Schedule 10 Steel Pipe and ANSI Sch 10 dimensions/ weight/ price

Check and wall thickness, weight chart & pressure rating of SCH 10 Pipes and Tubes

There are a variety of stainless steel products that are categorized into schedules depending upon their specific properties. Schedule 10 Steel Pipes is one such lower schedule pipes that has lower pressure capacities. The length, diameter, and thickness of these pipes depend upon the ATM, API, and ASME standards. The schedule 10 steel pipes dimensions include the outer and the inner diameter. The outer diameter ranges between 21.3 mm to 762 mm the material used in sch 10 pipes differs and they are widely used in 304 grade. This is due to the cost-effectiveness. The strength of 304 and 316 grade of pipes is said to be similar however the resistance to corrosion differs widely.

sch 10 pipe thickness is lower hence they cannot withstand high pressure. To maintain the necessary pressure capacities the sch 10 pipes dimensions also vary as per their grade. For instance, a normal size pipes of ⅛ size that is 0.41 inches in outer diameter and weighs 0.28 metric cube will have ansch 10 pipe thickness in mm of 1.24 this be because the pressure grade depends upon the outer diameter, schedule 10 pipe wall thickness, and the weight.

Similarly, a 2-inch pipes with an outer diameter of 2.37 inches and weight of 2.07 will have a schedule 10 pipe thickness in mm of 2.77.

One might wonder how thick is schedule 10 pipe is. This can be clarified from the table below

If a pipe is 3 inches in size, and the sch 10 pipe dimensions in mm or the outer diameter are 88.9 with schedule 10 thickness of walls at 5.01 mm then the schedule 10 pipes weight would be 6.6.

schedule 10 pipe thickness increases with the increase in the schedule 10 pipe dimensions. Applications such as water lines in commercial, domestic, and industrial sectors, paper and pulp industries, seawater desalination use these schedule 10 pipes. Moreover, oil and gas industries, heat exchangers, petroleum industries are also catered to by the Schedule 10 Steel Pipe suppliers.

Supplier of Schedule 10 Carbon & Alloy Steel Pipe Sizes as per ANSI B36.10

Schedule 10 pipes thickness in mm

Exporter, stockist & supplier of SCH 10 Pipe in ASTM/ ASME SA 106/ SA 53 Gr B, API 5L, A333 Grade 6, A335 P22/P5/ P11/ P9 in India

O.D., I.D., & Wall Thickness Dimensions For Given Pipe Sizes
Pipe Size	Schedule 10 Thickness
Pipe Size	O.D.	I.D.	Wall Thickness
3/4	1.050	0.884	0.083
1	1.315	1.097	0.109
1-1/4	1.660	1.442	0.109
1-1/2	1.900	1.682	0.109
2	2.375	2.157	0.109
2-1/2	2.875	2.635	0.120
3	3.500	3.260	0.120
3-1/2	4.000	3.760	0.120
4	4.500	4.260	0.120
6	6.625	6.357	0.134
8	8.625	8.329	0.148

Schedule 10 pipe dimensions

Pipes Size*	O.D. (in.)	Schedule (10, 40, 80) Wall Thickness (in.)**
		Sch.10
		Wall (in)	I.D. (in)

