Stainless Steel 347H Pipe and ASTM A312 TP347H Seamless/ ERW Tube

SS 347H Welded Pipe & UNS S34709 Round Pipe supplier in India

The 347H is a higher carbon version of the 347 alloys. The Stainless Steel 347H Pipe/ Tube possesses higher creep resistance and can work in high temperatures and pressures. The higher carbon content of 0.04-0.10 percent enables dual certification in this grade. The Stainless Steel 347H Pipe is stabilized to provide good protection against corrosion. It also has good oxidation resistance similar to that of other austenitic steel. The 347H Stainless Steel Tube is used in heavy welded materials wherein; annealing is not possible. These tubes work best at temperatures up to 1600 degrees F. The Stainless Steel 1.4961 Tubing is widely used in cabin heaters, aircraft exhausts, oil and gas refining systems, heat exchanger tubes, casings of boiler tubes, etc. We are the top suppliers of Stainless Steel 347H Pipe/ Tube. Our goal is to provide our customers with the best products at reasonable rates.

The 347H Stainless Steel Tube possesses good hardness of 201 Brinell. These tubes can be produced by either a seamless or a welding procedure and have a melting range of 1450 degrees C. The Stainless Steel 347H Seamless Pipe is manufactured with excellent tensile and yield strength, of above 515Mpa and 205Mpa respectively. These pipes are made with single sheet steel so, are very strong. The SS 347H Welded Pipe doesn’t encounter problems of intergranular corrosion or sensitization faced by the 304 and 304L grades. These pipes have a good density of 7.96 g/cm3. The 347H SS ERW Pipe is available in ½-24 NB. These pipes are welded spirally or longitudinally by passing electricity through them. These pipes are known for their high and low-frequency resistance. The ASTM A312 TP 347H Pipe has extra toughness due to the excess amount of carbon in its concentration. These pipes can be easily elongated by 40% and still possess good strength. All our products including the 347H Stainless Steel Pipe can be customized in different shapes and sizes as per your requirements. Our renowned workers make use of the best raw materials and the latest technology, while producing the SA 312 TP 347H Rectangular Pipe, along with our other products.

The AISI 347H Schedule 40 Pipe covers dimensions for both high and low temperatures and pressures. These pipes are available in sizes of an outer diameter of 1/8 to 8 inches. The UNS S34709 Round Pipe is widely used in supplying gases and water from one place to the other. These pipes are produced by passing a billet through a single piece of steel or by welding steel together. The DIN 1.4961 Stainless Steel Square Pipe is produced by running a series of coils through dies. These pipes are welded on the interior to give them the desired shape. If you have any queries or want to know more about the 347H 1.4961 Polished Pipe, contact us for more information.

Looking for ASME B36.10 and B36.19 Stainless Steel 347H Seamless Pipe suppliers? Wide inventory of SA 312 TP 347H ERW Pipe & 347H SS Rectangular Pipe in Mumbai

Table of Content

Specification Standards of Stainless Steel 347H Pipe
SS 347H Welded Pipe Chemical Composition Standard
347H Stainless Steel Pipe Mechanical Behaviour
Equivalent Grades Of Stainless Steel 347H Seamless Pipe
347H Stainless Steel Tube Weight Chart
Dimension Chart of UNS S34709 Round Pipe
Pressure rating of AISI 347H Schedule 40 Pipe<

Specification Standards of Stainless Steel 347H Pipe

International Specification	ASTM A312/ ASME SA 312 TP 347H
Seamless Pipes Size	Outer Diameter: 4 to 219mm Wall Thickness: 0.5 to 20mm
Welded Pipe Size	Outer Diameter: 5.0 - 1219.2 mm
EFW Pipe Size	Outer Diameter: 5.0 - 1219.2 mm
Wall Thickness	Schedule 5, Schedule 40, Schedule10, Schedule 80, Schedule 160, Schedule 80S, Schedule XXS, Schedule XS
techniques	EFW/ Seamless / ERW / Welded / LSAW/ Fabricated / Seam-Welded / CDW/ Redrawn
Form	Round, Square, Rectangular
Length	Double Random & Required Length End, Single Random, Plain End, Treaded, Beveled End
Condition	Hot Finished, Annealed and Pickled, Bright Annealed, Polished, Cold Drawn

