ASTM A240 Type 321 Coil and SS 321 Plate supplier in India
Stainless steel is used to produce various products, sheets and plates being one of them. They are categorized into different grades and those grades in turn have various high and low versions of elements. Stainless Steel 321 Sheet is one such sheet that is stabilized using titanium. AMS 5510 Sheet offers good general corrosion resistance. SS 321 Plate also resists intergranular corrosion after being exposed to a temperature that falls in the range of chromium precipitation. AMS 5510 Stainless Steel Sheet also offers good creep and stress rupture properties. 321 Stainless Steel Plate also resists oxidation upto 1500 degrees F.
321 Stainless Steel Sheet also displays excellent low temperature toughness. SA240 Tp321 Rolling Plate can be hardened only by cold working. Heat treatment is not effective in hardening SA240 321 Clad Plate. Applications such as aerospace, chemical processing, expansion joints, food processing, and waste treatment use AISI 321 EN 1.4541 Rolling Sheet on a large scale. UNS S32100 Plate has a melting range of 1390 degrees C to 1446 degrees C. ASTM A240 321 Perforated Plate has been designed to be used in the chromium carbide precipitation range. This is because unlike other grades that are prone to intergranular corrosion A240 Tp 321 Hot rolled Plate does not face intergranular corrosion.
321 Stainless Steel Polished Plate can be used in a diluted form of organic acid at moderate temperature. Moreover, 321 2b Stainless Steel Sheet can also be used in pure phosphoric acid at low temperature and at elevated temperature in a 10% diluted solution. In hydrocarbon service 321 Stainless Steel Coil can resist polythionic acid stress corrosion cracking. Furthermore, ASTM A240 Type 321 Shim Stock can also be used in fluoride and chloride free caustic solution at a moderate temperature. 321 2b Stainless Steel Flat Sheet fail to display performance in chloride solution even in small concentration. A240 Tp321 Slit Coilis said to be less machinable due to the cold working. 321 Stainless Steel Strip produced by us display all the above mentioned advantages thereby reducing the effect of disadvantages.
Distributor & stockist of AMS 5510 Sheet and 321 Stainless Steel Strip, check UNS S32100 Plate price chart in Mumbai
ASTM A240 321 Stainless Steel Sheet, Plate Specification
Supplier of 321 Stainless Steel Plate and ASTM A240 321 Perforated Sheet in 2B, No.4, BA PE Surface Finishes, ask for a free sample now!
321 Stainless Steel Material Specification: ASTM A240/ ASME SA240 321 Plate Stock Available
Grade: ASTM A240 / ASME SA240 SS 304 (UNS S30400, 1.4301), SS 304L (UNS S30403, 1.4306), SS 310S (UNS S31008, 1.4845), SS 316 (UNS S31600, 1.4401), SS 316Ti (UNS S31635, 1.4571), SS 316L (UNS S31603, 1.4404), SS 317L (UNS S31703, 1.4438), SS 321 (UNS S32100, 1.4541), SS 347 (UNS S34700, 1.455), SS 410 (UNS S41000, 1.4006) Plate, Sheet, Coils, Strips
Thickness: 4.0mm - 100mm
Size: 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Finishes: 2D, 2B, 4Pol, BA, X10, XL, Buff, XL Blend S, SATIN (Met with Plastic Coated), NO(8), Hairline, NO.1, NO.4, Mirror Finish
Processing: Shearing to Custom Sizes
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Delivery: 15-20 days
Several colors, thicknesses and opacity options are available, Mill TC EN 10204 3.1, Third Party Inspection, NDT/DT Test Reports.
Types of ASTM A240 321 Stainless Steel Sheet, Plate
ASTM A240 UNS S32100 Strip
321 Stainless Steel Strip, SS 321 Strip
ASTM A240 UNS S32100 Shim Sheets
321 Stainless Steel Shim Sheets, SS 321 Shim Sheets
ASTM A240 UNS S32100 Sheets
321 Stainless Steel Sheets, SS 321 Sheets
ASTM A240 UNS S32100 Plates
321 Stainless Steel Plates, SS 321 Plates
ASTM A240 UNS S32100 Hot Rolled (HR) Sheets
321 Stainless Steel Hot Rolled (HR) Sheets, SS 321 HR Sheet
ASTM A240 UNS S32100 Hot Rolled (HR) Plate
321 Stainless Steel Hot Rolled (HR) Plate, SS 321 Hot Rolled (HR) Plate
ASTM A240 UNS S32100 Hot Rolled (HR) Coil
321 Stainless Steel Hot Rolled (HR) Coil, SS 321 Hot Rolled (HR) Coil
ASTM A240 UNS S32100 Foil
321 Stainless Steel Foil, SS 321 Foil
ASTM A240 UNS S32100 Diamond Plate
321 Stainless Steel Diamond Plate, SS 321 Diamond Plate
ASTM A240 UNS S32100 Cold rolled Plates (CR)
321 Stainless Steel Cold rolled Plates (CR), SS 321 CR Plate
ASTM A240 UNS S32100 Coils
321 Stainless Steel Coils, SS 321 Coils
ASTM A240 UNS S32100 Chequered Plate
321 Stainless Steel Chequered Plate, SS 321 Chequered Plate
Polished 321 Stainless Steel Plate
321 Stainless Steel Polished Plate, SS 321 Polished Plate
ASTM A240 UNS S32100 Blank
321 Stainless Steel Blank, SS 321 Blank
ASTM A240 UNS S32100 Circle
321 Stainless Steel Circle, SS 321 Circle
ASTM A240 UNS S32100 Stainless Steel 321 Plate suppliers Mumbai, India
Stainless Steel 321 Hot rolled plate (HR), Stainless Steel 321 Cold rolled Plates (CR), SS 321 Diamond Plate Mumbai, Polished SS 321 Plate suppliers in India.
