ASTM A240 Type 316L Strip and SS 316L Plate supplier in Mumbai
316 is austenitic grade steel that is used to manufacture sheets and plates. However, it also has a low carbon version that is denoted by the letter ‘L’. Stainless Steel 316L Sheet is a low carbon content steel sheet. Due to the low carbon content,the Stainless Steel 316L Plate avoids carbide precipitation. Moreover, ASTM A240 Type 316L also offers qualities such as flawless finish, durability, reliability, superior tensile, and resistance to corrosion. ASTM A240 Grade 316L annealing requires heating these sheets in the temperature range of 1038 degrees C to 1149 degrees C.
SS 316L Plate also provides higher creep, and stress to rupture properties at elevated temperatures. The low content of carbon in the 316L 2b Stainless Steel Sheet also reduces the risk of invasive corrosion for usage in medical implants. UNS S31603 Plate also avoids sensitization. 316L Stainless Steel Coil has a density of 8000 kg/m3. 316L Stainless Steel Strip has reduced grain boundary precipitation. This makes the SA240 316L Clad Plate useful in heavy gauge welded components. In cryogenic temperatures as well these A240 GR 316L Rolling Plate offer outstanding toughness. A240 Tp316L Slit Coil is available in 0.2 mm to 120 mm in thickness.
ASTM A240 316L Perforated Plate is magnetic in nature. Hence they cannot be hardened by heat treatment. A240 Tp 316L Hot rolled Plate is used in food preparation equipment specifically in chloride environments. Moreover, these AISI 316L EN 1.4404 Rolling Sheets are also used in pollution control equipment, paper, and pulp industry, and valve and pump trim. Furthermore, 316L 2b Stainless Steel Flat Sheet is also used in textile, pharmaceutical industries, and heat exchangers. ASTM A240 Type 316L Shim Stock is available with us throughout the year due to the high demand for it. 316L Stainless Steel Polished Plate maintainsa full level of ductility and toughness and is said to work-harden at a high strength level. We as one of the leading SS 316L plate suppliers recommend these sheets due to the above mentioned features.
Distributor & supplier of 316L Stainless Steel Coil and UNS S31603 Plate, view ASTM A240 Type 316L Shim Stock price list
ASTM A240 316L Stainless Steel Sheet, Plate Specification
Distributor of 316L Stainless Steel Strip and A240 Tp 316L Hot rolled Plate, specific polish like 2B, No. 4 PE SS 316L Plate suppliers in India
316L Stainless Steel Material Specification: ASTM A240/ ASME SA240 316L Plate Stock Available
Grade: ASTM A240 / ASME SA240 SS 304 (UNS S30400, 1.4301), SS 304L (UNS S30403, 1.4306), SS 310S (UNS S31008, 1.4845), SS 316 (UNS S31600, 1.4401), SS 316Ti (UNS S31635, 1.4571), SS 316L (UNS S31603, 1.4404), SS 317L (UNS S31703, 1.4438), SS 321 (UNS S32100, 1.4541), SS 347 (UNS S34700, 1.455), SS 410 (UNS S41000, 1.4006) Plate, Sheet, Coils, Strips
Thickness: 4.0mm - 100mm
Size: 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finishes: 2D, 2B, 4Pol, BA, X10, XL, Buff, XL Blend S, SATIN (Met with Plastic Coated), NO(8), Hairline, NO.1, NO.4, Mirror Finish
Processing: Shearing to Custom Sizes
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Delivery: 15-20 days
Several colors, thicknesses and opacity options are available, Mill TC EN 10204 3.1, Third Party Inspection, NDT/DT Test Reports.
Types of ASTM A240 316L Stainless Steel Sheet, Plate
ASTM A240 UNS S31603 Strip
316L Stainless Steel Strip, SS 316L Strip
ASTM A240 UNS S31603 Shim Sheets
316L Stainless Steel Shim Sheets, SS 316L Shim Sheets
ASTM A240 UNS S31603 Sheets
316L Stainless Steel Sheets, SS 316L Sheets
ASTM A240 UNS S31603 Plates
316L Stainless Steel Plates, SS 316L Plates
ASTM A240 UNS S31603 Hot Rolled (HR) Sheets
316L Stainless Steel Hot Rolled (HR) Sheets, SS 316L HR Sheet
ASTM A240 UNS S31603 Hot Rolled (HR) Plate
316L Stainless Steel Hot Rolled (HR) Plate, SS 316L Hot Rolled (HR) Plate
ASTM A240 UNS S31603 Hot Rolled (HR) Coil
316L Stainless Steel Hot Rolled (HR) Coil, SS 316L Hot Rolled (HR) Coil
ASTM A240 UNS S31603 Foil
316L Stainless Steel Foil, SS 316L Foil
ASTM A240 UNS S31603 Diamond Plate
316L Stainless Steel Diamond Plate, SS 316L Diamond Plate
ASTM A240 UNS S31603 Cold rolled Plates (CR)
316L Stainless Steel Cold rolled Plates (CR), SS 316L CR Plate
ASTM A240 UNS S31603 Coils
316L Stainless Steel Coils, SS 316L Coils
ASTM A240 UNS S31603 Chequered Plate
316L Stainless Steel Chequered Plate, SS 316L Chequered Plate
Polished 316L Stainless Steel Plate
316L Stainless Steel Polished Plate, SS 316L Polished Plate
ASTM A240 UNS S31603 Blank
316L Stainless Steel Blank, SS 316L Blank
ASTM A240 UNS S31603 Circle
316L Stainless Steel Circle, SS 316L Circle
ASTM A240 UNS S31603 Stainless Steel 316L Plate suppliers Mumbai, India
Stainless Steel 316L Hot rolled plate (HR), Stainless Steel 316L Cold rolled Plates (CR), SS 316L Diamond Plate Mumbai, Polished SS 316L Plate suppliers in India.
