ASTM A240 304L Plate and SS 304L Coil supplier in India
Stainless steel is used to produce various products and is available in various grades. 304 is one such grade. Sheets made with the low carbon version of this grade are known as Stainless Steel 304L Sheet. They are one of the most common and versatile 18-8 austenitic grades. Stainless Steel 304L Plate is resistant to corrosion and is used for a wide range of applications. ASTM A240 Type 304L has nitrogen added to it in trace amounts which help it to maintain the mechanical properties of 304. SA240 304L resists atmospheric corrosion, reducing and oxidizing the environment. In welded condition, these 304L Stainless Steel Sheets also resist intergranular corrosion.
ASTM A240 304L also displays excellent toughness and strength in cryogenic temperature. In the annealed condition this 304L Stainless Steel Coil is non-magnetic. However cold working and welding can make 304L Stainless Steel Strip magnetic. A conventional welding process can be used to weld the SS 304L Shim. Applications such as medical, food and processing, pharmaceutical, power generations, pulp and paper, and chemical use Stainless Steel 304L Clad Plate. The high chromium content of A240 Tp304L Flat Sheet displays resistance to oxidizing solutions such as nitric acid up to 176 degrees C. 304L 2B Flat Shim can also resist organic acids such as acetic acid.
CRES 304L Rolling Plate can also operate successfully in caustic solutions that are free of chlorides and fluorides. One of the drawbacks of SA 240 GR 304L Strips is that they do not perform well in a sulfuric acid environment. Moreover, DIN 1.4307 Coil Sheet is not recommended in the marine environment. 304L SS Rolling Sheets have a hot forming working temperature of 1652 degrees F to 2102 degrees F. whereas the Cold rolled UNS S30403 Plate are said to be ductile and magnetic in nature. Cold forming makes these 1.4307 Stainless Steel Shim Stock strong and hard.
AISI 304L Hot rolled Plates do not require post weld heat treatment and can be used directly. SA 240 304L Polished Plate is subjected to chip breaking and work hardening during deformation. SA240 Tp304L Perforated Plates are widely used for interior purposes. We have been supplying these ASTM A240 304L Slitting Coils to various customers in different industries.
Distributor & supplier of A240 Tp304L Flat Sheet and 304L Stainless Steel Coil, find SS 304L Shim price per kg in Mumbai
ASTM A240 304L Stainless Steel Sheet, Plate Specification
2B, No.4, BA polish 304L Stainless Steel Sheet supplier in India, Customer-specific Surface Finishes of SA 240 304L Polished Plate and SA240 Tp304L Perforated Plate stockist in Mumbai
304L Stainless Steel Material Specification: ASTM A240/ ASME SA240 304L Plate Stock Available
Grade: ASTM A240 / ASME SA240 SS 304 (UNS S30400, 1.4301), SS 304L (UNS S30403, 1.4306), SS 310S (UNS S31008, 1.4845), SS 316 (UNS S31600, 1.4401), SS 316Ti (UNS S31635, 1.4571), SS 316L (UNS S31603, 1.4404), SS 317L (UNS S31703, 1.4438), SS 321 (UNS S32100, 1.4541), SS 347 (UNS S34700, 1.455), SS 410 (UNS S41000, 1.4006) Plate, Sheet, Coils, Strips
Thickness: 4.0mm - 100mm
Size: 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finishes: 2D, 2B, 4Pol, BA, X10, XL, Buff, XL Blend S, SATIN (Met with Plastic Coated), NO(8), Hairline, NO.1, NO.4, Mirror Finish
Processing: Shearing to Custom Sizes
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Delivery: 15-20 days
Several colors, thicknesses and opacity options are available, Mill TC EN 10204 3.1, Third Party Inspection, NDT/DT Test Reports.