ASTM A240 UNS S32100 Stainless Steel 321 Plate
321 Stainless Steel Plate is a sheet of SS with a thickness of 6mm or more. SS 321 Plate is used in applications where durability is more important than saving weight. It is used in automobiles where durability is required to pass crash testing.
ASTM A240 UNS S32100 Stainless Steel 321 Coils suppliers Mumbai, India
Stainless Steel 321 Hot rolled Coils (HR), Stainless Steel 321 Cold rolled Coils (CR) Mumbai, Polished SS 321 Coils suppliers in India
ASTM A240 UNS S32100 Stainless Steel 321 Coils
Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
ASTM A240 UNS S32100 Stainless Steel 321 Strips suppliers Mumbai, India
Stainless Steel 321 Hot rolled Strips (HR), Stainless Steel 321 Cold rolled Strips (CR) Mumbai, Polished SS 321 Strips suppliers in India.
ASTM A240 UNS S32100 Stainless Steel 321 Strips
ASTM A240 UNS S32100 Stainless Steel 321 Sheets suppliers Mumbai, India
Stainless Steel 321 Hot rolled Sheets (HR), Stainless Steel 321 Cold rolled Sheets (CR) Mumbai, Polished SS 321 Sheets suppliers in India.
ASTM A240 UNS S32100 Stainless Steel 321 Sheets
The only difference between SS 321 Sheet and SS 321 Plate is the gauge (thickness) of the metal. They both have very different uses, depending on the varying durability and weight requirements for different projects.
ASTM A240 UNS S32100 Stainless Steel 321 Foil suppliers Mumbai, India
Stainless Steel 321 Hot rolled Foil (HR), Stainless Steel 321 Cold rolled Foil (CR) Mumbai, Polished SS 321 Foil suppliers in India.
ASTM A240 UNS S32100 Stainless Steel 321 Foil
SS 321 Foil is a very thin sheet of Stainless Steel that has been hammered or rolled flat. SS 321 Foils can be made from any type of metal, although the most commonly found foils are aluminum foil and gold foil. Aluminum foil typically has a thickness of .03mm, although any sheet of metal with a thickness of less than 0.2mm is considered a foil.
ASTM A240 321H Stainless Steel Sheet, Plate
321 Stainless Steel Sheet Finish/ Plate Finish
- No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish.
- No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls.
- Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.
- No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.
- No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives.
- No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.
- No.8 Finish It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.
ASTM A240 321 Stainless Steel Sheet, Plate Latest Price List
Exporter of AMS 5510 Stainless Steel Sheet and ASTM A240 Type 321 Shim Stock as per international standards
- ASTM A240 Stainless steel 321 SS Plate
FOB Price: US $2000-3000 / Ton
- Hot selling 201 430 series ASTM A240 321 stainless steel plate
FOB Price: US $1000-2000 / Ton
- 304 ASTM A240 TP321 Stainless Steel Plate
FOB Price: US $2550-4500 / Metric Ton
- ASTM A240 321 stainless steel plate
FOB Price: US $399-599 / Ton
- ASTM A240 321 stainless steel plate for foodstuff, biology, petroleum, nuclear energy medical equipment
FOB Price: US $1200-3500 / Ton
- 420hc ASTM A240 tp321 a240 480 304 stainless steel plate
FOB Price: US $1500-2500 / Ton
- Free sample ASTM A240 tp 321 stainless steel plate price
FOB Price: US $1000-2800 / Ton
- SS Plate 1mm thick ASTM A240 321 stainless steel plate price per kg
FOB Price: US $1150-1950 / Ton