1/8"	0.41 od	0.049 in	0.312 id
Weight (lbs/ft.)	Steel	0.183 lbs/ft
	Stainless	0.183 lbs/ft
	Aluminum
1/4"	0.54 od	0.065 in	0.410 id
Weight (lbs/ft.)	Steel	0.333 lbs/ft
	Stainless	0.333 lbs/ft
	Aluminum
3/8"	0.675 od	0.065 in	0.545 id
Weight (lbs/ft.)	Steel	0.420 lbs/ft
	Stainless	0.420 lbs/ft
	Aluminum
1/2"	0.840 od	0.083 in	0.674 id
Weight (lbs/ft.)	Steel	0.670 lbs/ft
	Stainless	0.670 lbs/ft
	Aluminum
3/4"	1.050 od	0.083 in	0.884 id
Weight (lbs/ft.)	Steel	0.86 lbs/ft
	Stainless	0.86 lbs/ft
	Aluminum
1"	1.315 od	0.109 in	1.097 id
Weight (lbs/ft.)	Steel	1.41 lbs/ft
	Stainless	1.41 lbs/ft
	Aluminum	0.481 lbs/ft
1-1/4"	1.66 od	0.109 in	1.442 id
Weight (lbs/ft.)	Steel	1.81 lbs/ft
	Stainless	1.81 lbs/ft
	Aluminum	0.618 lbs/ft
1-1/2"	1.90 od	0.109 in	1.682 id
Weight (lbs/ft.)	Steel	2.09 lbs/ft
	Stainless	2.09 lbs/ft
	Aluminum	0.714 lbs/ft
2"	2.375 od	0.109 in	2.157 id
Weight (lbs/ft.)	Steel	2.64 lbs/ft
	Stainless	2.64 lbs/ft
	Aluminum	0.903 lbs/ft
2-1/2"	2.875 od	0.120 in	2.635 id
Weight (lbs/ft.)	Steel	3.53 lbs/ft
	Stainless	3.53 lbs/ft
	Aluminum	1.209 lbs/ft
3"	3.50 od	0.120 in	3.26 id
Weight (lbs/ft.)	Steel	4.34 lbs/ft
	Stainless	4.34 lbs/ft
	Aluminum	1.483 lbs/ft
3-1/2"	4.00 od	0.120 in	3.76 id
Weight (lbs/ft.)	Steel	4.98 lbs/ft
	Stainless	4.98 lbs/ft
	Aluminum
4"	4.50 od	0.120 in	4.26 id
Weight (lbs/ft.)	Steel	5.62 lbs/ft
	Stainless	5.62 lbs/ft
	Aluminum	1.922 lbs/ft
5"	5.563 od	0.134 in	5.295 id
Weight (lbs/ft.)	Steel	7.78 lbs/ft
	Stainless	7.78 lbs/ft
	Aluminum	2.660 lbs/ft
6"	6.625 od	0.134 in	6.357 id
Weight (lbs/ft.)	Steel	9.30 lbs/ft
	Stainless	9.30 lbs/ft
	Aluminum	3.181 lbs/ft
8"	8.625 od	0.148 in	8.329 id
Weight (lbs/ft.)	Steel	13.41 lbs/ft
	Stainless	13.41 lbs/ft
	Aluminum

Schedule 10 pipes weight

Nominal size [inches]	Outside diameter [inches]	Outside diameter [mm]	Wall thickness [inches]	Wall thickness [mm]	Weight [lb/ft]	Weight [kg/m]
1/8 inches	0.405 inches	10.3 MM	0.068 inches	1.73 MM	0.24 lb/ft	0.37 kg/m
1/4 inches	0.540 inches	13.7 MM	0.088 inches	2.24 MM	0.42 lb/ft	0.84 kg/m
1/2 inches	0.840 inches	21.3 MM	0.109 inches	2.77 MM	0.85 lb/ft	1.27 kg/m
3/4 inches	1.050 inches	26.7 MM	0.113 inches	2.87 MM	1.13 lb/ft	1.69 kg/m
1 inches	1.315 inches	33.4 MM	0.133 inches	3.38 MM	1.68 lb/ft	2.50 kg/m
1 1/4 inches	1.660 inches	42.2 MM	0.140 inches	3.56 MM	2.27 lb/ft	3.39 kg/m
1 1/2 inches	1.900 inches	48.3 MM	0.145 inches	3.68 MM	2.72 lb/ft	4.05 kg/m
2 inches	2.375 inches	60.3 MM	0.154 inches	3.91 MM	3.65 lb/ft	5.44 kg/m
2 1/2 inches	2.875 inches	73.0 MM	0.203 inches	5.16 MM	5.79 lb/ft	8.63 kg/m
3 inches	3.500 inches	88.9 MM	0.216 inches	5.49 MM	7.58 lb/ft	11.29 kg/m
3 1/2 inches	4.000 inches	101.6 MM	0.226 inches	5.74 MM	9.11 lb/ft	13.57 kg/m
4 inches	4.500 inches	114.3 MM	0.237 inches	6.02 MM	10.79 lb/ft	16.07 kg/m
5 inches	5.563 inches	141.3 MM	0.258 inches	6.55 MM	14.62 lb/ft	21.77 kg/m
6 inches	6.625 inches	168.3 MM	0.280 inches	7.11 MM	18.97 lb/ft	28.26 kg/m
8 inches	8.625 inches	219.1 MM	0.322 inches	8.18 MM	28.55 lb/ft	42.55 kg/m
10 inches	10.750 inches	273.0 MM	0.365 inches	9.27 MM	40.48 lb/ft	60.31 kg/m
12 inches	12.750 inches	323.8 MM	0.406 inches	10.31 MM	53.52 lb/ft	79.73 kg/m
14 inches	14 inches	355.6 MM	0.375 inches	11.13 MM	54.57 lb/ft	94.55 kg/m
16 inches	16 inches	406.4 MM	0.500 inches	12.70 MM	82.77 lb/ft	123.30 kg/m
18 inches	18 inches	457.0 MM	0.562 inches	14.27 MM	104.67 lb/ft	155.80 kg/m
20 inches	20 inches	508.0 MM	0.594 inches	15.09 MM	123.11 lb/ft	183.42 kg/m
24 inches	24 inches	610.0 MM	0.688 inches	17.48 MM	171.29 lb/ft	255.41 kg/m
32 inches	32 inches	813.0 MM	0.688 inches	17.48 MM	230.08 lb/ft	342.91 kg/m