Types of ASTM A240 304L Stainless Steel Sheet, Plate
ASTM A240 UNS S30403 Strip
304L Stainless Steel Strip, SS 304L Strip
ASTM A240 UNS S30403 Shim Sheets
304L Stainless Steel Shim Sheets, SS 304L Shim Sheets
ASTM A240 UNS S30403 Sheets
304L Stainless Steel Sheets, SS 304L Sheets
ASTM A240 UNS S30403 Plates
304L Stainless Steel Plates, SS 304L Plates
ASTM A240 UNS S30403 Hot Rolled (HR) Sheets
304L Stainless Steel Hot Rolled (HR) Sheets, SS 304L HR Sheet
ASTM A240 UNS S30403 Hot Rolled (HR) Plate
304L Stainless Steel Hot Rolled (HR) Plate, SS 304L Hot Rolled (HR) Plate
ASTM A240 UNS S30403 Hot Rolled (HR) Coil
304L Stainless Steel Hot Rolled (HR) Coil, SS 304L Hot Rolled (HR) Coil
ASTM A240 UNS S30403 Foil
304L Stainless Steel Foil, SS 304L Foil
ASTM A240 UNS S30403 Diamond Plate
304L Stainless Steel Diamond Plate, SS 304L Diamond Plate
ASTM A240 UNS S30403 Cold rolled Plates (CR)
304L Stainless Steel Cold rolled Plates (CR), SS 304L CR Plate
ASTM A240 UNS S30403 Coils
304L Stainless Steel Coils, SS 304L Coils
ASTM A240 UNS S30403 Chequered Plate
304L Stainless Steel Chequered Plate, SS 304L Chequered Plate
Polished 304L Stainless Steel Plate
304L Stainless Steel Polished Plate, SS 304L Polished Plate
ASTM A240 UNS S30403 Blank
304L Stainless Steel Blank, SS 304L Blank
ASTM A240 UNS S30403 Circle
304L Stainless Steel Circle, SS 304L Circle
ASTM A240 UNS S30403 Stainless Steel 304L Plate suppliers Mumbai, India
Stainless Steel 304L Hot rolled plate (HR), Stainless Steel 304L Cold rolled Plates (CR), SS 304L Diamond Plate Mumbai, Polished SS 304L Plate suppliers in India.
ASTM A240 UNS S30403 Stainless Steel 304L Plate
304L Stainless Steel Plate is a sheet of SS with a thickness of 6mm or more. SS 304L Plate is used in applications where durability is more important than saving weight. It is used in automobiles where durability is required to pass crash testing.
ASTM A240 UNS S30403 Stainless Steel 304L Coils suppliers Mumbai, India
Stainless Steel 304L Hot rolled Coils (HR), Stainless Steel 304L Cold rolled Coils (CR) Mumbai, Polished SS 304L Coils suppliers in India
ASTM A240 UNS S30403 Stainless Steel 304L Coils
Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
ASTM A240 UNS S30403 Stainless Steel 304L Strips suppliers Mumbai, India
Stainless Steel 304L Hot rolled Strips (HR), Stainless Steel 304L Cold rolled Strips (CR) Mumbai, Polished SS 304L Strips suppliers in India.
ASTM A240 UNS S30403 Stainless Steel 304L Strips
ASTM A240 UNS S30403 Stainless Steel 304L Sheets suppliers Mumbai, India
Stainless Steel 304L Hot rolled Sheets (HR), Stainless Steel 304L Cold rolled Sheets (CR) Mumbai, Polished SS 304L Sheets suppliers in India.
ASTM A240 UNS S30403 Stainless Steel 304L Sheets
The only difference between SS 304L Sheet and SS 304L Plate is the gauge (thickness) of the metal. They both have very different uses, depending on the varying durability and weight requirements for different projects.
ASTM A240 UNS S30403 Stainless Steel 304L Foil suppliers Mumbai, India
Stainless Steel 304L Hot rolled Foil (HR), Stainless Steel 304L Cold rolled Foil (CR) Mumbai, Polished SS 304L Foil suppliers in India.