SS 347H Welded Pipe Chemical Composition Standard

Looking for Stainless Steel 1.4961 Tubing in specific length? We supply all types of AISI 347H Schedule 40 Pipe & ASTM A312 TP 347H Round Pipe in various sizes

Stainless Steel		Nickel	Magnesium	Silicon	sulfur	Carbon	Chromium	Phosphorus	Molybdenum	Nitrogen
347H	Minimum	9				00.04	17		3
347H	Maximum	13	2	1	00.030	00.10	19	00.045	4

347H Stainless Steel Pipe Mechanical Behaviour

SS Grade	Tensile Strength	Yield Strength	Elongation	Hardness
				Rockwell B	Brinell
SS 347H	515	205	40	92	201

Equivalent Grades Of Stainless Steel 347H Seamless Pipe

Material	WERKSTOFF NR.	UNS
	GermanN	Usa
TP347H	1.4961	S34709

347H Stainless Steel Tube Weight Chart

Stockholder of 347H Stainless Steel Tube and 347H 1.4961 Polished Pipe from 6.20 mm To 152 mm OD

Nominal Pipe Sizes	Outside Diameter		Wall Thickness			Weight	Weight
Nominal Pipe Sizes	Inch	MM	Inch	MM	Schedule	kg/Meter	Lbs/feet
1/2	0.840	21	0.109	2.769	40 STD	1.268	0.851
			0.147	3.734	80 STD	1.621	1.088
3/4	1.050	27	0.113	2.870	40 STD	1.684	1.131
			0.154	3.912	80 STD	2.195	1.474
1	1.315	33	0.133	3.378	40 STD	2.501	1.679
			0.179	4.547	80 STD	3.325	2.172
1 1/4	1.660	42	0.140	3.556	40 STD	3.385	2.273
			0.191	4.851	80 STD	4.464	2.997
1 1/2	1.900	48	0.145	3.683	40 STD	4.048	2.718
			0.200	5.080	80 STD	5.409	3.361
2	2.375	60	0.154	3.912	40 STD	5.441	3.653
			0.218	5.537	80 STD	7.480	5.022
2 1/2	2.875	73	0.203	5.516	40 STD	8.629	5.793
			0.276	7.010	80 STD	11.411	7.661
3	3.500	89	0.216	5.486	40 STD	11.284	7.576
			0.300	7.620	80 STD	15.272	10.253
4	4.500	114	0.237	6.020		16.073	10.790
			0.337	8.560		22.318	14.983
6	6.625	168	0.188	4.775		19.252	12.924
			0.203	5.516		20.739	13.923
			0.219	5.563		22.318	14.983
			0.250	6.350		25.354	17.021
			0.280	7.112	40 STD	58.263	18.974
			0.312	7.925		31.334	21.036
			0.375	9.525		37.285	25.031
			0.432	10.973	80 XHY	42.561	28.573
			0.500	12.700		48.719	32.708
8	8.625	219	0.188	4.775		25.233	16.940
			0.203	5.156		27.198	18.259
			0.219	5.563		29.286	19.661
			0.250	6.350	20	33.308	22.361
			0.277	7.036	30	36.786	24.696
			0.322	8.179	40	42.352	28.554
			0.375	9.525		49.216	33.041
			0.406	10.312	60	53.085	35.638
			0.500	12.700	80 XHY	64.627	43.388
10	10.750	273	0.188	4.775		31.588	21.207
			0.219	5.563		36.689	24.631
			0.250	6.350	20	41.759	28.035
			0.307	7.798	30	51.002	34.240
			0.344	8.738		56.946	38.231
			0.365	9.271	40 STD	63.301	40.483
			0.438	11.125		71.852	48.238
			0.500	12.700	60 XHY	81.530	54.735
			0.594	15.088	80	95.969	64.429
12	12.750	324	0.188	4.775		37.570	25.222
			0.219	5.563		43.657	29.309
			0.250	6.350		49.713	33.375
			0.281	7.137		55.739	37.420
			0.312	7.925		61.735	41.445
			0.375	9.525		73.824	49.562