ASTM A240 UNS S31603 Stainless Steel 316L Plate
316L Stainless Steel Plate is a sheet of SS with a thickness of 6mm or more. SS 316L Plate is used in applications where durability is more important than saving weight. It is used in automobiles where durability is required to pass crash testing.
ASTM A240 UNS S31603 Stainless Steel 316L Coils suppliers Mumbai, India
Stainless Steel 316L Hot rolled Coils (HR), Stainless Steel 316L Cold rolled Coils (CR) Mumbai, Polished SS 316L Coils suppliers in India
ASTM A240 UNS S31603 Stainless Steel 316L Coils
Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
ASTM A240 UNS S31603 Stainless Steel 316L Strips suppliers Mumbai, India
Stainless Steel 316L Hot rolled Strips (HR), Stainless Steel 316L Cold rolled Strips (CR) Mumbai, Polished SS 316L Strips suppliers in India.
ASTM A240 UNS S31603 Stainless Steel 316L Strips
ASTM A240 UNS S31603 Stainless Steel 316L Sheets suppliers Mumbai, India
Stainless Steel 316L Hot rolled Sheets (HR), Stainless Steel 316L Cold rolled Sheets (CR) Mumbai, Polished SS 316L Sheets suppliers in India.
ASTM A240 UNS S31603 Stainless Steel 316L Sheets
The only difference between SS 316L Sheet and SS 316L Plate is the gauge (thickness) of the metal. They both have very different uses, depending on the varying durability and weight requirements for different projects.
ASTM A240 UNS S31603 Stainless Steel 316L Foil suppliers Mumbai, India
Stainless Steel 316L Hot rolled Foil (HR), Stainless Steel 316L Cold rolled Foil (CR) Mumbai, Polished SS 316L Foil suppliers in India.
ASTM A240 UNS S31603 Stainless Steel 316L Foil
SS 316L Foil is a very thin sheet of Stainless Steel that has been hammered or rolled flat. SS 316L Foils can be made from any type of metal, although the most commonly found foils are aluminum foil and gold foil. Aluminum foil typically has a thickness of .03mm, although any sheet of metal with a thickness of less than 0.2mm is considered a foil.
316L Stainless Steel Sheet Finish/ Plate Finish
- No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish.
- No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls.
- Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.
- No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.
- No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives.
- No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.
- No.8 Finish It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.
ASTM A240 316L Stainless Steel Sheet, Plate Latest Price List
Hot rolled, annealed and pickled Stainless Steel 316L Plate and ASTM A240 Grade 316L Slit Coil stockist in India
- ASTM A240 Stainless steel 316L SS Plate
FOB Price: US $2000-3000 / Ton
- Hot selling 201 430 series ASTM A240 316L stainless steel plate
FOB Price: US $1000-2000 / Ton
- 304 ASTM A240 TP316L Stainless Steel Plate
FOB Price: US $2550-4500 / Metric Ton
- ASTM A240 316L stainless steel plate
FOB Price: US $399-599 / Ton
- ASTM A240 316L stainless steel plate for foodstuff, biology, petroleum, nuclear energy medical equipment
FOB Price: US $1200-3500 / Ton
- 420hc ASTM A240 tp321 a240 480 304 stainless steel plate
FOB Price: US $1500-2500 / Ton
- Free sample ASTM A240 tp 316L stainless steel plate price
FOB Price: US $1000-2800 / Ton
- SS Plate 1mm thick ASTM A240 316L stainless steel plate price per kg
FOB Price: US $1150-1950 / Ton
- ASTM A240 UNS S32750 S32760 SS plate,hot rolled 2000mm width steel plate,ss plate used for construction
FOB Price: US $1000-3000 / Ton