ASTM A240 UNS S30403 Stainless Steel 304L Foil
SS 304L Foil is a very thin sheet of Stainless Steel that has been hammered or rolled flat. SS 304L Foils can be made from any type of metal, although the most commonly found foils are aluminum foil and gold foil. Aluminum foil typically has a thickness of .03mm, although any sheet of metal with a thickness of less than 0.2mm is considered a foil.
304L Stainless Steel Sheet Finish/ Plate Finish (According to ASTM 480)
- No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish.
- No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls.
- Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.
- No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.
- No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives.
- No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.
- No.8 Finish It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.
ASTM A240 304L Stainless Steel Sheet, Plate Latest Price List
View 1.4307 Stainless Steel Shim Stock and ASTM A240 304L Slitting Coil tolerances in mm, dimensions, sizes, thickness chart, and weight
- ASTM A240 Stainless steel 304L SS Plate
FOB Price: US $2000-3000 / Ton
- Hot selling 201 430 series ASTM A240 304L stainless steel plate
FOB Price: US $1000-2000 / Ton
- 304 ASTM A240 TP304L Stainless Steel Plate
FOB Price: US $2550-4500 / Metric Ton
- ASTM A240 304L stainless steel plate
FOB Price: US $399-599 / Ton
- ASTM A240 304L stainless steel plate for foodstuff, biology, petroleum, nuclear energy medical equipment
FOB Price: US $1200-3500 / Ton
- 420hc ASTM A240 tp321 a240 480 304 stainless steel plate
FOB Price: US $1500-2500 / Ton
- Free sample ASTM A240 tp 304L stainless steel plate price
FOB Price: US $1000-2800 / Ton
- SS Plate 1mm thick ASTM A240 304L stainless steel plate price per kg
FOB Price: US $1150-1950 / Ton
- ASTM A240 UNS S32750 S32760 SS plate,hot rolled 2000mm width steel plate,ss plate used for construction
FOB Price: US $1000-3000 / Ton
- flat plate gas grill griddle 304L ASTM A240 304L stainless steel plate
FOB Price: US $2045.0 / Ton
- ASTM A240 Hot-Rolled SS304 plate/sheet/Coil, 06Cr19Ni10
FOB Price: US $1500-3500 / Ton
- Price For ASTM A240 304L Stainless Steel Decorative Plate
FOB Price: US $900-1200 / Ton
- China supplier interior decoration ASTM A240 304L stainless steel plate
FOB Price: US $1200-2800 / Ton
- ASTM Aisi 304L 2b stainless steel plate with SGS third party inspection
FOB Price: US $1.67-1.7 / Kilogram
- Fast Delivery ASTM A240 304L Stainless Steel Plate In Coils
FOB Price: US $1000-3000 / Ton
- Wholesale ASTM A240 304L stainless steel plate
FOB Price: US $1000-5000 / Ton
- AISI 304L 2B ASTM A240 304L Stainless Steel Plate,Sheet Steel, 0.5mm Thick Steel Sheet
FOB Price: US $1000-3000 / Ton
- ASTM A240 Type 304L Stainless Steel Chequered Plate
FOB Price: US $1076.92 / Ton
- ASTM A240 304L ss stainless steel shim plate
