Condenser tubes are used to condense process fluid before entering the tube in the best way possible. The Stainless Steel Condenser Tubes are designed with superior corrosion and abrasion resistance properties. These tubes can be produced seamlessly, welded, fabricated, ERW, etc. They are available in lengths between 6mm OD to 219.1mm OD. The SS Condenser Tubes have good mechanical properties and superior strength. These tubes have a minimum tensile strength of 515Mpa and a minimum yield strength of 205Mpa. They possess a maximum hardness of 90HRB and a minimum elongation of 30%. We are the leading Condenser Tubing Suppliers in the country. We supply the best products through all our outlets in the country.
The Stainless Steel 316L Condenser Tubes are designed to suffice in high pressures and temperature systems. These tubes are used in applications, which require superior performance and strength to function properly. Stainless Steel 304 Condenser Tubes are low-cost tubes that exhibit medium tensile strength and corrosion resistance. These tubes are very reliable and easy to maintain. Our renowned workers make use of cutting-edge technology and the best SS Steam Condenser Tube Material to produce the best condensers. This is done following all international and national standards.
A Corrugated Stainless Steel Tubing Condenser is used to enhance the hydraulic and thermal capacities of the condenser. This tubing exhibits turbulence near the tube surface, which invariably reduces the thickness of the thermal boundary. The Condenser Tubing Heat SS is designed to give special impetus to heating, reheating and cooling gases and fluids in the system. All our products can be custom designed for our clients in different shapes, sizes, and chemical make-up. If you have any queries or want to get a quote on our products, contact us for more information.
| International Specification | ASTM A269, ASTM A213, ASTM A312 |
| Seamless Pipes Size |
|
| Welded Pipe Size |
|
| EFW Pipe Size |
|
| Wall Thickness | Schedule 5, Schedule 40, Schedule10, Schedule 80, Schedule 160, Schedule 80S, Schedule XXS, Schedule XS |
| techniques | EFW/ Seamless / ERW / Welded / LSAW/ Fabricated / Seam-Welded / CDW/ Redrawn |
| Form | Round, Square, Rectangular |
| Length | Double Random & Required Length End, Single Random, Plain End, Treaded, Beveled End |
| Condition | Hot Finished, Annealed and Pickled, Bright Annealed, Polished, Cold Drawn |
| Sizes in Inches | Sizes in Decimal | Sizes in MM |
| 1/16 | .0625 | 1.59 |
| 1/8 | .1250 | 3.18 |
| 3/16 | .1875 | 4.76 |
| 1/4 | .2500 | 6.35 |
| 5/16 | .3125 | 7.94 |
| 3/8 | .3750 | 9.53 |
| 7/16 | .4375 | 11.11 |
| 1/2 | .5000 | 12.70 |
| 9/16 | .5625 | 14.29 |
| 5/8 | .6250 | 15.88 |
| 11/16 | .6875 | 17.46 |
| 3/4 | .7500 | 19.05 |
| 13/16 | .8125 | 20.64 |
| 7/8 | .8750 | 22.23 |
| 15/16 | .9375 | 23.81 |
| 1 | 1.00 | 25.40 |
| 1 1/4 | 1.25 | 31.75 |
| 1 1/2 | 1.50 | 38.10 |
| 2 | 2.00 | 50.80 |
| ASTM A213 | Temperature Range (ºC) | Yield Stress | Tensile Stress | Elongation | Hardness |
|---|---|---|---|---|---|
| TP304H | 590 | 205 | 515 | 35 | 90 |
| TP310H | 590 | 205 | 515 | 35 | 90 |
| TP321H | 600 | 205 | 515 | 35 | 90 |
| TP347/347H | 610 | 205 | 515 | 35 | 90 |
| TP347HFG | 650 | 205 | 550 | 35 | 90 |
| TP316H | 610 | 205 | 515 | 35 | 90 |
| S30432 | 650 | 235 | 590 | 35 | 95 |
| TP310HCbN | 670 | 295 | 655 | 30 | 100 |