			0.406	10.312		79.727	53.525
			0.500	12.700		97.438	65.415
			0.562	14.275		108.966	73.154
14	14.000	356	0.188	4.775		41.308	27.732
			0.219	5.563		48.012	32.233
			0.250	6.350	20	54.685	36.713
			0.281	7.137		61.327	41.172
			0.312	7.925		67.939	45.611
			0.375	9.525	STD	81.281	54.568
			0.438	11.125	40	94.498	63.441
			0.500	12.700	XHY	107.381	72.090
			0.625	15.875		132.983	89.278
16”	16.000	406	0.188	4.775		47.290	21.748
			0.219	5.563		54.980	36.910
			0.250	6.350	10	62.639	42.053
			0.281	7.137		70.268	47.174
			0.312	7.925	20	77.866	52.275
			0.344	8.738		85.677	57.519
			0.375	9.525	30 STD	93.213	62.578
			0.438	11.125		108.433	72.797
			0.500	12.700	40 XHY	123.289	82.770
18	18.000	457	0.219	5.563		61.948	41.588
			0.250	6.350		70.593	47.393
			0.281	7.137		79.208	53.176
			0.312	7.925	20	87.792	58.939
			0.375	9.525	STD	105.144	70.588
			0.438	11.125	30	122.369	82.152
			0.500	12.700	XHY	139.198	93.450
			0.562	14.275	40	155.904	104.666
			0.625	15.875		172.754	115.978
20	20.000	508	0.250	6.350		78.547	52.733
			0.282	7.163		88.458	59.386
			0.312	7.925		97.719	65.604
			0.375	9.525	20 STD	117.075	78.598
			0.438	11.125		136.305	91.508
			0.500	12.700	30 XHY	155.106	104.130
			0.594	15.088	40	183.378	123.110
			0.625	15.875		192.640	129.328
			0.688	17.475		211.368	141.901
24	24.000	610	0.250	6.350		94.456	63.413
			0.281	7.137		106.029	71.183
			0.312	7.925		117.573	18.932
			0.375	9.525	20 STD	140.938	64.618
			0.438	11.125		164.176	110.219
			0.500	12.700	XHY	186.923	125.490
			0.625	15.875		232.410	156.028
			0.688	17.475	40	255.148	171.293
			0.750	19.050		277.401	186.233
30	30.000	762	0.250	6.350		118.318	79.433
			0.281	7.137		132.851	89.189
			0.312	7.925	10	147.353	98.925
			0.375	9.525	STD	176.731	118.648
			0.438	11.125		205.983	138.286
			0.500	12.700	20 XHY	234.647	157.530
			0.625	15.875	30	292.066	196.078
			0.688	17.475		320.817	215.380
			0.750	19.050		348.988	234.293
36	36.000	914	0.250	6.350		142.180	95.453
			0.281	7.137		159.672	107.196
			0.312	7.925	10	177.133	118.918
			0.375	9.525	STD	215.525	142.678
			0.438	11.125		247.790	166.353
			0.500	12.700	20 XHY	282.372	198.570
			0.625	15.875		351.723	236.128
			0.688	17.475		386.487	259.467
			0.750	19.050		420.576	282.353
42	42.000	1067	0.312	7.925		206.914	138.911
			0.375	9.525	STD	248.319	166.708
			0.500	12.700	XHY	33.097	221.610
			0.750	19.050		492.163	330.413
48	48.000	1219	0.375	9.525	STD	284.112	190.738
			0.438	11.125		331.404	222.487
			0.500	12.700	XHY	377.822	253.650
			0.750	19.050		563.750	378.473
			0.875	22.225		655.969	440.383

Dimension Chart of UNS S34709 Round Pipe

Exporter of fabricated & Large dia 347H Stainless Steel Pipe & DIN 1.4961 Square Pipe in India

