6.9358	.9696
		0.375	4.813	20.80	XHY	80	7.4300	.9449
		0.500	4.563	27.06		120	9.2534	.8495
		0.625	4.313	32.99		160	10.7976	.7590
		0.750	4.063	38.59	XXHY		12.0954	.6734
6	6.625	0.109	6.407	7.59		5	3.5769	1.6748
		0.134	6.357	9.30		10	4.3475	1.6488
		0.156	6.313	10.79			5.0107	1.6260
		0.188	6.249	12.94			5.9351	1.5937
		0.203	6.219	13.94			6.3804	1.5780
		0.219	6.187	15.00			6.8261	1.5620
		0.250	6.125	17.04			7.6905	1.5306
		0.280	6.065	18.99	STD.	40	8.4958	1.5008
		0.312	6.001	21.06			9.3416	1.4688
		0.344	5.937	23.10			10.111	1.4391
		0.375	5.875	25.05			10.893	1.4082
		0.432	5.761	28.60	XHY	80	12.224	1.3541
		0.500	5.625	32.74			13.711	1.2909
		0.562	5.501	36.43		120	14.9806	1.2346
		0.625	5.375	40.09			16.1821	1.1787
		0.719	5.187	45.39		160	17.8243	1.0977
		0.864	4.897	53.21	XXHY		20.025	.9784
		1.000	4.625	60.13			21.7719	.8727
		1.125	4.375	66.14			23.1237	.7809

SA 213 Gr T9 Tubing Size Chart

Size	Thickness	ID	Lbs per Foot	Price(£)
3/16
	0.028	0.132	0.048
7/16
	0.028	0.382	0.123	15.12
1/4
	0.028	0.194	0.067	8.15
	0.035	0.18	0.08	4.52
	0.049	0.152	0.105	7.09
	0.058	0.134	0.119	16.94
	0.065	0.12	0.128	10.73
5/16
	0.028	0.257	0.085	9.72
	0.035	0.243	0.104	6.71
	0.049	0.215	0.138	8.71
	0.058	0.197	0.158	8.15
	0.065	0.183	0.172	9.90
	0.095	0.123	0.221	8.71
3/8
	0.028	0.319	0.104	6.59
	0.035	0.305	0.127	5.45
	0.049	0.277	0.171	5.65
	0.058	0.259	0.196	5.45
	0.065	0.245	0.215	5.27
	0.083	0.209	0.259	9.41
	0.095	0.185	0.284	7.51
7/16
	0.035	0.368	0.151	5.58
	0.049	0.34	0.204	7.15
	0.065	0.308	0.259	6.59
	0.095	0.248	0.348	9.41
	0.12	0.198	0.408	9.47
1/2
	0.028	0.444	0.141	6.01
	0.035	0.43	0.174	4.82
	0.049	0.402	0.236	5.45
	0.058	0.384	0.274	4.39
	0.065	0.37	0.302	6.84
	0.083	0.334	0.37	6.14
	0.095	0.31	0.411	9.41
	0.12	0.26	0.487	7.49
9/16
	0.035	0.493	0.197	10.35
	0.049	0.465	0.269	7.02
	0.065	0.433	0.346	11.61
	0.12	0.323	0.568	11.23
5/8
	0.028	0.569	0.179	6.71
	0.035	0.555	0.221	5.45
	0.049	0.527	0.301	4.95
	0.058	0.509	0.351	5.00
	0.065	0.495	0.389	8.53
	0.095	0.435	0.538	9.90
	0.12	0.385	0.647	6.71
	0.156	0.313	0.781	12.40
3/4
	0.028	0.694	0.216	7.22
	0.035	0.68	0.267	4.57
	0.049	0.652	0.367	4.19
	0.058	0.634	0.429	4.19
	0.065	0.62	0.476	5.45
	0.095	0.56	0.665	9.41
	0.12	0.51	0.807	7.47
	0.156	0.438	0.99	9.41
	0.188	0.374	1.128	13.23
7/8
	0.035	0.805	0.314	4.90
	0.049	0.777	0.432	5.96
	0.058	0.759	0.506	5.71
	0.065	0.745	0.562	6.46
	0.083	0.709	0.702	6.21
	0.095	0.685	0.791	7.83
	0.12	0.635	0.968	9.47
	0.188	0.499	1.379	15.68
1
	0.035	0.93	0.361	4.95
	0.028	0.944	0.291	8.46
	0.049	0.902	0.498	4.70
	0.058	0.884	0.584	4.64
	0.065	0.87	0.649	4.70
	0.095	0.81	0.001	5.53
	0.12	0.76	1.128	9.41
	0.156	0.688	1.406	13.18
	0.188	0.624	1.63	15.98
1-1/8
	0.035	1.055	0.407	9.90
	0.049	1.027	0.563	6.71
	0.058	1.009	0.661	5.58
	0.065	0.995	0.736	6.71
	0.095	0.935	1.045	8.46
	0.12	0.885	1.288	14.80
1-1/4
	0.035	1.18	0.454	7.02
	0.049	1.152	0.629	6.59
	0.058	1.134	0.738	8.15
	0.065	1.12	0.823	6.71
	0.083	1.084	2.132	6.71
	0.095	1.06	1.172	7.34
	0.12	1.01	1.448	11.03
	0.156	0.938	1.823	18.25
1-3/8
	0.049	1.277	0.694	8.59
	0.035	1.305	0.501	7.40
	0.058	1.259	0.816	6.71
	0.065	1.245	0.909	5.71
	0.095	1.185	1.299	7.22
	0.12	1.135	1.609	12.17
	0.188	0.999	2.383	16.18
1-1/2
	0.035	1.43	0.548	8.46
	0.049	1.402	0.759	7.15
	0.058	1.384	0.893	8.63
	0.065	1.37	0.996	7.47
	0.083	1.334	1.256	8.28
	0.095	1.31	1.426	8.46
	0.12	1.26	1.769	11.03
	0.188	1.124	2.634	17.42
1-5/8
	0.049	1.527	0.825	12.51
	0.058	1.509	0.971	13.18
	0.065	1.495	1.083	9.41
	0.095	1.435	1.552	12.04
	0.12	1.385	1.929	14.67
	0.156	1.313	2.447	17.42
	0.188	1.249	2.885	18.18
1-3/4
	0.049	1.652	0.89	9.85
	0.058	1.634	1.048	11.27
	0.065	1.62	1.17	10.03
	0.095	1.56	1.679	8.71
	0.12	1.51	2.089	12.35
	0.188	1.374	3.136	19.69

T9 Steel Cold Drawn Tube Chemical Composition

Searching Low Alloy A213 T9 Large Diameter Tube suppliers for regular requirements? Find you size of SA213T9 High Pressure Tube and SA213 T9 material in our online inventory at better price

C	Mn	P	S	Si	Cr	Mo
0.15 Maximum	0.30 To 0.60	0.025 Maximum	0.025 Maximum	0.25 To 1.00	8.0 To 10.0	0.90 To 1.10

ASTM A213 Gr T9 IBR Tube Mechanical Properties

Tensile Strength	Yield Strength	Elongation	Hardness
415 min	205 min	30 min	179 max