FOB Price: US $1500-3200 / Ton
- ASTM A240 304L SUS 304L stainless steel plate checkered plate price per kg
FOB Price: US $3000.0 / Ton
ASTM A240 304L Stainless Steel Sheet, Plate composition and properties
UNS S30403 SS Sheet Chemical Composition
| Grade |
C |
Ni |
Si |
N |
S |
Mn |
P |
Cr |
Mo |
| SS 304L |
min. |
- |
8.0 |
- |
- |
- |
- |
- |
18.0 |
- |
| max. |
0.030 |
12.0 |
0.75 |
0.10 |
0.030 |
2.0 |
0.045 |
20.0 |
SS WERKSTOFF NR. 1.4307 Plate Mechanical Properties
| Grade |
Tensile Strength (MPa) min |
Elongation (% in 50mm) min |
Yield Strength 0.2% Proof (MPa) min |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| SS 304L |
485 |
40 |
170 |
92 |
201 |
ASTM A240 304L Stainless Steel Sheet, Plate in AISI/SAE, DIN, Werkstoff grades or equivalents
| BS 970 1991 |
AISI/SAE |
Werkstoff |
| 304S11 |
304L |
1.4306 |
ASTM A240 304L Stainless Steel Sheet Weight Chart
Hot rolled, annealed and descaled DIN 1.4307 Coil Sheet, SA 240 GR 304L Strips, CRES 304L Rolling Plate and UNS S30403 Plate exporter in Mumbai
| |
Thickness (mm) |
| 0.3 |
0.4 |
0.5 |
0.6 |
0.7 |
0.8 |
0.9 |
1.0 |
1.2 |
1.5 |
2.0 |
3.0 |
| Grade |
Dimension (mm) |
Weight (kg/sheet) |
| 304L |
1000 x 2000 |
4.76 |
6.34 |
7.93 |
9.52 |
11.1 |
12.7 |
14.3 |
15.9 |
19.0 |
23.8 |
31.7 |
47.6 |
| 1219 x 2438 (4’ x 8’) |
7.07 |
9.43 |
11.8 |
14.1 |
16.5 |
18.9 |
21.2 |
23.6 |
28.3 |
35.4 |
47.1 |
70.7 |
| 1250 x 2500 |
7.43 |
9.91 |
12.4 |
14.9 |
17.3 |
19.8 |
22.3 |
24.8 |
29.7 |
37.2 |
49.6 |
74.3 |
| 1524 x 3048 (5’ x 10’) |
11.1 |
14.7 |
18.4 |
22.1 |
25.8 |
29.5 |
33.2 |
36.8 |
44.2 |
55.3 |
73.3 |
110.5 |
| 430 |
1000 x 2000 |
4.62 |
6.16 |
7.70 |
9.24 |
10.8 |
12.3 |
13.9 |
15.4 |
18.5 |
23.1 |
30.8 |
46.2 |
| 1219 x 2438 (4’ x 8’) |
6.87 |
9.15 |
11.4 |
13.7 |
16.0 |
18.3 |
20.6 |
22.9 |
27.5 |
34.3 |
45.8 |
68.7 |
| 1250 x 2500 |
7.22 |
9.63 |
12.0 |
14.4 |
16.8 |
19.3 |
21.7 |
24.1 |
28.9 |
36.1 |
48.1 |
72.2 |
ASTM A240 304L Stainless Steel Sheet, Plate Types
- BS EN 10088-2 1.4301 / 1.4307 to the European standard.
- ASTM A240 304 / 304L OR ASTM A240 / ASME SA240 304 / 304L to the American pressure vessel standards.
Related Specs & Trade Names
1.4301, 1.4307, 304/304L, Grade 304, Grade 304L, Alloy 304, Alloy 304L, AISI 304L, TYPE 304, UNS S30400, UNS S30403, UNS S30409, X2CrNi18-9, ASTM A240, ASME SA240, 304 Stainless, 304, 304L, 304H,
ASTM A240 Stainless Steel 304L Sheet
- Type 304L Sheet Polished 240 grit, white poly coat
- Type 304L Sheet 2B finish
- Type 304L Plate Polished 240 grit, white poly coat
- Type 304L Plate 2B finish
- Type 304L Sheet 2R (BA) Finish
- Type 304L Plate 2R (BA) Finish
ASTM A240 Stainless Steel 304L Plate
- Plate Cold Rolled in 304L
- CPP Plate in 304L 1D Finish
- Type 304L Tread plate
Perforated Stainless Steel Sheets
- Perforated Stainless Steel sheet Grade 304L
- Perforated Stainless Steel Grade 304L