Nominal size in inches	Outside diameter in inches	Outside diameter in mm	Wall thickness in inches	Wall thickness in mm	Weight [lbs/feet]	Weight [kg/meter]
1/8 6	0.41	10.3	0.068	1.73	0.24	0.37
1/4 8	0.54	13.7	0.088	2.24	0.42	0.63
3/8 10	0.68	17.1	0.091	2.31	0.57	0.84
1/2 15	0.84	21.3	0.109	2.77	0.85	1.27
3/4 20	1.05	26.7	0.113	2.87	1.13	1.69
1 25	1.32	33.4	0.133	3.38	1.68	2.5
1 1/4 32	1.66	42.2	0.14	3.56	2.27	3.39
1 1/2 40	1.9	48.3	0.145	3.68	2.72	4.05
2 50	2.375	60.3	0.154	3.91	3.65	5.44
2 1/2 65	2.875	73	0.203	5.16	5.79	8.63
3 80	3.5	88.9	0.216	5.49	7.58	11.29
3 1/2 90	4	101.6	0.226	5.74	9.11	13.57
4 100	4.5	114.3	0.237	6.02	10.79	16.07
5 125	5.563	141.3	0.258	6.55	14.62	21.77
6 150	6.625	168.3	0.28	7.11	18.97	28.26
8 200	8.625	219.1	0.322	8.18	28.55	42.55
10 250	10.75	273	0.365	9.27	40.48	60.31
12 300	12.75	323.8	0.406	10.31	53.52	79.73
14 350	14	355.6	0.437	11.13	54.57	94.55
16 400	16	406.4	0.5	12.7	82.77	123.3
18 450	18	457	0.562	14.27	104.67	155.8
20 500	20	508	0.594	15.09	123.11	183.42
24 600	24	610	0.688	17.48	171.29	255.41
32 800	32	813	0.688	17.48	230.08	342.91

Pressure rating of AISI 347H Schedule 40 Pipe

Pipe Size in inches	Schedule	Outside Diameter in Inch	Wall Thickness in Inch	Temperature
				100	200	300	400	500	600	650	700	750
				Allowable Stress
				16700	16700	16700	15500	14400	13500	13200	12900	12600
1"	40	1.315	0.133	2205	2205	2205	2047	1902	1783	1743	1703	1664
	80	1.315	0.179	3061	3061	3061	2841	2640	2475	2420	2365	2310
	160	1.315	0.250	4493	4493	4493	4170	3874	3632	3552	3471	3390
1 1/2"	40	1.900	0.145	1629	1629	1629	1512	1404	1317	1287	1258	1229
	80	1.900	0.200	2303	2303	2303	2138	1986	1862	1821	1779	1738
	160	1.900	0.281	3362	3362	3362	3120	2899	2717	2657	2597	2536
2"	40	2.375	0.154	1371	1371	1371	1272	1182	1108	1083	1059	1034
	80	2.375	0.218	1985	1985	1985	1843	1712	1605	1569	1534	1498
	160	2.375	0.344	3283	3283	3283	3047	2831	2654	2595	2536	2477
3"	40	3.500	0.216	1301	1301	1301	1208	1122	1052	1028	1005	982
	80	3.500	0.300	1844	1844	1844	1712	1590	1491	1458	1425	1391
	160	3.500	0.438	2787	2787	2787	2587	2403	2253	2203	2153	2103
4"	40	4.500	0.237	1102	1102	1102	1023	950	891	871	851	831
	80	4.500	0.337	1596	1596	1596	1482	1377	1291	1262	1233	1204
	160	4.500	0.531	2611	2611	2611	2424	2552	2111	2064	2017	1970
5"	40	5.563	0.258	965	965	965	896	832	780	763	746	728
	80	5.563	0.375	1428	1428	1428	1325	1231	1154	1129	1103	1077
	160	5.563	0.625	2474	2474	2474	2296	2133	2000	1955	1911	1866
6"	40	6.625	0.280	877	877	877	814	756	709	693	677	661
	80	6.625	0.432	1379	1379	1379	1280	1189	1115	1090	1065	1040
	160	6.625	0.719	2382	2382	2382	2211	2054	1925	1883	1840	1797
8"	40	8.625	0.322	771	771	771	716	665	623	610	596	582
	80	8.625	0.500	1218	1218	1218	1131	1050	985	963	941	919
	160	8.625	0.906	2298	2298	2298	2133	1982	1858	1817	1775	1734
10"	40	10.750	0.365	699	699	699	649	603	565	553	540	528
	80	10.750	0.594	1159	1159	1159	1075	999	937	916	895	874
	160	10.750	1.125	2289	2289	2289	2124	1974	1850	1809	1768	1727