Pressure rating of Schedule 10 pipes

Wide stock of Schedule 10 Seamless Pipe in Mumbai, India, Ask for a free sample now! View latest price list

Maximum Allowable Pressure (psi) (kPa)
NPS	Outside Diameter	Schedule
(in)	(in) (mm)	10
1/4	0.54 13.7
3/8	0.675 17.1
1/2	0.84 21.3
3/4	1.05 26.7
1	1.315 33.4
1 1/4	1.66 42.2
1 1/2	1.9 48.3
2	2.375 60.3
2 1/2	2.875 73
3	3.5 88.9
3 1/2	4 102
4	4.5 114
5	5.563 141
6	6.625 168
8	8.625 219
10	10.75 273
12	12.75 324
14	14 356	875 6033
16	16 406	766 5282
18	18 457	681 4695
20	20 508	613 4227
22	22 559	557 3841
24	24 610	510 3516
30	30 762	510 3516
32	32 813	478 3296
34	34 864	450 3103
36	36 914	425 2930
42	42 1067

SCH 10 pipes Dealers

Authorised Dealer & distributor of Jindal Star in India

Schedule 10 Steel Pipes Price List

Supplier & distributor of Schedule 10 ERW Pipes in Mumbai, buy ANSI SCH 10 Welded Line Pipe at factory price in India

SIZE INCH	SIZE Nominal Bore	MSL PRICE LIST	ISMT PRICE LIST	JSL PRICE LIST	USL PRICE LIST	BAO PRICE LIST	Lontrin PRICE LIST	SMTM PRICE LIST	TNRS PRICE LIST	V&M PRICE LIST	Wuxi PRICE LIST

1/2	15	1,323.53	1,316.18	1,330.88	-	1,029.41	1,036.76	1,460.59	1,396.06	1,425.47	1,012.06
3/4	20	1,102.94	1,095.59	1,110.29	-	954.88	963.24	1,250.00	1,176.47	1,205.88	938.53
1	25	945.88	948.53	963.24	-	881.35	889.71	1,102.94	1,029.41	1,058.82	875.00
1.25	32	901.76	904.41	919.12	-	851.94	860.29	1,058.82	985.29	1,014.71	845.59
1.5	40	808.82	801.47	816.18	-	807.82	816.18	955.88	882.35	911.76	801.47
2	50	784.12	786.76	801.47	-	617.65	625.00	941.18	867.65	897.06	610.29
2.5	65	784.12	786.76	801.47	-	617.65	625.00	941.18	867.65	897.06	610.29
3	80	794.12	786.76	801.47	-	617.65	625.00	941.18	867.65	897.06	610.29
3.5	90	794.12	786.76	801.47	-	617.65	625.00	941.18	867.65	897.06	610.29
4	100	794.12	786.76	801.47	735.29	617.65	625.00	941.18	867.65	897.06	610.29
5	125	794.12	786.76	801.47	735.29	617.65	625.00	941.18	867.65	897.06	610.29
6	150	794.12	786.76	801.47	735.29	617.65	625.00	941.18	867.65	897.06	610.29
8	200	794.12	786.76	801.47	735.29	647.06	654.41	941.18	867.65	897.06	639.71
10	250	794.12	786.76	-	735.29	647.06	654.41	941.18	867.65	897.06	639.71
12	300	852.94	-	-	735.29	647.06	654.41	1,000.00	926.47	955.88	639.71
14	350	852.94	-	-	735.29	661.76	669.12	1,000.00	926.47	955.88	654.41
16	400	882.35	-	-	-	661.76	669.12	1,029.41	955.88	985.29	654.41
18	450	882.35	-	-	-	676.47	683.82	1,029.41	955.88	985.29	669.12
20	500	882.35	-	-	-	676.47	683.82	1,029.41	955.88	985.29	669.12
22	550	-	-	-	-	705.88	713.24	1,176.47	1,029.41	1,132.35	698.53
24	600	-	-	-	-	705.88	713.24	1,176.47	1,029.41	1,132.35	698.53

Above Price is USD $/Ton Additional Price Factors
Fix length Cost:	5% Extra
Double Random Length Cost:	2% Extra
Hot Dip Galvanising Cost	400$/Tons
3LPE	300$/tons
Inspection	2% Extra

SCH 10 pipes Size Chart

NPS	1/2	3/4	1	1¼	1½	2	2½	3	3½	4
DN	15	20	25	32	40	50	65	80	90	100