- ASTM A240 UNS S32750 S32760 SS plate,hot rolled 2000mm width steel plate,ss plate used for construction
FOB Price: US $1000-3000 / Ton
- flat plate gas grill griddle 321 ASTM A240 321 stainless steel plate
FOB Price: US $2045.0 / Ton
- ASTM A240 Hot-Rolled SS304 plate/sheet/Coil, 06Cr19Ni10
FOB Price: US $1500-3500 / Ton
- Price For ASTM A240 321 Stainless Steel Decorative Plate
FOB Price: US $900-1200 / Ton
- China supplier interior decoration ASTM A240 321 stainless steel plate
FOB Price: US $1200-2800 / Ton
- ASTM Aisi 321 2b stainless steel plate with SGS third party inspection
FOB Price: US $1.67-1.7 / Kilogram
- Fast Delivery ASTM A240 321 Stainless Steel Plate In Coils
FOB Price: US $1000-3000 / Ton
- Wholesale ASTM A240 321 stainless steel plate
FOB Price: US $1000-5000 / Ton
- AISI 321 2B ASTM A240 321 Stainless Steel Plate,Sheet Steel, 0.5mm Thick Steel Sheet
FOB Price: US $1000-3000 / Ton
- ASTM A240 Type 321 Stainless Steel Chequered Plate
FOB Price: US $1076.92 / Ton
- ASTM A240 321 ss stainless steel shim plate
FOB Price: US $1500-3200 / Ton
- ASTM A240 321 SUS 321 stainless steel plate checkered plate price per kg
FOB Price: US $3000.0 / Ton
ASTM A240 321 Stainless Steel Sheet, Plate composition and properties
| Grade |
|
C |
N |
Ni |
Si |
P |
S |
Mn |
Cr |
TI |
| SS 321 |
Min |
- |
- |
9.00 |
- |
- |
- |
- |
17.0 |
5(C+N) |
| max |
0.08 |
0.10 |
12.00 |
1.00 |
0.045 |
0.030 |
2.00 |
19.0 |
0.70 max |
SS WERKSTOFF NR. 1.4541 Plate Mechanical Properties
| Grade |
Tensile Strength (MPa) min |
Elongation (% in 50mm) min |
Yield Strength 0.2% Proof (MPa) min |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| SS 321 |
515 |
40 |
205 |
95 |
217 |
ASTM A240 321 Stainless Steel Sheet Weight Chart
Check AISI 321 EN 1.4541 Rolling Sheet, A240 Tp 321 Hot rolled Plate, Slit Coil and 321 Stainless Steel Sheet weights, Thickness chart, coating, length, and size
| |
Thickness (mm) |
| 0.3 |
0.4 |
0.5 |
0.6 |
0.7 |
0.8 |
0.9 |
1.0 |
1.2 |
1.5 |
2.0 |
3.0 |
| Grade |
Dimension (mm) |
Weight (kg/sheet) |
| 321 |
1000 x 2000 |
4.76 |
6.34 |
7.93 |
9.52 |
11.1 |
12.7 |
14.3 |
15.9 |
19.0 |
23.8 |
31.7 |
47.6 |
| 1219 x 2438 (4’ x 8’) |
7.07 |
9.43 |
11.8 |
14.1 |
16.5 |
18.9 |
21.2 |
23.6 |
28.3 |
35.4 |
47.1 |
70.7 |
| 1250 x 2500 |
7.43 |
9.91 |
12.4 |
14.9 |
17.3 |
19.8 |
22.3 |
24.8 |
29.7 |
37.2 |
49.6 |
74.3 |
| 1524 x 3048 (5’ x 10’) |
11.1 |
14.7 |
18.4 |
22.1 |
25.8 |
29.5 |
33.2 |
36.8 |
44.2 |
55.3 |
73.3 |
110.5 |
| 430 |
1000 x 2000 |
4.62 |
6.16 |
7.70 |
9.24 |
10.8 |
12.3 |
13.9 |
15.4 |
18.5 |
23.1 |
30.8 |
46.2 |
| 1219 x 2438 (4’ x 8’) |
6.87 |
9.15 |
11.4 |
13.7 |
16.0 |
18.3 |
20.6 |
22.9 |
27.5 |
34.3 |
45.8 |
68.7 |
| 1250 x 2500 |
7.22 |
9.63 |
12.0 |
14.4 |
16.8 |
19.3 |
21.7 |
24.1 |
28.9 |
36.1 |
48.1 |
72.2 |
ASTM A240 Stainless Steel 321 Sheet
- Type 321 Sheet Polished 240 grit, white poly coat
- Type 321 Sheet 2B finish
- Type 321 Plate Polished 240 grit, white poly coat
- Type 321 Plate 2B finish
- Type 321 Sheet 2R (BA) Finish
- Type 321 Plate 2R (BA) Finish
ASTM A240 Stainless Steel 321 Plate
- Plate Cold Rolled in 321
- CPP Plate in 321 1D Finish
- Type 321 Tread plate
Perforated Stainless Steel Sheets
- Perforated Stainless Steel sheet Grade 321
- Perforated Stainless Steel Grade 321
Permissible Raw Materials
| JIS G4304 |
ASTM |
UNS |
KS |
EN10095 |
AS |
CNS |
| SUS321 |
321 |
S32100 |
STS321 |
1.4541 Plate |
321 |
321 |