- flat plate gas grill griddle 316L ASTM A240 316L stainless steel plate
FOB Price: US $2045.0 / Ton
- ASTM A240 Hot-Rolled SS304 plate/sheet/Coil, 06Cr19Ni10
FOB Price: US $1500-3500 / Ton
- Price For ASTM A240 316L Stainless Steel Decorative Plate
FOB Price: US $900-1200 / Ton
- China supplier interior decoration ASTM A240 316L stainless steel plate
FOB Price: US $1200-2800 / Ton
- ASTM Aisi 316L 2b stainless steel plate with SGS third party inspection
FOB Price: US $1.67-1.7 / Kilogram
- Fast Delivery ASTM A240 316L Stainless Steel Plate In Coils
FOB Price: US $1000-3000 / Ton
- Wholesale ASTM A240 316L stainless steel plate
FOB Price: US $1000-5000 / Ton
- AISI 316L 2B ASTM A240 316L Stainless Steel Plate,Sheet Steel, 0.5mm Thick Steel Sheet
FOB Price: US $1000-3000 / Ton
- ASTM A240 Type 316L Stainless Steel Chequered Plate
FOB Price: US $1076.92 / Ton
- ASTM A240 316L ss stainless steel shim plate
FOB Price: US $1500-3200 / Ton
- ASTM A240 316L SUS 316L stainless steel plate checkered plate price per kg
FOB Price: US $3000.0 / Ton
ASTM A240 316L Stainless Steel Sheet, Plate composition and properties
Equivalent Grades
| STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
| SS 316L |
S31603 |
1.4404 / 1.4435 |
Z7CND17‐11‐02 |
X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SUS 316L |
316S11 / 316S13 |
03Ch17N14M3 / 03Ch17N14M2 |
UNS S31603 SS Sheet Chemical Composition
| Grade |
C |
Ni |
Si |
N |
S |
Mn |
P |
Cr |
Mo |
| SS 316L |
min. |
- |
10.0 |
- |
- |
- |
- |
- |
16.0 |
2.00 |
| max. |
18.0 |
14.0 |
0.75 |
0.10 |
0.03 |
2.00 |
0.045 |
18.0 |
3.00 |
SS WERKSTOFF NR. 1.4435 Plate Mechanical Properties
| Grade |
Tensile Strength (MPa) min |
Elongation (% in 50mm) min |
Yield Strength 0.2% Proof (MPa) min |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| SS 316L |
485 |
40 |
170 |
95 |
217 |
ASTM A240 316L Stainless Steel Sheet Weight Chart
Supplier of 316L 2b Stainless Steel Sheet and AISI 316L EN 1.4404 Rolling Sheet, Check SA240 316L Clad Plate/ Perforated Sheet standard sizes, dimensions, thickness, weight chart, and tolerances in mm
| |
Thickness (mm) |
| 0.3 |
0.4 |
0.5 |
0.6 |
0.7 |
0.8 |
0.9 |
1.0 |
1.2 |
1.5 |
2.0 |
3.0 |
| Grade |
Dimension (mm) |
Weight (kg/sheet) |
| 316L |
1000 x 2000 |
4.76 |
6.34 |
7.93 |
9.52 |
11.1 |
12.7 |
14.3 |
15.9 |
19.0 |
23.8 |
31.7 |
47.6 |
| 1219 x 2438 (4’ x 8’) |
7.07 |
9.43 |
11.8 |
14.1 |
16.5 |
18.9 |
21.2 |
23.6 |
28.3 |
35.4 |
47.1 |
70.7 |
| 1250 x 2500 |
7.43 |
9.91 |
12.4 |
14.9 |
17.3 |
19.8 |
22.3 |
24.8 |
29.7 |
37.2 |
49.6 |
74.3 |
| 1524 x 3048 (5’ x 10’) |
11.1 |
14.7 |
18.4 |
22.1 |
25.8 |
29.5 |
33.2 |
36.8 |
44.2 |
55.3 |
73.3 |
110.5 |
| 430 |
1000 x 2000 |
4.62 |
6.16 |
7.70 |
9.24 |
10.8 |
12.3 |
13.9 |
15.4 |
18.5 |
23.1 |
30.8 |
46.2 |
| 1219 x 2438 (4’ x 8’) |
6.87 |
9.15 |
11.4 |
13.7 |
16.0 |
18.3 |
20.6 |
22.9 |
27.5 |
34.3 |
45.8 |
68.7 |
| 1250 x 2500 |
7.22 |
9.63 |
12.0 |
14.4 |
16.8 |
19.3 |
21.7 |
24.1 |
28.9 |
36.1 |
48.1 |
72.2 |
ASTM A240 Stainless Steel 316L Sheet
- Type 316L Sheet Polished 240 grit, white poly coat
- Type 316L Sheet 2B finish
- Type 316L Plate Polished 240 grit, white poly coat
- Type 316L Plate 2B finish
- Type 316L Sheet 2R (BA) Finish
- Type 316L Plate 2R (BA) Finish
ASTM A240 Stainless Steel 316L Plate
- Plate Cold Rolled in 316L
- CPP Plate in 316L 1D Finish
- Type 316L Tread plate
Perforated Stainless Steel Sheets
- Perforated Stainless Steel sheet Grade 316L
- Perforated Stainless Steel Grade 316L
